Change – Page 3 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the Canon PIXMA TS5320a All-in-One Wireless Inkjet Printer, Scanner, Copier – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Canon recommends that you use original Canon ink cartridges. If the cartridges are labeled as Canon FINE Cartridges, the cartridges have a mechanical printhead built into the cartridge, instead of being installed into the printer.

Check the estimated ink levels
You can check the estimated ink levels from the display on the printer operation panel and from the Canon printer software. The ink level detector is mounted on the printer to detect the remaining ink level. The printer considers as ink is full when a new cartridge is installed, and then starts to detect a remaining ink level. If you install a used cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a guide.

To check the estimated ink levels from the printer LCD display:
– Check that printer is turned on.
– Press the OK button. A symbol appears in the upper right corner (A), if there is any information about the remaining ink level.

– Select Estimated ink levels. A symbol is displayed on top of the cartridge (B) where there is a notification. The ink is running low. Prepare a new ink cartridge. The resulting print quality may not be satisfactory, if printing is continued under this condition. The image below shows estimated ink levels. Select Order ink now and press the QR button to display the QR code and access the ink purchasing site. You can check the model number of the cartridge by selecting Ink model number.

To check the ink levels from the printer software (Windows):

Open the printer driver setup window:
– Select the print command or printer icon from your application software. The Print command can generally be found in the File menu.
– Select your printer model, and click Preferences or Properties. The printer driver’s setup screen appears.

You can also display the printer driver’s setup screen by clicking the printer icon:
– Select Control Panel -> Hardware and Sound -> Devices and Printers.
– Right-click the icon of your model. When the menu appears, select Printing preferences.

Canon IJ Status Monitor
The Canon IJ Status Monitor displays the printer status and the printing progress. You can also use it to check the remaining ink level and the cartridge types for your model. The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer. The Canon IJ Status Monitor launches automatically when print data is sent to the printer. When launched, the Canon IJ Status Monitor appears as a button on the task bar. Click the button of the status monitor displayed on the task bar. The Canon IJ Status Monitor appears. To open the Canon IJ Status Monitor when the printer is not printing, open the printer driver setup window and click View Printer Status on the Maintenance tab.

Canon sells most of their cartridges in a standard yield size and a high yield or XL. For some printer models, extra-high yield, or XXL cartridges are available. All cartridge sizes are the exact same size and install in your printer the same way, the only difference is the amount of ink that is inside the cartridge. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least 2 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. A new Canon printer includes a complete set of starter ink cartridges. Starter cartridges are filled with less ink than a standard yield cartridge so you shouldn’t expect to get very many prints out of them before they need to be replaced.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Single cartridge
If an ink cartridge runs out of ink, you can print with either the color or black ink cartridge. However the print quality may be reduced compared to when printing with both cartridges. We recommend to use a new ink cartridge in order to obtain optimum qualities. Even when printing with one cartridge only, print with leaving the empty ink cartridge installed. If either the color ink cartridge or black ink cartridge isn’t installed, an error occurs and the printer can’t print.

Which ink cartridges do I need for my Canon PIXMA TS5320a Wireless All-in-One Printer?

For your US Canon PIXMA TS5320a Wireless All-in-One Printer you need a Canon PG-260 black cartridge AND a Canon CL-261 color cartridge OR the XL versions: Canon PG-260 XL black cartridge AND a Canon CL-261 XL color cartridge. There are also two-in-one valuepacks available like the PG-260/PG-261 Value Pack (also available in XL).

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the ON button to turn on the printer, if it is not already turned on. It may take a while for the printer to start working after you turn on the printer.

2. Load paper
Open the rear tray cover (A) gently. Pull straight up and fold back paper support (B).

3.
– Open the feed slot cover (C) and slide the right paper guide (D) to open both paper guides.
– Load paper stack in portrait orientation with print side facing up.
– Slide the right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
– Close the feed slot cover (C) gently.
– After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the LCD. If page size and media type on LCD match size and type of paper loaded in rear tray, select OK. If not, select Change to change the settings in accordance with the size and type of the loaded paper.

4. Pull out the paper output tray (H) and open the paper output support (I).

5. Replace the cartridges.
Open the scanning unit / cover, using one or both of the tabs at sides of the cover. The cartridge holder moves to the replacement position. Wait until the printer is idle and silent before continuing.

6. Remove the empty cartridge.
– Open the ink cartridge locking cover by pushing the front tab in, while lifting the cover up.
– Lift out the empty cartridge.

