Ink Cartridge Replacement Tutorials – Page 67

How to Replace an Empty Ink Cartridge in the HP ENVY 4502 e-All-in-One Series Printer – an Illustrated Tutorial in 9 Steps

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Use the single-cartridge mode to operate the HP ENVY 4502 series with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Install both the black and tri-color cartridges in the HP ENVY 4502 series to exit single-cartridge mode.

Which ink cartridges do I need for my HP ENVY 4502 e-All-in-One Series Printer?

For your US HP ENVY 4502 e-All-in-One Series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP ENVY 4502 e-All-in-One Series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.

2. Load paper.

Remove Cartridge
3. Open the cartridge access door. To do this, locate the cutouts on the site of the printer. Use this cutouts to lift the cartridge access door and wait for the print carriage to move to the right side of the printer. Wait until the carriage is idle and silent before you continue.

4. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops. Pull up on the cartridge to remove it from the slot.

Insert New Cartridge
5. Remove cartridge from packaging.

6. Remove plastic tape using pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Slide the new cartridge in the slot at an angle under the opened lid, and then squeeze the lid closed as the cartridge slides into place. The color cartridge is on the left, and the black cartridge is on the right.

8. Close the cartridge access door.

9. Align the cartridges when prompted to do so.
Aligning the cartridges ensures the high-quality output. If you remove and reinstall the same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges. Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges and prints an alignment page.

If the printer did not print an alignment page, follow these steps:
– On the printer Control Panel, press the Down Arrow to scroll to Tools, and then press OK.
– Press the Down Arrow to scroll to Align Printer, and then press OK. The printer prints an alignment page.

How to Replace an Empty Ink Cartridge in the HP Photosmart D110 series Printer – an Illustrated Tutorial in 13 Steps

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. Consider getting replacement print cartridges when you receive a low-ink warning message. This avoids possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

Use the ink-backup mode to operate the printer by using only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. During ink-backup mode, the printer can only print jobs from the computer.

Which ink cartridges do I need for my HP Photosmart D110 series printer?

For your US HP Photosmart D110 series Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP Photosmart D110 series Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Load plain white paper in the input tray.

2. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

Remove cartridge
3. Open cartridge access door. Wait for print carriage to move to center of the product.

4. Press down on the top of the cartridge to release it, and then pull it toward you to remove it from its slot.

Insert the new cartridge
5. Remove cartridge from packaging.
6. Carefully remove the plastic tape using the pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its color-coded slot until it snaps into place. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge is on the left side of the carriage. The black cartridge is on the right side of the carriage.

8. Close cartridge door.

Align cartridges
9. When the product detects a new cartridge installed, it prompts you to align the cartridges. Touch OK on the product control panel. The product prints an alignment page.

10. Lift the product lid.
11. Place the alignment page on with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

12. Close the lid, and then touch OK. The product scans the alignment page and completes the alignment process.
13. Discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP OfficeJet 3830 All-in-One series Printer – an Illustrated Tutorial in 14 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP OfficeJet 3830 All-in-One series Printer?

For your US HP OfficeJet 3830 All-in-One series Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP OfficeJet 3830 All-in-One series Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.
2. Check that the printer is loaded with plain, white paper.
3. Open the front door of the printer.

4. Open the cartridge access door and wait for the print carriage to move to the center of the printer. Wait until the carriage is idle and silent before you continue.

5. Press down to release the ink cartridge, and then remove it from the slot.

6. Remove the new ink cartridge from its packaging.

7. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the new ink cartridge into its slot. Push the ink cartridge forward into its slot until it snaps into place. Repeat these steps to replace the other ink cartridge, if necessary. Make sure the ink cartridge is inserted in the correct slot.

– The tri-color ink cartridge goes in the slot on the left.
– The black ink cartridge goes in the slot on the right.

9. Close the ink cartridge access door.

10. Close the front door of the printer.

11. Pull out the output tray, and then lift the output tray extender.

12. Press OK to align the ink cartridges. An alignment page prints. Scanning the alignment page allows the printer to align the ink cartridges and provide the best print quality.

13. Lift the scanner lid. Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.

14. Close the scanner lid and touch OK to scan the page and complete the ink cartridge alignment.

How to Replace an Empty Ink Cartridge in the HP ENVY 5540 All-in-One series Printer – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region (or have your old ones refilled). Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP ENVY 5540 All-in-One series Printer?

For your US, European and UK HP ENVY 5540 All-in-One series Printer you need HP 62 Black AND HP 62 Tri-Color cartridges OR HP 62XL Black AND HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack. Check the price of HP 62 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Before you install the ink cartridges, load the paper tray with plain white paper.
2. Check that power is on.
3. Open the ink cartridge access door by placing two fingers under one or both of the small handles on the sides of the ink cartridge access door, and then lift up. ‘The ink cartridge access door is open. Close the door to continue.’ displays on the printer control panel.

4. Lightly press down on the low or empty ink cartridge to release it. Pull it toward you out of its slot, and set it aside for recycling.

5. Remove the new ink cartridge from its package. Be careful to touch only the black plastic on the ink cartridge.

6. Remove the protective tape from the ink cartridge.

! Do not touch the copper-colored electrical contacts or the ink nozzles !

7. Slide the new ink cartridge into the empty slot, and then gently push up on the ink cartridge until it snaps into place. Repeat these steps to replace the other ink cartridge, if necessary.

8. Close the ink cartridge access door and Touch OK.

9. Wait for the printer to calibrate and align the ink cartridges. An alignment page prints.

If the alignment page does not print, print an alignment page through the printer control panel:
a. Make sure to load the input tray with plain, white paper.
b. On the printer control panel, swipe the display to the left, and then touch Setup. The Setup menu displays.
c. Touch Tools, and then touch Align Printer.
An alignment page prints.

10. Place the alignment page with the print side down on the scanner glass. Position it according to the engraved guides around the glass.

11. Close the scanner lid, and then touch OK. The printer aligns the ink cartridges.