Align – Page 55 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Officejet Pro X451dn Series Printer – an Illustrated Tutorial in 9 Steps

You can check the estimated ink levels from the printer software or from the printer control panel:

Status menu > Ink Information > Estimated Levels: View a graphic representation of the ink cartridge levels for all the cartridges.
Status menu > Ink Information > Cartridge Info > Magenta Cyan Yellow Black: View a graphic representation of the ink cartridge level for each cartridge individually.

Also, Supply-related notifications are automatically communicated on the product control panel.

A Supply Low message appears when an ink cartridge is nearing the estimated end of its useful life and a replacement cartridge should be obtained for use when needed.
A Supply Very Low message appears when the ink cartridge is near its estimated end of useful life. Have a replacement ink cartridge on hand.
A Supply Out of Ink message appears when the ink cartridge is empty.
Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. Hewlett-Packard Company cannot recommend the use of non-HP ink cartridges, either new or remanufactured. Any damage caused by a non-HP print cartridge is not covered under the HP warranty and service agreements. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.
Which ink cartridges do I need for my HP Officejet Pro X451dn Printer?

For your US, European and UK HP Officejet Pro X476dw Printer you need HP 970 Black (XL) AND HP 971 Cyan/Magenta/Yellow (XL) cartridges. There are also Four Packs available, like the HP 970XL & 971XL Four Pack Black & Color Ink Cartridges (1 Black, 1 Cyan, 1 Magenta, 1 Yellow). Check the price of HP 970 and HP 971 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

The product uses four colors and has a different ink cartridge for each color: yellow (Y), cyan (C), magenta (M), and black (K). The ink cartridge can be installed and removed by using one hand.

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. Wait until the product is idle and silent before continuing.

Remove the empty cartridge
2. Open the ink cartridge door. Wait until the print carriage stops moving before proceeding.

3. Push the old ink cartridge inward to unlock it.

4. Grasp the edge of the old ink cartridge and then pull the cartridge straight out to remove it.

Insert the new cartridge
5. Remove the new ink cartridge from the packaging.

6. Do not touch the metal connector of the ink cartridge. Fingerprints on the connector can cause print-quality problems. Fingerprints may cause supply error messages. Dust may also cause supply error messages; do not leave ink cartridges outside the product for prolonged periods of time.

7. Insert the new ink cartridge into the product.

8. Close the ink cartridge door.

9. Place the old ink cartridge in the box and refer to HP’s recycling instructions at http://www.hp.com/recycle .

How to Replace an Empty Ink Cartridge in the HP Officejet 5745 e-All-in-One series – an Illustrated Tutorial in 9 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the product can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP Officejet 5745 e-All-in-One series Printer?

For your US, European and UK HP Officejet 5745 e-All-in-One Printer you need HP 62 Black AND HP 62 Tri-Color cartridges OR HP 62XL Black AND HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack. Check the price of HP 62 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already on.

2. Load plain white paper in the input tray.

3. Open the cartridge access door by placing two fingers under one or both of the small handles on the sides of the cartridge access door and then lifting it up. The Door Open screen displays on the printer control panel with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ A Change Ink option also displays on the bottom right corner of the touchscreen. You do not need to select this option at this time.

Remove the old cartridge
4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot.

Insert a new cartridge
5. Remove the cartridge from packaging.

6. Remove plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Reinsert the cartridge by sliding it at a slight upward angle into the empty slot, and then gently pushing up on the cartridge until it snaps into place. Reinsert the tri-color cartridge into the left slot. Reinsert the black cartridge into the right slot.

8. Close the cartridge access door.
When the door is completely closed, the Door Open screen with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ disappears, and the printer returns to the Home screen.

9. Align the cartridges.
Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same ink cartridge, the HP Officejet 5745 e-All-in-One will NOT prompt you to align the ink cartridges. The HP All-in-One remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges. Follow the instructions on the printer display to align the cartridges. You can also align the cartridges from the printer software.

a. Touch OK after closing the cartridge access door.
b. Wait for the printer to calibrate and align the cartridges. After the alignment is complete, the printer prints an alignment page.
c. Touch OK, and then discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP Officejet Pro 8720 All-in-One series Printer – an Illustrated Tutorial in 7 Steps

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer software or from the printer control panel. The icon below displays the estimated ink levels. From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch:
to check the estimated ink levels. Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low-ink alert, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until you are prompted to do so. HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. Never turn off the printer when ink cartridges are missing.

