Guide – Page 31 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet 3051A J611 series Printer – an Illustrated Tutorial in 15 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can easily check the ink supply level to determine how soon you might need to replace a cartridge. The ink supply level shows an estimate of the amount of ink remaining in the cartridges.

To check the ink levels from the control panel:
– From the Control Panel home screen, which displays Copy, Scan, and Quick Forms, press the Setup button.
– Select Ink Status.

To check the ink levels from the Printer Software.
– Click the HP All-in-One desktop icon to open the printer software, or open the software from the Start Menu.
– In the Printer Software, click Estimated Ink Levels.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP Deskjet, however, you can use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the printer can only print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 3051A J611 Printer?

For your US HP Deskjet 3051A J611 Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 3051A J611 Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load plain white paper, if you have not already done so.

Remove the empty cartridge
3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right. Push the cartridge forward until it snaps into place.

8. Repeat these steps to replace the other cartridge, if necessary.

9. Close the cartridge access door.

10. Press the button next to OK on the control panel display. The printer prints an alignment page.

Align the cartridges
Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

11. Lift the scanner lid.
12. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

13. Close the scanner lid.
14. Press the button next to OK on the control panel display. The product automatically aligns the cartridges.
15. When the Alignment successful message displays on the control panel screen, press the button next to OK on the control panel display to complete the alignment.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:
– In the HP Printer Software, click Printer Actions and then click Maintenence Tasks to access the Printer Toolbox. The Printer Toolbox appears.
– Click Align Ink Cartridges on the Device Services tab. The product prints an alignment sheet.
– Now go back to step 11.

How to Replace an Empty Ink Cartridge in the HP OfficeJet 4215 All-in-One Series Printer – an Illustrated Tutorial in 10 Steps

You can easily check the ink supply level to determine how soon you might need to replace a print cartridge. The ink level supply shows an approximation of the amount of ink remaining in the print cartridges. Checking the ink levels can only be done from the HP Director with the HP Officejet turned on and connected. When you first installed the HP Officejet software on your computer during setup, the HP Director was automatically installed on your computer.
– From the HP Director, choose Settings, choose Print Settings, and then choose Printer Toolbox.
– Click the Estimated Ink Levels tab.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable. Don’t leave a cartridge slot empty. You must install both print cartridges in order for your HP Officejet to work.

Which ink cartridges do I need for my HP OfficeJet 4215 All-in-One Printer?

These print cartridges can be used with the printer:
l. black print cartridge
2. tri-color print cartridge
3. photo print cartridge

For your US, European and UK HP OfficeJet 4215 All-in-One Printer you need HP 56 Black AND HP 57 Tri-color cartridges. There are also 2-Packs available, like the HP 56 / 57 Black and Tri-Color Original Value Pack Combo. Check the price of HP 56 and HP 57 cartridges at Amazon.com .

Note: You can also use the cheaper HP 27 Black AND HP 28 Tri-color cartridges for your HP Deskjet 5650, but you’ll have to replace them about twice as fast.

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.

2. Load unused plain Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Open the print-carriage access door. Wait until the print carriage moves into view and is idle and silent before you continue.

4. Press down on the empty cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black (OR photo) cartridge.

5. Place the old ink cartridge in an envelope and refer to HP’s recycling instructions at http://www.hp.com/recycle .

Insert a new cartridge
6. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

7. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Hold the ink cartridge by its sides with the nozzles toward the printer (HP label on top), then insert the ink cartridge into its correct slot. Slide the new ink cartridge at a slight upward angle into the empty slot, and then gently push the ink cartridge until it snaps into place. Repeat these steps to install the other ink cartridge, if necessary. Insert the tri-color ink cartridge into the left slot. Insert the black OR photo ink cartridge into the right slot.

9. Repeat steps 4 through 8 for the other cartridge if needed.

10. Close the printer cover. “Press OK to print Align page” appears on the display. Press OK.

Align the ink cartridges
– Remove the alignment page and load the top of the page face down in the document feeder tray between the paper width guides, and press OK.
– When “Alignment Complete” appears on the front panel display, the alignment is complete.
– Discard or recycle the alignment page.

The HP Officejet prompts you to align print cartridges every time you install or replace a print cartridge. You can also align the print cartridges at any time from the front panel or the HP Director. Aligning the print cartridges ensures highquality output. If you remove and reinstall the same print cartridge, the HP Officejet will not prompt you to align the print cartridges.

