series – Page 3 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet 2755 All-in-One series Printer – an Illustrated Tutorial in 11 Steps

Check the price of the HP Deskjet 2755e at Amazon.com .

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print almost 2 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Deskjet 2755 All-in-One Printer?

For your US HP DeskJet 2755 All-in-One Printer you need HP 67 Black AND HP 67 Tri-color cartridges OR the XL versions: HP 67XL Black AND HP 67XL Tri-color cartridges. Check the price of HP 67 cartridges at Amazon.com .

For your European or UK HP DeskJet 2755 All-in-One Printer you need HP 305 Black AND HP 305 Tri-color cartridges OR the XL versions: HP 305XL Black AND HP 305XL Tri-color cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused plain white Letter or A4-sized paper into the input tray.

Remove cartridge
3. Lower the output tray, reach inside the printer, grasp the handle, and then lower the ink cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

6. Pull the coloured tab to remove the plastic tape.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.
10. Close the cartridge access door.

Align the cartridges

11. To achieve the best print quality, it is always useful to align the ink cartridges. You can print the alignment page from the HP Smart app or from the printer software.

A. To print the alignment page from the printer software:

– Open the printer software.
– In the printer software, click Print & Scan.
– Click Maintain Your Printer to access the printer toolbox.
– Click Align Cartridges on the Device Services tab.

The printer prints an alignment page.

– Follow the onscreen instructions to align the cartridges.
– Recycle or discard the cartridge alignment sheet later.

How to Replace an Empty Ink Cartridge in the HP OfficeJet Pro 8022 series – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control panel or from the printer software. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until prompted to do so.

To check the estimated ink levels from the printer control panel:
– touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch the Ink Icon (see below) to check the estimated ink levels.

Which ink cartridges do I need for my HP OfficeJet Pro 8022 printer?

For your US HP OfficeJet Pro 8022 printer you need 1 HP 910 Black OR the XL-version HP 910XL Black AND 3 color cartridges: HP 910 Cyan/Magenta/Yellow OR the XL-version HP 910XL Cyan/Magenta/Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the HP 910 | 4 Ink Cartridges | Black, Cyan, Magenta, Yellow | 3YL61AN, 3YL58AN, 3YL59AN, 3YL60AN. Check the price of HP 910 cartridges at Amazon.com .

For your European or UK HP OfficeJet Pro 8022 printer you need 1 HP 912 Black OR the XL-version HP 912XL Black cartridge AND 3 color cartridges: HP 912 Cyan + HP 912 Magenta + HP 912 Yellow cartridges. OR the XL-version of the color cartridges: HP 912XL Cyan + HP 912XL Magenta + HP 912XL Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the HP 3YP34AE 912XL High Yield Original Ink Cartridge, Black/Cyan/Magenta/Yellow, Pack of 4.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges.

1. Look at the Power button located on the printer. If it is not lit, the printer is turned off. Press the Power button to turn on the printer. Wait until the product is idle and silent before continuing.

Remove the old cartridge
2. Open the front door.

3. Open the cartridge access door. Wait until the carriage is idle and silent before you proceed.

4. Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.

Insert the new cartridge
5. Remove the new ink cartridge from its packaging by pulling the orange pull-tab straight back to remove the plastic wrap from the ink cartridge. Make sure you remove the orange pull-tab completely. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to vent the cartridge. Do not touch the copper-colored electrical contacts and ink port.

6. Remove the orange cap from the cartridge. Hold the ink cartridge by its sides, and then twist the cap counter-clockwise until it snaps off. A forceful twist may be required to remove the cap.

7. Gently bend the tab away from the ink cartridge. Be careful not to bend the tab out more than 1.27 cm (0.5 in). Moving the tab too far might damage the ink cartridge or cause the tab to break.

8. Hold the ink cartridge so that the ink cartridge contacts are facing down and toward the printer. Match the colored dot on the ink cartridge with the dot of the same color on the carriage. Slide the new ink cartridge into its slot, and then gently press the ink cartridge down until it clicks into place and is seated firmly in the slot. Make sure that the color-coded letter on the cartridge matches that on the slot.