Which ink cartridges do I need for my HP Officejet Pro 8720 All-in-One series Printer?

For your US HP OfficeJet Pro 8720 All-in-One series Printer you need an
HP 952 Black Ink Cartridge AND 3 color cartridges: HP 952 Cyan, HP 952 Magenta and HP 952 Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the HP 952XL Black and 952 Tri-color (Cyan, Magenta, Yellow) Combo Pack. Check the price of HP 952 cartridges at Amazon.com .

For your European or UK HP OfficeJet Pro 8740 All-in-One series Printer you need an HP 953 Black Ink Cartridge AND and 3 color cartridges: HP 953 Cyan, HP 953 Magenta and HP 953 Yellow.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the power button, if it is not already turned on. Wait until the product is idle and silent before continuing.

Remove the empty cartridge
2. Lift up and push back the ink cartridge access door. The carriage moves to the center of the printer. Wait until the print carriage stops moving before proceeding.

3. Find the cartridge you want to replace. Push in on the front of the cartridge to release it, and then pull it toward you to remove it from its slot.

Insert the new cartridge
4. Remove the new ink cartridge from its packaging. Do NOT touch the electrical contacts and ink port.

Do NOT lift the latch handle on the print carriage to install the ink cartridges. Doing so could cause the printhead or ink cartridges to be incorrectly seated, which can cause errors or print quality problems. The latch must remain down in order to correctly install the ink cartridges.

5. Hold the new cartridge so that the cartridge contacts face the printer. Using the color-coded letters for help, slide the ink cartridge into the empty slot until until it clicks into place and it is securely installed in the slot. Make sure that you insert the ink cartridge into the slot that has the same colored letter as the color you are installing.

6. Repeat steps 3 through 5 for each ink cartridge you are replacing.

7. Close the print-carriage access door and wait until the warm-up sequence finishes and your printer is quiet before you proceed.

Align the printhead only if necessary.
Aligning the printhead ensures the high-quality output. The printhead does not have to be realigned when cartridges are replaced. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. You can align the printhead from the printer software and from the printer display.

How to Replace an Empty Ink Cartridge in the HP Officejet Pro 8710 All-in-One series Printer – an Illustrated Tutorial in 7 Steps

You can check the estimated ink levels from the printer software or from the printer control panel. The icon below displays the estimated ink levels. Ink level alerts and indicators provide estimates for planning purposes only. When you receive a low-ink alert, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until you are prompted to do so. HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. Never turn off the printer when ink cartridges are missing.

Which ink cartridges do I need for my HP Officejet Pro 8710 All-in-One series Printer?

For your US HP Officejet Pro 8710 All-in-One series Printer you need an HP 952 Black Ink Cartridge AND 3 color cartridges: HP 952 Cyan, HP 952 Magenta and HP 952 Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the HP 952XL Black and 952 Tri-color (Cyan, Magenta, Yellow) Combo Pack. Check the price of HP 952 cartridges at Amazon.com .

For your European or UK HP OfficeJet Pro 8715 All-in-One series Printer you need an HP 953 Black Ink Cartridge AND and 3 color cartridges: HP 953 Cyan, HP 953 Magenta and HP 953 Yellow. There are also Combo Packs (4 cartridges in one pack) available, like the Hewlett Packard HP Original 953 cartridges 4er Set black, cyan, magenta, yellow Combo Pack.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the power button, if it is not already turned on. Wait until the product is idle and silent before continuing.

Remove the empty cartridge
2. Slip your fingers into the slot on the left side of the printer, and then pull forward to open the cartridge access door. The carriage moves to the left side of the printer. Wait until the print carriage stops moving before proceeding.

3. Find the cartridge you want to replace. Push in on the front of the cartridge to release it, and then pull it toward you to remove it from its slot.

Insert the new cartridge
4. Remove the new ink cartridge from its packaging. Do NOT touch the electrical contacts and ink port.

6. Repeat steps 3 through 5 for each ink cartridge you are replacing.

7. Close the print-carriage access door and wait until the warm-up sequence finishes and your printer is quiet before you proceed.