Tutorial – Page 3 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the Canon PIXMA TS5320a All-in-One Wireless Inkjet Printer, Scanner, Copier – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Canon recommends that you use original Canon ink cartridges. If the cartridges are labeled as Canon FINE Cartridges, the cartridges have a mechanical printhead built into the cartridge, instead of being installed into the printer.

Check the estimated ink levels
You can check the estimated ink levels from the display on the printer operation panel and from the Canon printer software. The ink level detector is mounted on the printer to detect the remaining ink level. The printer considers as ink is full when a new cartridge is installed, and then starts to detect a remaining ink level. If you install a used cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a guide.

To check the estimated ink levels from the printer LCD display:
– Check that printer is turned on.
– Press the OK button. A symbol appears in the upper right corner (A), if there is any information about the remaining ink level.

– Select Estimated ink levels. A symbol is displayed on top of the cartridge (B) where there is a notification. The ink is running low. Prepare a new ink cartridge. The resulting print quality may not be satisfactory, if printing is continued under this condition. The image below shows estimated ink levels. Select Order ink now and press the QR button to display the QR code and access the ink purchasing site. You can check the model number of the cartridge by selecting Ink model number.

To check the ink levels from the printer software (Windows):

Open the printer driver setup window:
– Select the print command or printer icon from your application software. The Print command can generally be found in the File menu.
– Select your printer model, and click Preferences or Properties. The printer driver’s setup screen appears.

You can also display the printer driver’s setup screen by clicking the printer icon:
– Select Control Panel -> Hardware and Sound -> Devices and Printers.
– Right-click the icon of your model. When the menu appears, select Printing preferences.

Canon IJ Status Monitor
The Canon IJ Status Monitor displays the printer status and the printing progress. You can also use it to check the remaining ink level and the cartridge types for your model. The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer. The Canon IJ Status Monitor launches automatically when print data is sent to the printer. When launched, the Canon IJ Status Monitor appears as a button on the task bar. Click the button of the status monitor displayed on the task bar. The Canon IJ Status Monitor appears. To open the Canon IJ Status Monitor when the printer is not printing, open the printer driver setup window and click View Printer Status on the Maintenance tab.

Canon sells most of their cartridges in a standard yield size and a high yield or XL. For some printer models, extra-high yield, or XXL cartridges are available. All cartridge sizes are the exact same size and install in your printer the same way, the only difference is the amount of ink that is inside the cartridge. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least 2 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. A new Canon printer includes a complete set of starter ink cartridges. Starter cartridges are filled with less ink than a standard yield cartridge so you shouldn’t expect to get very many prints out of them before they need to be replaced.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Single cartridge
If an ink cartridge runs out of ink, you can print with either the color or black ink cartridge. However the print quality may be reduced compared to when printing with both cartridges. We recommend to use a new ink cartridge in order to obtain optimum qualities. Even when printing with one cartridge only, print with leaving the empty ink cartridge installed. If either the color ink cartridge or black ink cartridge isn’t installed, an error occurs and the printer can’t print.

Which ink cartridges do I need for my Canon PIXMA TS5320a Wireless All-in-One Printer?

For your US Canon PIXMA TS5320a Wireless All-in-One Printer you need a Canon PG-260 black cartridge AND a Canon CL-261 color cartridge OR the XL versions: Canon PG-260 XL black cartridge AND a Canon CL-261 XL color cartridge. There are also two-in-one valuepacks available like the PG-260/PG-261 Value Pack (also available in XL).

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the ON button to turn on the printer, if it is not already turned on. It may take a while for the printer to start working after you turn on the printer.

2. Load paper
Open the rear tray cover (A) gently. Pull straight up and fold back paper support (B).

3.
– Open the feed slot cover (C) and slide the right paper guide (D) to open both paper guides.
– Load paper stack in portrait orientation with print side facing up.
– Slide the right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
– Close the feed slot cover (C) gently.
– After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the LCD. If page size and media type on LCD match size and type of paper loaded in rear tray, select OK. If not, select Change to change the settings in accordance with the size and type of the loaded paper.

4. Pull out the paper output tray (H) and open the paper output support (I).

5. Replace the cartridges.
Open the scanning unit / cover, using one or both of the tabs at sides of the cover. The cartridge holder moves to the replacement position. Wait until the printer is idle and silent before continuing.

6. Remove the empty cartridge.
– Open the ink cartridge locking cover by pushing the front tab in, while lifting the cover up.
– Lift out the empty cartridge.

7. Prepare a new cartridge.
– Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.
– Remove the protective tape (G) gently.