7. Prepare a new cartridge.
– Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.
– Remove the protective tape (G) gently.

Do NOT:
– Remove the copper electrical strip
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Install the new cartridge.
– Insert the new cartridge into the cartridge holder.
The tri-color cartridge goes in the slot on the left.
The black cartridge goes in the slot on the right.
– Close the ink cartridge locking cover to secure the ink cartridge. Push the ink cartridge locking cover fully until it clicks. The cartridge will be locked.

9. Repeat step 5 through 8 to replace the other cartridge, if necessary.
The tri-color cartridge goes in the slot on the left.
The black cartridge goes in the slot on the right.

10. Close the scanning unit / cover. Be sure to lift the cover first a little to unlock the hinge, then take it down gently.

Align the cartridges if necessary.
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, align the print head.

11.
– Press Maintenance on the LCD panel.
– Select Print Head Alignment – Auto. The confirmation screen will appear. Then, select Yes and press OK. The print head alignment sheet is printed, and the print head is aligned automatically. This may take 4 to 5 minutes. When the completion message appears, select OK.
– Discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP ENVY Inspire 7955e All-in-One Printer – an Illustrated Tutorial in 11 Steps

Check the price of the HP ENVY Inspire 7955e at Amazon.com .

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print 3 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control panel, from the printer software or from the HP Smart app.
A. To check the estimated ink levels from the printer control panel:
– From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard
– Touch the Ink symbol to check the estimated ink levels.

B. To check the ink levels from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click Estimated Levels at the top of the window.

C. To check the ink levels from the HP Smart app:
Just view the estimated ink levels from the home screen.

Use the single-cartridge mode to operate the HP ENVY Inspire 7955e All-in-One printer with only one cartridge. The single-cartridge mode is initiated when an cartridge is removed from the cartridge carriage.

Which ink cartridges do I need for my HP ENVY Inspire 7955e All-in-One series Printer?

For your US HP ENVY Inspire 7955e All-in-One Printer you need HP 64 Black AND HP 64 Tri-color cartridges (OR the HP 64 XL versions). There are also combo packs available, like the HP 64 Black and Tri-Color Original Ink Cartridges, 2 Cartridges. Check the price of HP 64 cartridges at Amazon.com .
For your European or UK HP ENVY Inspire 7955e All-in-One Printer you need HP 303 Black AND HP 303 Tri-color cartridges (OR the HP 303 XL versions). There are also combo packs available, like the HP Z4B62EE 303 Photo Value Pack, Black and Tri-colour, Pack of 2.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused plain white Letter or A4-sized paper into the main paper tray.

Remove the empty cartridge
3. Open the front door as shown below.

4. Open the cartridge access door by placing a thumb or two fingers under the small handle on the front of the cartridge access door and then lifting it up. Wait until the print cartridge cradle is idle and silent before you continue.

5. Lightly press down on the cartridge to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling.
– Remove the cartridge from the slot on the left to replace the tri-color cartridge.
– Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
6. Remove the new cartridge from its package. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

7. Pull the colored tab to remove the protective tape from the cartridge.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot.
– Insert the tri-color cartridge into the left slot.
– Insert the black cartridge into the right slot.

9. Repeat steps 5 through 8 to replace the other cartridge, if necessary.

10. Close the cartridge access door. The printer starts an initialization process. It is normal for the printer to make noises during this process.

11. Close the front door.

Align the printhead only if necessary.
Clean the printhead if your printed output is streaked or has any incorrect or missing colors.

The printer automatically aligns the printhead during the initial setup. The printhead does not have to be realigned when cartridges are replaced. However, you might want to use this feature for print quality issues in printouts when the printer status page shows streaking or white lines through any of the blocks of color, or if you are having print quality issues with your printouts. Performing the cleaning and aligning procedures unnecessarily can waste ink and shorten the life of the cartridges.

From the printer control panel:
– Touch or swipe down the tab at the top of the screen to open the
Dashboard
– Touch Setup
– Touch Printer Maintenance
– Select the desired option
– Follow the onscreen instructions

How to Replace an Empty Ink Cartridge in the HP Deskjet F2110 All-in-One Printer – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the ink levels by using the HP Photosmart Software:
– In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox.
You can also open the Printer Toolbox from the Print Properties dialog box, click the Services tab, and then click Service this device.
– Click the Estimated Ink Level tab.
The estimated ink levels for the print cartridges appear.

The Check Print Cartridge light on the Control panel indicates the need to reinsert the print cartridge, replace the print cartridge because something is wrong, or close the print cartridge door.

