series – Page 13 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP DeskJet 3636 All-in-One series Printer – an Illustrated Tutorial in 18 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP DeskJet 3636 with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage.

Which ink cartridges do I need for my HP DeskJet 3636 All-in-One Printer?

For your US HP DeskJet 3636 All-in-One Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP DeskJet 3636 All-in-One Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.

2. Load plain white paper in the input tray.
3. Close the output tray extender, and then rotate the output tray clockwise to stow it in the printer

4. Open the front door of the printer.

5. Open the ink cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before you continue.

Remove the old cartridge
6. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert a new cartridge
7. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

8. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

9. Hold the ink cartridge by its sides with the nozzles toward the printer, then insert the ink cartridge into its correct slot. Push the ink cartridge forward into its slot until it snaps into place. Repeat these steps to install the other ink cartridge, if necessary. Insert the tri-color ink cartridge into the left slot. Insert the black ink cartridge into the right slot.

10. Close the ink cartridge access door.

11. Close the front door of the printer.

12. Pull out the output tray and the tray extender.

13. Follow any prompts on the computer screen.

Align the cartridges
14. Wait about 30 seconds for the alignment page to automatically print. The printer only prints an alignment page automatically when new ink cartridges are installed. Scanning the alignment page allows the printer to align the ink cartridges and provide the best print quality. If the alignment page fails to automatically print, you can manually print an alignment page using the HP Printer Assistant software (Windows) or the Printer Utility (Mac OS X).
15. Lift the scanner lid.
16. Place the alignment page with the print side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

17. Close the scanner lid.
18. Press the Start Copy Black button OR the Start Copy Color button on the printer control panel. The printer aligns the ink cartridges.

How to Replace an Empty Ink Cartridge in the HP Photosmart 8250 Printer – an Illustrated Tutorial in 11 Steps

You can check the estimated ink levels from the printer software or from the printer control panel. When no memory card is inserted, the printer screen displays six ink drop icons showing the approximate ink level for each cartridge. You can also press Select Photos ⏵ to see a larger, more accurate view of the ink levels.

From the software: Right-click the HP Digital Imaging Monitor icon in the Windows taskbar, and select Launch/Show HP Solution Center. Select Settings, then Print Settings, and then Printer Toolbox. Click the Estimated Ink Levels tab.

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

Hewlett-Packard Company cannot recommend the use of non-HP ink cartridges. Any damage caused by a non-HP print cartridge is not covered under the HP warranty and service agreements. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print almost double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Which ink cartridges do I need for my HP Photosmart 8250 Printer?

The HP Photosmart 8250 broke with HP’s tradition by offering a single ink system, with replaceable ink tanks for each of the six colours. The cartridges for the Photosmart 8250 don’t have built-in nozzles because the printer has a permanent print head. You must install all six cartridges. The printer will not work if an ink cartridge is
missing.

For your US HP Photosmart 8250 Printer you need an HP 02 Black Ink Cartridge AND 5 color cartridges: HP 02 Cyan, HP 02 Magenta, HP 02 Yellow, HP 02 Light Cyan and HP 02 Light Magenta. XL versions of these cartridges are also available, as well as 6 packs, like the HP 02 Black, Cyan, Magenta, Yellow, Light Cyan & Light Magenta Original Ink Cartridges with Photo Paper, 6 pack.

For your European or UK HP Photosmart 8250 Printer you need an HP 363 Black Ink Cartridge AND 5 color cartridges: HP 363 Cyan, HP 363 Magenta, HP 363 Yellow, HP 363 Light Cyan and HP 363 Light Magenta. XL versions of these cartridges are also available, as well as 6 packs, like the HP 363 Series Photo Value Pack.

If you have already used the printer several times and you have installed the HP Photosmart printer software, you can also find the cartridge numbers in the printer software.

1. Press the power button to turn on the printer, if it is not already on.

Remove the old cartridge
2. Open the printer top cover. Wait until the print cartridge is idle and silent before you continue.

3. Squeeze the gray tab below an ink cartridge slot to release the gray latch inside the printer, then lift the latch. The ink cartridge areas are color-coded for easy reference. Lift the latch bel owthe appropriate color to insert or replace a cartridge. From left to right, the ink cartridges are black, yellow, light cyan, cyan, light magenta, and magenta.

4. Now remove the old cartridge by pulling it toward you out of its slot.

Insert the new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. If there’s any small plastic tape (not the label) on the cartridges, remove it using the pull tab.