Do NOT:
– Remove the copper electrical strip
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Install the new cartridge.
– Insert the new cartridge into the cartridge holder.
The tri-color cartridge goes in the slot on the left.
The black cartridge goes in the slot on the right.
– Close the ink cartridge locking cover to secure the ink cartridge. Push the ink cartridge locking cover fully until it clicks. The cartridge will be locked.

9. Repeat step 5 through 8 to replace the other cartridge, if necessary.
The tri-color cartridge goes in the slot on the left.
The black cartridge goes in the slot on the right.

10. Close the scanning unit / cover. Be sure to lift the cover first a little to unlock the hinge, then take it down gently.

Align the cartridges if necessary.
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, align the print head.

11.
– Press Maintenance on the LCD panel.
– Select Print Head Alignment – Auto. The confirmation screen will appear. Then, select Yes and press OK. The print head alignment sheet is printed, and the print head is aligned automatically. This may take 4 to 5 minutes. When the completion message appears, select OK.
– Discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP Deskjet F2110 All-in-One Printer – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the ink levels by using the HP Photosmart Software:
– In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox.
You can also open the Printer Toolbox from the Print Properties dialog box, click the Services tab, and then click Service this device.
– Click the Estimated Ink Level tab.
The estimated ink levels for the print cartridges appear.

The Check Print Cartridge light on the Control panel indicates the need to reinsert the print cartridge, replace the print cartridge because something is wrong, or close the print cartridge door.

You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts. During ink-backup mode, the product can only print jobs from the computer. You cannot initiate a print job from the control panel (such as copying or scanning an original).

Which ink cartridges do I need for my HP Deskjet F2110 All-in-One Printer?

For your US, European and UK HP Deskjet F2110 All-in-One Printer you need HP 21 Black AND HP 22 Tri-color cartridges OR HP 21XL Black AND HP 22XL Tri-color cartridges. There are also 2-Packs available, like the HP 21 Black and 22 Tri-color Original Ink Cartridges, 2 pack. Check the price of HP 21 and HP 22 cartridges at Amazon.com .

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the paper tray, if you have not already done so.

Remove the empty cartridge
3. Open the print cartridge door. The carriage moves to the center of the printer. If the carriage does not move to the center, turn off the printer, and then turn it on again. Wait until the carriage is idle and silent before proceeding.

4. Press down on the empty cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left (1) to replace the tri-color cartridge. Remove the cartridge from the slot on the right (2) to replace the black cartridge OR photo print cartridges.

If the black print cartridge is being removed in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector or an airtight plastic container.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the new cartridge by its sides, so that the copper strip is on the bottom and facing toward the printer. The HP label is on top.

8. Slide the print cartridge firmly into the cradle at a slight upward angle until you feel resistance. The push on the upper part of the print cartridge forward until it snaps into place. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.

9. Repeat step 4 trough 8 to replace the other cartridge, if needed.

10. Close the print cartridge door. The product prints an alignment page.

Align the new cartridge
Print cartridge alignment ensures better print quality.
– After the print cartridge alignment sheet prints, load it on the left front corner of the glass with the top of the page to the left.

– Press the Scan button. The HP All-in-One aligns the print cartridges. Recycle or discard the print cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP Deskjet 1255 Printer – an Illustrated Tutorial in 10 Steps

Check the price of the HP Deskjet 1255 at Amazon.com .

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

You can easily check the estimated ink levels from the the HP printer software.

To check the ink levels from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click the Estimated Levels tab.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least 2 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Deskjet 1255 Printer?

For your US HP DeskJet 1255 Printer you need HP 67 Black AND HP 67 Tri-color cartridges OR the XL versions: HP 67XL Black AND HP 67XL Tri-color cartridges. There are also combo packs available, like the Original HP 67 Black/Tri-color Ink Cartridges (2-pack). Check the price of HP 67 cartridges at Amazon.com .

For your European or UK HP DeskJet 1255 Printer you need HP 305 Black AND HP 305 Tri-color cartridges OR the XL versions: HP 305XL Black AND HP 305XL Tri-color cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.
hp deskjet 1255 printer replace the ink cartridges 01

hp deskjet 1255 printer replace the ink cartridges 02

2. Load unused plain white Letter or A4-sized paper into the input tray. Also, lower the output tray, if it is not already lowered.
hp deskjet 1255 printer replace the ink cartridges 03

Remove the empty cartridge
3. reach inside the printer, grasp the handle, and then lower the ink cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.
hp deskjet 1255 printer replace the ink cartridges 04

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.
hp deskjet 1255 printer replace the ink cartridges 05

Insert a new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.
hp deskjet 1255 printer replace the ink cartridges 06

hp deskjet 1255 printer replace the ink cartridges 07

6. Pull the colored tab to remove the plastic tape.
hp deskjet 1255 printer replace the ink cartridges 08

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.
hp deskjet 1255 printer replace the ink cartridges 09

8. Push the cartridge forward until it snaps into place.
hp deskjet 1255 printer replace the ink cartridges 10

9. Repeat step 4 through 8 to replace the other cartridge, if necessary.
The color ink cartridge is on the left.
The black ink cartridge is on the right.