You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts. During ink-backup mode, the product can only print jobs from the computer. You cannot initiate a print job from the control panel (such as copying or scanning an original).

Which ink cartridges do I need for my HP Deskjet F2110 All-in-One Printer?

For your US, European and UK HP Deskjet F2110 All-in-One Printer you need HP 21 Black AND HP 22 Tri-color cartridges OR HP 21XL Black AND HP 22XL Tri-color cartridges. There are also 2-Packs available, like the HP 21 Black and 22 Tri-color Original Ink Cartridges, 2 pack. Check the price of HP 21 and HP 22 cartridges at Amazon.com .

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the paper tray, if you have not already done so.

Remove the empty cartridge
3. Open the print cartridge door. The carriage moves to the center of the printer. If the carriage does not move to the center, turn off the printer, and then turn it on again. Wait until the carriage is idle and silent before proceeding.

4. Press down on the empty cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left (1) to replace the tri-color cartridge. Remove the cartridge from the slot on the right (2) to replace the black cartridge OR photo print cartridges.

If the black print cartridge is being removed in order to install the photo print cartridge, store the black print cartridge in the print cartridge protector or an airtight plastic container.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the new cartridge by its sides, so that the copper strip is on the bottom and facing toward the printer. The HP label is on top.

8. Slide the print cartridge firmly into the cradle at a slight upward angle until you feel resistance. The push on the upper part of the print cartridge forward until it snaps into place. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.

9. Repeat step 4 trough 8 to replace the other cartridge, if needed.

10. Close the print cartridge door. The product prints an alignment page.

Align the new cartridge
Print cartridge alignment ensures better print quality.
– After the print cartridge alignment sheet prints, load it on the left front corner of the glass with the top of the page to the left.

– Press the Scan button. The HP All-in-One aligns the print cartridges. Recycle or discard the print cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP ENVY Inspire 7958e All-in-One Printer – an Illustrated Tutorial in 11 Steps

You can check the estimated ink levels from the HP Smart app, from the printer software or from the printer control panel:
A. To check the estimated ink levels from the printer control panel.
– From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard
– Touch the Ink symbol to check the estimated ink levels.

B. To check the ink levels from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click Estimated Levels at the top of the window.
hp envy inspire 7958e how to replace the ink cartridges 02

Use the single-cartridge mode to operate the HP ENVY Inspire 7958e All-in-One printer with only one cartridge. The single-cartridge mode is initiated when an cartridge is removed from the cartridge carriage.

Which ink cartridges do I need for my HP ENVY Inspire 7958e All-in-One series Printer?

For your US HP ENVY Inspire 7958e All-in-One Printer you need HP 64 Black AND HP 64 Tri-color cartridges (OR the HP 64 XL versions). There are also combo packs available, like the HP 64 Black and Tri-Color Original Ink Cartridges, 2 Cartridges. Check the price of HP 64 cartridges at Amazon.com .
For your European or UK HP ENVY Inspire 7958e All-in-One Printer you need HP 303 Black AND HP 303 Tri-color cartridges (OR the HP 303 XL versions). There are also combo packs available, like the HP Z4B62EE 303 Photo Value Pack, Black and Tri-colour, Pack of 2.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.
hp envy inspire 7958e how to replace the ink cartridges 03

2. Load unused plain white Letter or A4-sized paper into the main paper tray.
hp envy inspire 7958e how to replace the ink cartridges 04

Remove the empty cartridge
3. Open the front door as shown below.
hp envy inspire 7958e how to replace the ink cartridges 05

hp envy inspire 7958e how to replace the ink cartridges 07

Insert the new cartridge
6. Remove the new cartridge from its package. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.
hp envy inspire 7958e how to replace the ink cartridges 09

hp envy inspire 7958e how to replace the ink cartridges 10

7. Pull the colored tab to remove the protective tape from the cartridge.
hp envy inspire 7958e how to replace the ink cartridges 11

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

hp envy inspire 7958e how to replace the ink cartridges 13

hp envy inspire 7958e how to replace the ink cartridges 14

9. Repeat steps 5 through 8 to replace the other cartridge, if necessary.

10. Close the cartridge access door. The printer starts an initialization process. It is normal for the printer to make noises during this process.
hp envy inspire 7958e how to replace the ink cartridges 15

11. Close the front door.
hp envy inspire 7958e how to replace the ink cartridges 16

Align the printhead only if necessary.
Clean the printhead if your printed output is streaked or has any incorrect or missing colors.