Tutorial – Page 37 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet D2430 Printer series – an Illustrated Tutorial in 9 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the ink levels by using the software installed with the HP Deskjet. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts. We do not recommend using the photo print cartridge for ink-backup mode.

Which ink cartridges do I need for my HP Deskjet D2430 Printer?

Three print cartridges can be used with the printer.

1. Black print cartridge
2. Tri-color print cartridge
3. Photo print cartridge

For your US, European and UK HP Deskjet D2430 Printer you need HP 21 Black AND HP 22 Tri-color cartridges OR HP 21XL Black AND HP 22XL Tri-color cartridges. There are also 2-Packs available, like the HP 21 Black and 22 Tri-color Original Ink Cartridges, 2 pack. Check the price of HP 21 and HP 22 cartridges at Amazon.com .

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the printer cover. The carriage moves to the center of the printer. If the carriage does not move to the center, turn off the printer, and then turn it on again. Wait until the carriage is idle and silent before proceeding.

4. Press down on the empty cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black (OR photo) cartridge.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the new cartridge by its sides, so that the copper strip is on the bottom and facing toward the printer. Slide the new print cartridge at a slight upward angle into the empty slot. Then push firmly until the cartridge clicks into place. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black (OR photo) print cartridge, slide it into the right slot. Repeat these steps to replace the other cartridge, if needed.

When installing the cartridge and pressing it into the slot, do not rest your hand on top of the product for leverage. This might cause the carriage to lift out of position.

8. Close the printer cover. The product automatically prints a calibration page.

Align the new cartridge
9. After installing a print cartridge, align the print cartridges to ensure the best print quality:

– Open the printer Toolbox.
– Click Align the Print Cartridges.
– Click Align, and then follow the onscreen instructions. The HP Deskjet prints a test page, aligns the print cartridges, and calibrates the printer.
– Recycle or discard the test page.

How to Replace an Empty Ink Cartridge in the HP Photosmart 8750 series Printer – an Illustrated Tutorial in 12 Steps

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. However, (original) HP XL cartridges for the HP Photosmart 8750 printer are NOT available.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable. Use the ink-backup mode to operate the HP Photosmart 8750 with only one ink cartridge. The ink-backup mode is initiated when an ink cartridge is removed from the print cartridge cradle. Printing in ink-backup mode slows the printer and affects the quality of printouts. HP does not recommend using the photo print cartridge or the gray photo print cartridge for ink-backup mode.

Print cartridge combinations
Four print cartridges can be used with the printer:

1. Black print cartridge
2. Tri-color print cartridge
3. Photo print cartridge
4. Gray photo print cartridge

It appears that HP 101 and HP 102 cartridges are obsolete, although you might still find some online. The best combination now seems to be: black, tri-color, photo preferably HP 96 AND HP 97 AND HP 99 (OR 100). You must install all three cartridges in order for the printer to work as intended.

So, which ink cartridges do I need for my HP Photosmart 8750 Printer?

For your US HP Photosmart 8750 Printer you need HP 96 Black AND HP 97 Tri-color cartridges. Check the price of HP 96 and HP 97 cartridges at Amazon.com .
For printing photos use HP 99 Photo Original cartridges.
For printing high-quality black-and-white photographs use HP 100 Gray photo cartridges.

For your European or UK HP Photosmart 8750 Printer you need HP 339 Black AND HP 343 Tri-color cartridges.
For printing photos use HP 348 Photo cartridges.
For printing high-quality black-and-white photographs use HP 100 Gray photo cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.
2. Load plain unused Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Open the printer cover. Wait until the print cartridge cradle is idle and silent before you continue.

4. Press down lightly on top of the cartridge latch, pull out the bottom of the latch to unhook it and lift the print cartridge latch to the open position, then slide the print cartridge out of the print cartridge cradle.

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Use the symbols on the cartridge and cartridge latch to match up cartridge types:
– Left stall: HP Color Photo
– Middle stall: HP Tri-color
– Right Stall: HP Black OR HP Gray Photo (for high quality black-and-white photos)

8. Hold the cartridge with the label on top and slide it at a slight upward angle into the stall so the copper-colored contacts go in first. Push the cartridge until it snaps into place.

