Guide – Page 52 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP DeskJet 2130 All-in-One series Printer – an Illustrated Tutorial in 13 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP DeskJet 2130 with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage.

Which ink cartridges do I need for my HP DeskJet 2130 All-in-One series Printer?

For your US HP DeskJet 2130 All-in-One series Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP DeskJet 2130 All-in-One series Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.
Replace one or both ink cartridges indicated by the blinking Ink Alert light on the printer control panel.
1) Ink Alert light (tri-color)
2) Ink Alert light (black)

2. Load plain white paper in the input tray.
3. Lower the output tray, reach inside the printer, grasp the handle, and then lower the ink cartridge access door to open it. The carriage moves to the center of the printer. Wait until the printer is idle and silent before you continue.

Remove the old cartridge
4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then insert the ink cartridge into its correct slot. Slide the new ink cartridge at a slight upward angle into the empty slot, and then gently push the ink cartridge until it snaps into place. Repeat these steps to install the other ink cartridge, if necessary. Insert the tri-color ink cartridge into the left slot. Insert the black ink cartridge into the right slot.

8. Close the ink cartridge access door. The printer automatically prints an alignment page. The printer only prints an alignment page automatically when new ink cartridges are installed. To achieve the best print quality, it is necessary to align the ink cartridges.

Align the cartridges
9. Wait about 30 seconds for the alignment page to automatically print. Scanning the alignment page allows the printer to align the ink cartridges and provide the best print quality. If the alignment page fails to automatically print, you can manually print an alignment page using the HP Printer software.
10. Lift the scanner lid.
11. Place the alignment page with the print side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

12. Close the scanner lid.
13. Press the Start Copy Black button or the Start Copy Color button on the printer control panel. The printer aligns the ink cartridges.

How to Replace an Empty Ink Cartridge in the HP Officejet Pro 6835 All-in-One Inkjet Printer – an Illustrated Tutorial in 8 Steps

HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. Never turn off the printer when ink cartridges are missing.

Which ink cartridges do I need for my HP Officejet Pro 6835 All-in-One Inkjet Printer?

For your US, European and UK HP Officejet Pro 6835 All-in-One Inkjet Printer you need HP 934 Black (XL) AND HP 935 Cyan/Magenta/Yellow (XL) cartridges. There are also Combo Packs (4 cartridges in one pack) available, like the HP 934XL Black and 935 Tri-color (Cyan, Magenta, Yellow) Combo Pack. Check the price of HP 934 and HP 935 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already on.

Remove the old cartridge
2. Slip your fingers into the slot on the left side of the printer, and then gently lift to open the cartridge access door. The carriage moves to the left side of the printer. Wait several seconds until the carriage is idle and silent before you proceed.

3. Press the tab inward on the front of the old cartridge to release it, and then pull up on the cartridge to remove it from the slot.

Insert a new cartridge
4. Remove the new ink cartridge from its packaging.
5. Pull the orange tab on the wrapper straight back. Make sure that you remove the orange pull-tab completely otherwise, ink might leak from the cartridge. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to properly vent the cartridge.

5. Hold the cartridge by its sides, and then twist the protective orange cap counter-clockwise to snap it off the cartridge. Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.

6. Turn the cartridge so that the cartridge contacts face downward, and then match the label color with the color dot on the carriage. Slide the ink cartridge into the empty slot until it clicks securely into the slot and it is firmly seated. Make sure that you insert the ink cartridge into the slot that has the same colored letter as the color you are installing.

If the cartridge does not firmly seat, remove the cartridge from the printhead. Gently bend the tab away from the cartridge, and then reinsert the cartridge into the printhead.

7. Repeat steps 3 through 5 for each ink cartridge you are replacing.

8. Close the ink cartridge access door.

Align the printhead only if necessary.
The printer automatically aligns the printhead during the initial setup. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. Load Letter or A4 unused plain white paper into the input tray first. You can align the printhead from the printer’s control panel, from the HP printer software or embedded web server (EWS).

How to Replace an Empty Ink Cartridge in the HP Officejet 4632 e-All-in-One series Printer – an Illustrated Tutorial in 11 Steps

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP Officejet, however, you can use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Officejet 4632 e-All-in-One series Printer?

For your US HP Officejet 4632 e-All-in-One series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Officejet 4632 e-All-in-One series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Before you replace the cartridges load plain white paper in the input tray.
2. Press the Power button to turn on the printer, if it is not already on.

