Tutorial – Page 45 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet D1560 Printer series Printer – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the ink levels by using the software installed with the HP Deskjet. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts.

Which ink cartridges do I need for my HP Deskjet D1560 Printer Printer?

For your US, European and UK HP Deskjet D1560 Printer you need
HP 21 Black AND HP 22 Tri-color cartridges OR HP 21XL Black AND HP 22XL Tri-color cartridges.
There are also 2-Packs available, like the HP 21 Black and 22 Tri-color Original Ink Cartridges, 2 pack. Check the price of HP 21 and HP 22 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the printer cover. The carriage moves to the center of the printer. If the carriage does not move to the center, turn off the printer, and then turn it on again. Wait until the carriage is idle and silent before proceeding.

4. Press down on the empty cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the new cartridge by its sides, so that the copper strip is on the bottom and facing toward the printer. Slide the print cartridge firmly into the cradle at a slight upward angle until you feel resistance. Push the cartridge into the cradle. You hear a snap when the print cartridge is correctly positioned. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black print cartridge, slide it into the right slot.

When installing the cartridge and pressing it into the slot, do not rest your hand on top of the product for leverage. This might cause the carriage to lift out of position.

8. Repeat step 4 through 7 to replace the other cartridge, if needed.

9. Close the printer cover.

Align the new cartridge
10. After installing a print cartridge, align the print cartridges to ensure the best print quality. To align the print cartridges:
– Open the printer Software.
– Open the printer Toolbox.
– Click Align the Print Cartridges.
– Click Align, and then follow the onscreen instructions.
The HP Deskjet prints a test page, aligns the print cartridges, and calibrates the printer.
– Recycle or discard the test page.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3915 series Printer – an Illustrated Tutorial in 10 Steps

Which ink cartridges do I need for my HP Deskjet 3915 Printer?

For your US, European and UK HP Deskjet 3915 Printer you need
HP 21 Black AND HP 22 Tri-color cartridges OR HP 21XL Black AND HP 22XL Tri-color cartridges. There are also 2-Packs available, like the HP 21 Black and 22 Tri-color Original Ink Cartridges, 2 pack. Check the price of HP 21 and HP 22 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

When installing the cartridge and pressing it into the slot, do not rest your hand on top of the product for leverage. This might cause the carriage to lift out of position.

8. Repeat step 4 to 8 to replace the other cartridge, if needed.

9. Close the printer cover.

How to Replace an Empty Ink Cartridge in the HP ENVY 5534 e-All-in-One Series Printer

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP ENVY 5534 e-All-in-One Series Printer?

For your US HP ENVY 5534 e-All-in-One Series Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP ENVY 5534 e-All-in-One Series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Before you install the ink cartridges, load the paper tray with plain white paper.
2. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. Wait until the product is idle and silent before continuing.

Remove the old cartridge
3. Open the cartridge access door. To do this, locate the cutouts on the site of the printer. Use this cutouts to lift the cartridge access door and wait for the print carriage to move to the right side of the product.

4. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops. Pull up on the cartridge to remove it from the slot.

Insert the new cartridge
5. Remove the new ink cartridge from its package. Be careful to touch only the black plastic on the ink cartridge.

6. Remove the pink protective tape from the ink artridge.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the printer, and then slide the cartridge into the empty slot, and then squeeze the lid closed as the cartridge slides into place. The color cartridge is on the left, and the black cartridge is on the right.

8. Repeat steps 4 to 7 to install the other cartridge, if necessary.

9. Close the cartridge access door.

4. Close the scanner lid.

Align the cartridges when prompted to do so
The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. Aligning the cartridges ensures the high-quality output. If you remove and reinstall the same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges. Follow the instructions on the printer display to align the cartridges. You can also align the cartridges from the printer software.

A. To align the cartridges from the printer software
a. In the printer software, click Print & Scan, and then click Maintain Your Printer to access the Printer Toolbox.
b. In Printer Toolbox, click Align Ink Cartridges on the Device Services tab. The printer prints an alignment sheet.
c. Load the alignment sheet print side down on the right front corner of the scanner glass and follow the instructions on the printer display to align the cartridges. Recycle or discard the
cartridge alignment sheet.

B. To align the cartridges from the printer display
a. From the Home screen on the printer display, select Tools.
NOTE: If you do not see the Home screen, touch the Home button.
b. From the Tools menu on the printer display, select Align Printer. Follow the on-screen instructions.
c. Print a diagnostics page if the cartridges are not low on ink.

How to Replace an Empty Ink Cartridge in the HP ENVY 5640 e-All-in-One series Printer – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region (or have your old ones refilled). Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

Which ink cartridges do I need for my HP ENVY 5640 e-All-in-One Printer?

For your US, European and UK HP ENVY 5640 e-All-in-One Printer you need HP 62 Black AND HP 62 Tri-Color cartridges OR HP 62XL Black AND HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack. Check the price of HP 62 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

Remove the empty cartridge
3. Open the ink cartridge access door by placing two fingers under one or both of the small handles on the sides of the ink cartridge access door, and then lift up. The Door Open screen displays on the printer control panel with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ A Change Ink option also displays on the bottom right corner of the touchscreen. Touch Change Ink to watch a video on the touchscreen about replacing the cartridges (optional).

4. Lightly press down on the low or empty ink cartridge to release it. Pull it toward you out of its slot, and set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
5. Remove the new ink cartridge from its package. Be careful to touch only the black plastic on the ink cartridge.

6. Remove the protective tape from the ink cartridge.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then insert the ink cartridge into its correct slot. Push the ink cartridge forward into its slot until it snaps into place. Repeat these steps to install the other ink cartridge, if necessary. Insert the tri-color ink cartridge into the left slot. Insert the black ink cartridge into the right slot.

8. Close the ink cartridge access door. When the door is completely closed, the Door Open screen with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ disappears, and the printer returns to the Home screen. Touch OK. The printer prints an alignment sheet.

Align the cartridges
9. The HP All-in-One prompts you to align the cartridges every time you install a NEW cartridge. If you remove and reinstall the same ink cartridge, the HP All-in-One will not prompt you to align the ink cartridges. The HP Allin-One remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges.

10. Place the alignment page with the print side down on the scanner glass. Position it according to the engraved guides around the glass. Follow the instructions on the printer display to align the cartridges and then discard or recycle the alignment page.

If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display on the product.