Align – Page 71 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP ENVY 5535 e-All-in-One Series Printer

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP ENVY 5535 e-All-in-One Series Printer?

For your US HP ENVY 5535 e-All-in-One Series Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP ENVY 5535 e-All-in-One Series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.

2. Remove the old cartridge.
a. Open the cartridge access door. To do this, locate the cutouts on the site of the printer. Use this cutouts to lift the cartridge access door and wait for the print carriage to move to the right side of the product.

b. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops.
c. Pull up on the cartridge to remove it from the slot.

3. Insert the new cartridge.
a. Remove cartridge from packaging.

b. Remove plastic tape using pink pull tab.

! Do not touch the copper-colored electrical contacts or the ink nozzles !

c. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the printer, and then slide the cartridge into the empty slot, and then squeeze the lid closed as the cartridge slides into place. The color cartridge is on the left, and the black cartridge is on the right.

d. Close access door.

4. Close the scanner lid.

5. Align the cartridges when prompted to do so.
Aligning the cartridges ensures the high-quality output. If you remove and reinstall the
same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges.

Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges and prints an alignment page.

How to Replace an Empty Ink Cartridge in the HP Photosmart 7525 series

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. However, HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system.

Which ink cartridges do I need for my HP Photosmart 7525 series printer?

For your US HP Photosmart 7525 series printer you need
HP 564 Black and HP 564 Cyan/Magenta/Yellow cartridges.
There are also Combo Packs (4 cartridges in one pack) available, like the HP 564XL Black 564 Color Ink Cartridges Combo Pack.
For your European or UK HP Photosmart 7525 series printer you need HP 364 cartridges.
There are also Combo Packs (4 cartridges in one pack) available, like the HP 364 Black, Cyan, Magenta, Yellow – Original Ink Cartridge Combo Content Pack – Standard Capacity.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on. If the product is off, press the Power button to turn on the product. Wait until the product is idle and silent before continuing.

2. Remove cartridge.
a. Open the cartridge access door.
Wait for the print carriage to move to the ink label part of the product.

b. Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.

3. Insert new cartridge.
a. Remove the plastic wrap from a new cartridge by pulling the orange tab.
! Do not touch the copper-colored electrical contacts and ink port !
Make sure that you remove the orange pull-tab and plastic wrap completely before you twist the orange cap in the next step. Otherwise, ink might leak from the cartridge. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to vent the cartridge.

b. Twist the cap counter-clockwise until it snaps off. A forceful twist may be required to remove the cap.

c. Match color icons. With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place. Do not lift the carriage latch handle to install the cartridges. Doing so can result in incorrectly seated cartridges and printing problems. The latch must remain down to install the cartridges correctly. Repeat the previous steps for each ink cartridge you are replacing.

d. Close the cartridge access door.

4. After you insert new cartridges, align the printer for best print quality. Follow the instructions on the printer display to align the cartridges. You can also align the cartridges from the printer software.

How to Replace an Empty Ink Cartridge in the HP Officejet 5740 e-All-in-One series

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP Officejet 5740 e-All-in-One Printer?

For your US, European and UK HP Officejet 5740 e-All-in-One Printer you need HP 62 Black AND HP 62 Tri-Color cartridges OR HP 62XL Black AND HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack. Check the price of HP 62 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already on.

2. Open the cartridge access door by placing two fingers under one or both of the small handles on the sides of the cartridge access door and then lifting it up. The Door Open screen displays on the printer control panel with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ A Change Ink option also displays on the bottom right corner of the touchscreen. You do not need to select this option at this time.

3. Remove the old cartridge.
Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot.

4. Insert a new cartridge.
a. Remove the cartridge from packaging.

b. Remove plastic tape using the pull tab.

! Do not touch the copper-colored electrical contacts or the ink nozzles !

c. Reinsert the cartridge by sliding it at a slight upward angle into the empty slot, and then gently pushing up on the cartridge until it snaps into place. Reinsert the tri-color cartridge into the left slot. Reinsert the black cartridge into the right slot.

4. Close the cartridge access door.
When the door is completely closed, the Door Open screen with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ disappears, and the printer returns to the Home screen.

5. Align the cartridges.
Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same ink cartridge, the HP Officejet 5740 e-All-in-One will NOT prompt you to align the ink cartridges. The HP All-in-One remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges. Follow the instructions on the printer display to align the cartridges. You can also align the cartridges from the printer software.

a. Touch OK after closing the cartridge access door.
b. Wait for the printer to calibrate and align the cartridges. After the alignment is complete, the printer prints an alignment page.
c. Touch OK, and then discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP Photosmart 6520 series

Which ink cartridges do I need for my HP Photosmart 6520 series printer?

For your US HP Photosmart 6520 series printer you need HP 564 Black AND HP 564 Cyan/Magenta/Yellow cartridges. There are also Combo Packs (4 cartridges in one pack) available, like the HP 564XL Black 564 Color Ink Cartridges Combo Pack. Check the price of HP 564 cartridges at Amazon.com .
For your European or UK HP Photosmart 6520 series printer you need HP 364 cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

To replace the cartridges
1. Check that power is on. If the product is off, press the Power button to turn on the product. Wait until the product is idle and silent before continuing.

2. Remove cartridge.
a. Open the cartridge access door.
Wait for the print carriage to move to the ink label part of the product.

b. Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.

b. Twist the cap counter-clockwise until it snaps off. A forceful twist may be required to remove the cap.

d. Close the cartridge access door.

4. If ink levels are adequate, but print quality is poor, try aligning the printer for best print quality. You can align printer either from the printer display or from the printer software.