How to Replace an Empty Ink Cartridge in the HP Officejet 4632 e-All-in-One series Printer – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use Original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP Officejet, however, you can use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Officejet 4632 e-All-in-One series Printer?

For your US HP Officejet 4632 e-All-in-One series Printer you need
HP 61 or HP 61XL cartridges.
For your European or UK HP Officejet 4632 e-All-in-One series Printer you need HP 301 or HP 301XL cartridges.

Replace the cartridges

1. Before you replace the cartridges load plain white paper in the input tray.
2. Press the Power button to turn on the printer, if it is not already on.

Remove the old cartridge
3. Locate the slots on the left and right sides of the printer. Slide your fingers into the two slots, and then gently lift up to open the cartridge access door. The carriage moves to the right side of the printer. Wait until the carriage is idle and silent before continuing.
hp officejet 4632_01 hp officejet 4632_02

4. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops. Pull up on the cartridge to remove it from the slot.
– Lift the lid
– Gently push the lid back
– Pull up on the cartridge
hp officejet 4632_03

Insert a new cartridge
5. Remove the new cartridge from its packaging
hp officejet 4632_04

6. Remove the plastic tape using the pull tab. Be careful to touch only the black plastic on the cartridge.
hp officejet 4632_05

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the printer, and then slide the cartridge into the empty slot. Close the lid on the cartridge slot to secure the cartridge into place. Insert the color cartridge in the slot on the left. Insert the black cartridge in the slot on the right.
hp officejet 4632_06

8. Repeat the previous steps to install the other cartridge, if necessary.
9. Close the cartridge access door.
hp officejet 4632_07

Align the cartridges
10. Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges, and then prints an alignment page. Load the alignment page print-side down on the right front corner of the scanner glass, close the lid, and then press OK to complete the alignment.
hp officejet 4632_08

11. Recycle or discard the ink cartridge alignment sheet.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

To align the cartridges from the printer software
– In the printer software, click Print, Scan & Fax, and then click Maintain Your Printer to access the Printer Toolbox.
– The Printer Toolbox appears.
– Click Align Ink Cartridges on the Device Services tab. The printer prints an alignment sheet.

To align the cartridges from the printer display
– From the Home screen on the printer display, press the Up and Down buttons to select Tools, and then press OK.
NOTE: If you do not see the Home screen, press the Home button.
– From the Tools menu on the printer display, select Align Printer. Follow the on-screen instructions.

– Go to step 10.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3510 e-All-in-One series Printer – an Illustrated Tutorial in 16 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the product can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 3510 e-All-in-One series Printer?

For your US HP Deskjet 3510 e-All-in-One series Printer you need
HP 61 or HP 61XL cartridges.
For your European or UK HP Deskjet 3510 e-All-in-One series Printer you need HP 301 or HP 301XL cartridges.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.
2. Load plain white paper, if you have not already done so.

Remove the old cartridge
3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.
hp deskjet 3510_01

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.
hp deskjet 3510_02

Insert a new cartridge
5. Remove cartridge from packaging.
hp deskjet 3510_03

6. Remove the plastic tape using the pink pull tab.
hp deskjet 3510_04

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.
hp deskjet 3510_05 hp deskjet 3510_06

8. Push the cartridge forward until it snaps into place.
hp deskjet 3510_07

9. Repeat these steps to replace the other cartridge, if necessary.

10. Close the cartridge access door.
hp deskjet 3510_08

11. Follow any prompts on the screen.
12. Wait about 30 seconds for the alignment page to automatically print. If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display on the product.
hp deskjet 3510_09

Align the cartridges

Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

13. Lift the scanner lid.
14. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
hp deskjet 3510_10

15. Close the scanner lid.
16. On the printer control panel press OK to begin the scan. The printer automatically aligns the cartridges.

How to Replace an Empty Ink Cartridge in the HP Officejet 8040 e-All-in-One series Printer – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Use the single-cartridge mode to operate the HP Officejet 8040 series with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the
computer.

Which ink cartridges do I need for my HP Officejet 8040 e-All-in-One series Printer?

For your US, European and UK HP Officejet 8040 e-All-in-One series Printer you need HP 62 Black and HP 62 Tri-Color cartridges or HP 62XL Black and HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack.

Replace the cartridges

1. Before you replace the cartridges load plain white paper in the input tray.

2. Press the Power button to turn on the printer, if it is not already on.

3. Open the cartridge access door by placing two fingers under one or both of the small handles on the sides of the cartridge access door and then lifting it up. The Door Open screen displays on the printer control panel with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ A Change Ink option also displays on the bottom right corner of the touchscreen. Touch Change Ink to watch a video on the touchscreen about replacing the cartridges (optional).
hp officejet 8040_01

Remove the old cartridge
4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot, and then set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.
hp officejet 8040_02

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.
hp officejet 8040_03

6. Remove the plastic orange tape using the pull tab.
hp officejet 8040_04

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Reinsert the cartridge by sliding it at a slight upward angle into the empty slot, and then gently pushing up on the cartridge until it snaps into place. Repeat these steps to replace the other cartridge, if necessary. Reinsert the tri-color cartridge into the left slot. Reinsert the black cartridge into the right slot .
hp officejet 8040_05

8. Close the cartridge access door.
When the door is completely closed, the Door Open screen with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ disappears, and the printer returns to the Home screen.
hp officejet 8040_06

Align the cartridges
Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same ink cartridge, the HP Officejet 8040 e-All-in-One series Printer will NOT prompt you to align the ink cartridges. The HP All-in-One remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges. Follow the instructions on the printer display to align the cartridges. You can also align the cartridges from the printer software.

9. Touch OK after closing the cartridge access door.
10. Wait for the printer to calibrate and align the cartridges. After the alignment is complete, the printer prints an alignment page.
11. Touch OK, and then discard or recycle the alignment page.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:
– On the printer control panel, touch Setup.
– Touch Printer Maintenance , and then touch Align Printer.
– Follow the instructions on the control panel to complete the alignment process.

How to Replace an Empty Ink Cartridge in the HP Officejet 4635 e-All-in-One series Printer – an Illustrated Tutorial in 5 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP Officejet 4635 e-All-in-One Printer?

For your US HP Officejet 4635 e-All-in-One Printer you need
HP 61 or HP 61XL cartridges.
For your European or UK HP Officejet 4635 e-All-in-One Printer you need HP 301 or HP 301XL cartridges.

Replace the cartridges

1. Check that power is on.

2. Remove cartridge.
a. Open the cartridge access door and wait for the print carriage to move to the right side of the printer.
hp4630e_01
b. Lift up the cartridge tab and remove it from the slot.
hp4630e_02

3. Insert new cartridge.
a. Remove cartridge from packaging.
hp4630e_03
b. Remove plastic tape using pink pull tab.
hp4630e_04
! Do not touch the copper-colored electrical contacts or the ink nozzles !
do not touch contacts
c. Place new cartridge in slot at an angle under the opened tab, and then squeeze the tab closed as the cartridge slides into place.
hp4630e_05
d. Close the cartridge access door.
hp4630e_06

4. Load plain paper and print out the alignment page.

5. Load the alignment page print-side down on the right front corner of the scanner glass, close the lid and press OK to complete the alignment.
hp4630e_07