10. Close the cartridge access door.
hp deskjet 1255 printer replace the ink cartridges 11

Align the cartridges

After loading the paper, the printer automatically prints an alignment page.

– Follow any onscreen instructions to complete the alignment.
– Recycle or discard the cartridge alignment sheet later.
hp deskjet 1255 printer replace the ink cartridges 12

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software.

To align the cartridges or printhead from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click Print > Maintain Your Printer to access the Printer Toolbox window.
– From the Device Services tab, click Align Ink Cartridges. The printer prints an alignment sheet.
– Follow any onscreen instructions to complete the alignment.
– Recycle or discard the cartridge alignment sheet later.

How to Replace an Empty Ink Cartridge in the HP ENVY 6452e All-in-One Printer – an Illustrated Tutorial in 9 Steps

You can check the estimated ink levels from the printer control panel, from the HP printer software, and from the HP Smart App.

To check the ink levels from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click Estimated Levels.

To check the ink levels from the HP Smart App:
Open the HP Smart App on your mobile device. The estimated ink levels for your printer appear at the top of the screen, beside the picture of the printer.

Use the single-cartridge mode to operate the HP ENVY 6452e All-in-One Printer with only one ink cartridge. The single-cartridge mode is initiated when there is only one cartridge installed in the carriage, or a cartridge is removed from the carriage if there are two cartridges installed previously.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Which ink cartridges do I need for my HP ENVY 6452e All-in-One Printer?

For your US HP ENVY 6452e All-in-One Printer you need HP 67 Black AND HP 67 Tri-color cartridges OR the XL versions: HP 67XL Black AND HP 67XL Tri-color cartridges. Check the price of HP 67 cartridges at Amazon.com .
For your European or UK HP ENVY 6452e All-in-One Printer you need HP 305 Black AND HP 305 Tri-color cartridges OR the XL versions: HP 305XL Black AND HP 305XL Tri-color cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. The power button is located at the left backside of the printer, next to the USB port. Wait until the product is idle and silent before continuing.
hp envy 6452e how to replace the ink cartridges 01

2. Load unused plain white Letter or A4-sized paper into the input tray, if you have not already done so.
hp envy 6452e how to replace the ink cartridges 02

Remove the old cartridge
3. Open the access door. To do this, Lift the ink cartridge access door by using the recessed areas on the sides of the printer until it locks into place. The carriage moves slightly to the left. Wait until the carriage is idle and silent before you proceed.
hp envy 6452e how to replace the ink cartridges 03

4. To release the ink cartridge, lift the lid on the ink cartridge slot, then gently push the lid back until it stops. Then, pull up on the ink cartridge to remove it from the slot.
– Remove the cartridge from the slot on the left to replace the tri-color cartridge.
– Remove the cartridge from the slot on the right to replace the black cartridge.
hp envy 6452e how to replace the ink cartridges 04

Insert a new cartridge
5. Remove the cartridge from packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.
hp envy 6452e how to replace the ink cartridges 05

hp envy 6452e how to replace the ink cartridges 06

6. Remove the plastic tape from the ink cartridge using the pull tab.
hp envy 6452e how to replace the ink cartridges 07

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then slide the ink cartridge forward into the slot until it snaps into place. Then close the latch until it clicks to secure the ink cartridge into place.
– The color ink cartridge is on the left.
– Theblack ink cartridge is on the right.
hp envy 6452e how to replace the ink cartridges 08

hp envy 6452e how to replace the ink cartridges 09

8. Repeat the previous steps to install the other ink cartridge, if needed.
The color ink cartridge is on the left.
The black ink cartridge is on the right.

9. Close the ink cartridge access door.
hp envy 6452e how to replace the ink cartridges 10

Align the new cartridges
– The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. The printer automatically prints an alignment page. Wait for the alignment page to fully eject from the printer.
– Lift the scanner lid.
– Place the alignment page on with the printed-side down on the left-back corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
hp envy 6452e how to replace the ink cartridges 11

– Close the scanner lid, press Black and White Copy button on the control panel. The scanner scans the alignment page and completes the alignment process.

– Wait until the Cancel button light turns off, indicating the alignment is complete.

– Discard or recycle the alignment page.

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the HP Smart App.