How to Replace an Empty Ink Cartridge in the HP Deskjet 450Ci Mobile Printer – an Illustrated Tutorial in 11 Steps

You can check the estimated ink levels from Toolbox. The Toolbox provides status and maintenance information about your printer. The Printer Status tab displays print cartridge and battery status. Click the Status Information button to display the part number and status information about the installed cartridges, including the estimated amount of remaining ink.

The printer LEDs indicate the printer status and are useful for diagnosing printing problems. The left print cartridge LED lights up in amber when the tri-color print cartridge is low on ink, and blinks when it needs to be replaced. The right print cartridge LED – Lights up in amber when the black or photo print cartridge is low on ink, and blinks when it needs to be replaced.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP Deskjet 450Ci Mobile Printer with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Printing with one print cartridge may be slower, and colors will differ from those when both print cartridges are installed. It is recommended to install both print cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. However, (original) HP XL cartridges for the HP Deskjet 450Ci Mobile Printer are NOT available.

Which ink cartridges do I need for my HP Deskjet 450Ci Mobile Printer?

For your US, European and UK HP Deskjet 450Ci Mobile Printer you need HP 56 Black AND HP 57 Tri-color cartridges. There are also 2-Packs available, like the HP 56 / 57 Black and Tri-Color Original Value Pack Combo. Check the price of HP 56 and HP 57 cartridges at Amazon.com .

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load Letter or A4 unused plain white paper in the input tray.

Remove the old cartridge
3. With the printer turned on, open the front access cover. Wait for the carriage to go to “print cartridge change” position. This should take only a few seconds.

4. Lift the print cartridge latch open and gently remove the print cartridge from its socket at the angle shown below. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge OR photo print cartridges.

Insert a new cartridge
5. Remove the cartridge from packaging. Be careful to only touch the black plastic on the ink cartridge.

6. Remove the plastic tape from the ink cartridge using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then insert the new print cartridge into its socket at the same angle at which you removed the old print cartridge. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.

8. Close the print cartridge latch. If the cartridge is inserted correctly, closing the latch gently pushes the cartridge into its socket. Press the latch to make sure it is seated flat on the cartridge.

9. Repeat steps 4 through 8 for the other cartridge if needed.

10. Close the front access cover. Wait for the carriage to complete the print cartridge initialization routine and return to the home position at the right side of the printer before using the printer.

Align the new cartridges
11. Whenever a print cartridge is replaced, the print cartridges should be aligned for the best possible print quality. If a printout is grainy, has stray dots, jagged edges, or the ink is bleeding into another color on the page, the print cartridges can be realigned through the Toolbox or the printer driver.

To align from the printer driver (Windows)
– Click Start > Settings > Printers.
– Right-click the printer icon, and then click Printing Preferences
– Click the Services tab, and click Align Print Cartridges.
– Click Align from the Align Print Cartridges dialog box. You are prompted to specify the combination of print cartridges you are using.
– Specify the combination of print cartridges you are using. An alignment page prints.
– Follow the instructions on the screen to select the best-aligned patterns from the alignment page.
– Click OK to close the Align Print Cartridges dialog box when the alignment procedure is complete.
– Discard or recycle the alignment page.

If you have the Toolbox installed, you can also align the print cartridges from the Printer Services tab in the Toolbox.
– Click the Align Print Cartridges button to align the left and right print cartridges.

How to Replace an Empty Ink Cartridge in the HP Deskjet 450CBi Mobile Printer – an Illustrated Tutorial in 11 Steps

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP Deskjet 450CBi Mobile Printer with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Printing with one print cartridge may be slower, and colors will differ from those when both print cartridges are installed. It is recommended to install both print cartridges.

Which ink cartridges do I need for my HP Deskjet 450CBi Mobile Printer?

For your US, European and UK HP Deskjet 450CBi Mobile Printer you need HP 56 Black AND HP 57 Tri-color cartridges. There are also 2-Packs available, like the HP 56 / 57 Black and Tri-Color Original Value Pack Combo. Check the price of HP 56 and HP 57 cartridges at Amazon.com .

Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and install an HP 58 Photo Ink Cartridge.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load Letter or A4 unused plain white paper in the input tray.

Remove the old cartridge
3. With the printer turned on, open the front access cover. Wait for the carriage to go to “print cartridge change” position. This should take only a few seconds.

Insert a new cartridge
5. Remove the cartridge from packaging. Be careful to only touch the black plastic on the ink cartridge.

6. Remove the plastic tape from the ink cartridge using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

9. Repeat steps 4 through 8 for the other cartridge if needed.