Remove the old cartridge
3. Locate the slots on the left and right sides of the printer. Slide your fingers into the two slots, and then gently lift up to open the cartridge access door. The carriage moves to the right side of the printer. Wait until the carriage is idle and silent before continuing.

4. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops. Pull up on the cartridge to remove it from the slot.
– Lift the lid
– Gently push the lid back
– Pull up on the cartridge

Insert a new cartridge
5. Remove the new cartridge from its packaging

6. Remove the plastic tape using the pull tab. Be careful to touch only the black plastic on the cartridge.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the printer, and then slide the cartridge into the empty slot. Close the lid on the cartridge slot to secure the cartridge into place. Insert the color cartridge in the slot on the left. Insert the black cartridge in the slot on the right.

8. Repeat the previous steps to install the other cartridge, if necessary.
9. Close the cartridge access door.

Align the cartridges
10. Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges, and then prints an alignment page. Load the alignment page print-side down on the right front corner of the scanner glass, close the lid, and then press OK to complete the alignment.

11. Recycle or discard the ink cartridge alignment sheet.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

To align the cartridges from the printer software
– In the printer software, click Print, Scan & Fax, and then click Maintain Your Printer to access the Printer Toolbox.
– The Printer Toolbox appears.
– Click Align Ink Cartridges on the Device Services tab. The printer prints an alignment sheet.

To align the cartridges from the printer display
– From the Home screen on the printer display, press the Up and Down buttons to select Tools, and then press OK.
NOTE: If you do not see the Home screen, press the Home button.
– From the Tools menu on the printer display, select Align Printer. Follow the on-screen instructions.

– Go to step 10.

How to Replace an Empty Ink Cartridge in the HP Officejet 4500 All-in-One series Printer – an Illustrated Tutorial in 13 Steps

When the ink level for an ink cartridge is low, a message appears on the display. You can also check the ink levels by using the printer Toolbox (Windows) or the HP Utility (Mac OS X).

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Which ink cartridges do I need for my HP Officejet 4500 All-in-One series Printer?

For your US, European and UK HP Officejet 4500 All-in-One series Printer you need an HP 901 Black Original Ink Cartridge (CC653AN) and an HP 901 Tri-color Original Ink Cartridge OR an HP 901XL CC654 Black High Yield Ink Cartridge. There are also Combo Packs (2 cartridges in one pack) available, like the HP 901XL Black and 901 Color Inkjet Cartridges. Check the price of HP 901 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Before you replace the cartridges load plain white paper in the input tray.

2. Press the Power button to turn on the printer, if it is not already on.

3. Open the front access door. The print carriage moves to the far right side of the product. Wait until the carriage is idle and silent before you continue.

Remove the old cartridge
4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot, and then set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. Gently remove the plastic tape using the pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Slide the cartridge forward into the empty slot. Slide the new ink cartridge at a slight upward angle into the empty slot, and then gently push the ink cartridge until it snaps into place.
If you are installing the tri-color ink cartridge, slide it into the left slot.
If you are installing a black ink cartridge, slide it into the right slot.

8. Repeat these steps to install the other ink cartridge, if necessary.

9. Close the front access door.

10. Press OK. The HP All-in-One prints an ink cartridge alignment sheet.

Align the cartridges
The HP All-in-One prompts you to align cartridges every time you install or replace an ink cartridge. You can also align the ink cartridges at any time from the device control panel or by using the software you installed with the device. Aligning the ink cartridges ensures high-quality output. If you remove and reinstall the same ink cartridge, the device will not prompt you to align the ink cartridges. It remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges.

11. Open the scanner lid, and then place the printed alignment page face down on the scanner glass in the front right corner with the top of the page to the right.

12. Close the scanner lid and then press OK. The HP All-in-One aligns the ink cartridges.

13. Recycle or discard the ink cartridge alignment sheet.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:
– Open HP Solution Center: Click Start, click All Programs, click HP, and then click HP Solution Center.
– In HP Solution Center, click Settings.
– In the Print Settings section, click Printer Toolbox. The printer Toolbox opens in a new window.
– Click the Device Services tab.
– Click Align the Print Cartridges.
– Click Print Page. The product prints an alignment page.
– Go to step 11.