7. while holding the new cartridge by the handle, slide it into the empty slot. Make sure you insert the ink cartridge into the slot that has the same shaped icon and color as the new cartridge. The copper-colored contacts should be facing the printer as the ink cartridge is inserted.

8. Press down on the gray latch until it clicks into place.

9. Repeat step 5 to 8 to replace the other cartridge, if necessary.

10. Close the top cover.

11. Place the old ink cartridge in the box and refer to HP’s recycling instructions at http://www8.hp.com/us/en/hp-information/environment/product-recycling.html.

Aligning the printer
Use the following procedure when the self test report shows streaking or white lines through any of the blocks of color.

– Press Menu.
– Select Tools, then press OK.
– Select Align printer, then press OK. The printer aligns the print head, prints an alignment page, and calibrates the printer.
– Recycle or discard the alignment page.

How to Replace an Empty Ink Cartridge in the HP Photosmart 7450 Printer – an Illustrated Tutorial in 9 Steps

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable. Use the ink-backup mode to operate the HP Photosmart 7450 Printer with only one ink cartridge. The ink-backup mode is initiated when an ink cartridge is removed from the print cartridge cradle. Printing in ink-backup mode slows the printer and affects the quality of printouts. We do not recommend using a photo print cartridge for ink-backup mode.

Which ink cartridges do I need for my HP Photosmart 7450 Printer?

These print cartridges can be used with the printer:
l. black print cartridge
2. tri-color print cartridge
3. photo print cartridge

For your US, European and UK HP Photosmart 7450 Printer you need HP 56 Black AND HP 57 Tri-color cartridges. There are also 2-Packs available, like the HP 56 / 57 Black and Tri-Color Original Value Pack Combo. Check the price of HP 56 and HP 57 cartridges at Amazon.com .

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.

2. Load plain unused Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Open the printer top cover. Wait until the print cartridge is idle and silent before you continue.

4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black OR photo cartridge.

Insert the new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. Carefully remove the plastic tape using the pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the label on top and the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black OR photo cartridge goes in the slot on the right. Push the ink cartridge forward into its slot until it snaps into place.

8. Repeat step 4 to 7 to replace the other cartridge, if necessary.

9. Close the top cover.

Align cartridges
For optimal print quality and speed, align new print cartridges immediately after installing them:
– Right-click on the HP Photosmart printer icon in your Windows taskbar.
– Select Open HP Photosmart 7400 Toolbox.
– From the Device Services tab, click Align the Printer.
– Follow the onscreen instructions to complete the cartridge alignment.

How to Replace an Empty Ink Cartridge in the HP Photosmart C4780 All-in-One Printer – an Illustrated Tutorial in 13 Steps

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. Consider getting replacement print cartridges when you receive a low-ink warning message. This avoids possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

Use the ink-backup mode to operate the printer by using only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. During ink-backup mode, the printer can only print jobs from the computer. Printing in ink-backup mode slows the printer and affects the quality of printouts. When only a black print cartridge is installed, colors will print as grayscale. When only a tri-color print cartridge is installed, colors will print but black is grayed and is not a true black.

Which ink cartridges do I need for my HP Photosmart C4780 All-in-One printer?

For your US HP Photosmart C4780 All-in-One Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP Photosmart C4780 All-in-One Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load plain white paper in the input tray.

Remove the old cartridge
3. Open cartridge access door. Wait for print carriage to move to center of the product and wait until the product is idle and silent before continuing.

4. Press down on the top of the cartridge to release it, and then pull it toward you to remove it from its slot.

Insert the new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. Carefully remove the plastic tape using the pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its color-coded slot until it snaps into place. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge is on the left side of the carriage. The black cartridge is on the right side of the carriage.

8. Close cartridge door.

Align cartridges
9. When the product detects a new cartridge installed, it prompts you to align the cartridges. Touch OK on the product control panel. The product prints an alignment page.

10. Lift the scanner lid.

11. Place the alignment page on with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

12. Close the lid, and then touch OK. The product scans the alignment page and completes the alignment process.
13. Remove alignment page and recycle or discard it.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

– Open HP Solution Center.
– In HP Solution Center, click Settings.
– In the Print Settings area, click Printer Toolbox. The Toolbox opens in a new window.
– In the Toolbox, click the Device Services tab, and then click Align the Print Cartridges.
– A dialog box displays. In the dialog box, click Print Page. The product prints an alignment page.
– Got to step 10.