9. Push down on the print cartridge latch until it snaps closed.
10. Repeat steps 4 through 9 for each ink cartridge that you want to replace. You must install all three cartridges in order for the printer to work as intended.
11. Close the printer cover. If you installed a new print cartridge, the printer automatically prints a print cartridge alignment page, aligns the print head, and calibrates the printer.

12. Recycle or discard the page.

Align the cartridges
The first time you install a print cartridge in the printer, the printer performs a printer calibration automatically to align the cartridges. However, if colors in the photos you print are misaligned, or if the alignment page does not print correctly when you install a new print cartridge, use the following procedure to calibrate the printer manually.
This process aligns the print cartridges.
– Press Menu on the printer control panel.
– Select Calibrate the printer, then press ENTER/OK.

How to Replace an Empty Ink Cartridge in the HP Deskjet 5440 series Printer – an Illustrated Tutorial in 11 Steps

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. However, (original) HP XL cartridges for the HP Deskjet 5440 Printer are NOT available.

Three print cartridges can be used with the printer. For everyday printing: Use a black cartridge along with a tri-color cartridge. For printing quality color photos: Use a photo cartridge along with a tri-color cartridge. Always install the tri-color print cartridge in the left side of the print cartridge cradle. Install the black OR photo print cartridge in the right side of the print cartridge cradle.

1. Black print cartridge
2. Tri-color print cartridge
3. Photo print cartridge

You can check the ink levels by using the software installed with the HP Deskjet. To check the ink levels:
– Open the printer Toolbox.
– Click the Estimated Ink Levels tab.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts.

Which ink cartridges do I need for my HP Deskjet HP Deskjet 5440 Printer?

For your US HP Deskjet 5440 Printer you need an HP 92 Black AND an HP 93 Tri-color cartridge. There are also 2 Packs available, like the HP 92 Black and 93 Tri-color Original Ink Cartridges, 2 pack.
For printing quality color photos use an HP 99 Photo Original cartridge.

For your European or UK HP Deskjet 5440 Printer you need an HP 336 Black cartridge AND an HP 342 Tri-color cartridge.
For printing quality color photos use an HP 348 Photo cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the printer cover. The carriage moves to the right side of the printer. Wait until the carriage is idle and silent before proceeding.

4. Press down on the cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black OR photo cartridge.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the new cartridge by its sides. Hold the cartridge so that the copper strips are on the bottom and facing toward the printer. Slide the new print cartridge at a slight upward angle into the empty slot. Then gently push on the upper part of the print cartridge forward until it snaps into place. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.

8. Repeat step 4 to 7 to replace the other cartridge, if needed.

9.Close the printer cover. The printer automatically prints a calibration page.

Align print cartridges
10. After installing a print cartridge, align the print cartridges to ensure the best print quality.
– Open the printer Toolbox.
– Click Align the Print Cartridges.
– Click Align, and then follow the onscreen instructions.
The HP Deskjet prints a test page, aligns the print cartridges, and calibrates the printer.
11. Recycle or discard the page.

How to Replace an Empty Ink Cartridge in the HP Deskjet 2549 All-in-One series Printer – an Illustrated Tutorial in 15 Steps

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP Deskjet, however, you can use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 2549 Printer?

For your US HP Deskjet 2549 Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 2549 Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before proceeding.

4. Press down on the cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the cartridge is inserted in the correct slot. The tri-color cartridge goes in the slot on the left. The black cartridge goes in the slot on the right. Push the cartridge forward into its slot until it snaps into place.

8. Repeat step 4 through 7 to replace the other cartridge, if necessary.
9. Close the cartridge access door. Follow any prompts on the screen.

10. Wait about 30 seconds for the alignment page to automatically print. The printer prints an alignment page automatically only when a new cartridge has been installed.

Align the printer
11. Lift the scanner lid.
12. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

13. Close the scanner lid.
14. Press the Start Copy Black button on the front panel of the printer. The printer aligns the cartridges.
15. Remove the alignment page from the scanner glass, and then close the scanner lid. Discard or recycle the alignment page.

The alignment page did not print?
– In the printer software, click Print & Scan and then click Maintain Your Printer to access the printer toolbox. The printer toolbox appears.
– Click Align Ink Cartridges on the Device Services tab.
The printer prints an alignment sheet.
– Now go back to step 11.