9. Repeat step 4 to 8 for each ink cartridge you are replacing.

10. Close the ink cartridge access door.

11. Close the front door.

Align the printhead only if necessary.
The printer automatically aligns the printhead during the initial setup. The printhead does not have to be realigned when cartridges are replaced. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. You can align the printhead from the printer display and from the HP printer software.

How to Replace an Empty Ink Cartridge in the HP OfficeJet Pro 8028 series – an Illustrated Tutorial in 11 Steps

Which ink cartridges do I need for my HP OfficeJet Pro 8028 printer?

For your US HP OfficeJet Pro 8028 printer you need 1 HP 910 Black OR the XL-version HP 910XL Black AND 3 color cartridges: HP 910 Cyan/Magenta/Yellow OR the XL-version HP 910XL Cyan/Magenta/Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the HP 910 | 4 Ink Cartridges | Black, Cyan, Magenta, Yellow | 3YL61AN, 3YL58AN, 3YL59AN, 3YL60AN. Check the price of HP 910 cartridges at Amazon.com .

For your European or UK HP OfficeJet Pro 8028 printer you need 1 HP 912 Black OR the XL-version HP 912XL Black cartridge AND 3 color cartridges: HP 912 Cyan + HP 912 Magenta + HP 912 Yellow cartridges. OR the XL-version of the color cartridges: HP 912XL Cyan + HP 912XL Magenta + HP 912XL Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the HP 3YP34AE 912XL High Yield Original Ink Cartridge, Black/Cyan/Magenta/Yellow, Pack of 4.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges.

Remove the old cartridge
2. Open the front door.

3. Open the cartridge access door. Wait until the carriage is idle and silent before you proceed.

4. Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.

6. Remove the orange cap from the cartridge. Hold the ink cartridge by its sides, and then twist the cap counter-clockwise until it snaps off. A forceful twist may be required to remove the cap.

7. Gently bend the tab away from the ink cartridge. Be careful not to bend the tab out more than 1.27 cm (0.5 in). Moving the tab too far might damage the ink cartridge or cause the tab to break.

9. Repeat step 4 to 8 for each ink cartridge you are replacing.

10. Close the ink cartridge access door.

11. Close the front door.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3056A series Printer – an Illustrated Tutorial in 10 Steps

You can easily check the ink supply level to determine how soon you might need to replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining in the cartridges.

To check the ink levels from the control panel:
– From the Control Panel home screen, which displays Copy, Scan, and Quick Forms, press the Setup button.
– Select Ink Status.

To check the ink levels from the Printer Software.
– Click the HP All-in-One desktop icon to open the printer software, or open the software from the Start Menu.
– In the Printer Software, click Estimated Ink Levels.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

You’ll usually install both the black and tri-color cartridges in the HP Deskjet, however, you can use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the printer can only print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 3056A Printer?

For your US HP Deskjet 3056A Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 3056A Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused plain white Letter or A4-sized paper into the input tray, if you have not already done so.

Remove the empty cartridge
3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot.
– Remove the cartridge from the slot on the left to replace the tri-color cartridge.
– Remove the cartridge from the slot on the right to replace the black cartridge

8. Repeat step 4 to 7 to replace the other cartridge, if necessary.

9. Close the cartridge access door.

10. Press the button next to OK on the control panel display. The printer prints an alignment page.

Align the cartridges
Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

– Lift the scanner lid.
– Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

– Close the scanner lid.
– Press the button next to OK on the control panel display. The product automatically aligns the cartridges.
– When the Alignment successful message displays on the control panel screen, press the button next to OK on the control panel display to complete the alignment.
– Discard or recycle the alignment page.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:
– In the HP Printer Software, click Printer Actions and then click Maintenence Tasks to access the Printer Toolbox. The Printer Toolbox appears.
– Click Align Ink Cartridges on the Device Services tab. The product prints an alignment sheet.
– Now go back to steps above.