All-in-One series – Page 12 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet 2548 All-in-One series Printer – an Illustrated Tutorial in 15 Steps

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP Deskjet, however, you can use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 2548 Printer?

For your US HP Deskjet 2548 Printer you need
HP 61 OR HP 61XL cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 61 Black and Tri-color Original Ink Cartridges, 2 Cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 2548 Printer you need HP 301 or HP 301XL cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 301 Pack of 2 Cartridges – 1 Black Ink and 1 of Three Colors (Genuine Cyan, Magenta, Yellow).

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before proceeding.

4. Press down on the cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the cartridge is inserted in the correct slot. The tri-color cartridge goes in the slot on the left. The black cartridge goes in the slot on the right. Push the cartridge forward into its slot until it snaps into place.

8. Repeat step 4 through 7 to replace the other cartridge, if necessary.
9. Close the cartridge access door. Follow any prompts on the screen.

10. Wait about 30 seconds for the alignment page to automatically print. The printer prints an alignment page automatically only when a new cartridge has been installed.

Align the printer
11. Lift the scanner lid.
12. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

13. Close the scanner lid.
14. Press the Start Copy Black button on the front panel of the printer. The printer aligns the cartridges.
15. Remove the alignment page from the scanner glass, and then close the scanner lid. Discard or recycle the alignment page.

The alignment page did not print?
– In the printer software, click Print & Scan and then click Maintain Your Printer to access the printer toolbox. The printer toolbox appears.
– Click Align Ink Cartridges on the Device Services tab.
The printer prints an alignment sheet.
– Now go back to step 11.

How to Replace an Empty Ink Cartridge in the HP Deskjet F2210 All-in-One series Printer – an Illustrated Tutorial in 12 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the ink levels by using the HP Photosmart Software:
– In the HP Solution Center, click Settings, point to Print Settings, and then click Printer Toolbox. You can also open the Printer Toolbox from the Print Properties dialog box.
– Click the Estimated Ink Level tab.
The estimated ink levels for the print cartridges appear.

The Check Print Cartridge lights on the Control panel also inform you of the ink-status. The lights indicate the need to reinsert the specified print cartridge, replace the print cartridge, or close the print cartridge door. The Color light appears next to the three color drop icons and indicates that the problem is with the tri-color print cartridge. The Black/Photo light appears next to the single black drop icon and indicates that the problem is with the black or photo print cartridge.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts. During ink-backup mode, the product can only print jobs from the computer. You cannot initiate a print job from the control panel (such as copying or scanning an original).

Which ink cartridges do I need for my HP Deskjet F2210 All-in-One Printer?

For your US, European and UK HP Deskjet F2210 All-in-One Printer you need HP 21 Black AND HP 22 Tri-color cartridges OR HP 21XL Black AND HP 22XL Tri-color cartridges. There are also 2-Packs available, like the HP 21 Black and 22 Tri-color Original Ink Cartridges, 2 pack. Check the price of HP 21 and HP 22 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the print cartridge door. The carriage moves to the center of the printer. If the carriage does not move to the center, turn off the printer, and then turn it on again. Wait until the carriage is idle and silent before proceeding.

4. Press down on the empty cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left (1) to replace the tri-color cartridge. Remove the cartridge from the slot on the right (2) to replace the black cartridge OR photo print cartridges.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the new cartridge by its sides, so that the copper strip is on the bottom and facing toward the printer. The HP label is on top.

8. Slide the print cartridge firmly into the cradle at a slight upward angle until you feel resistance. The push on the upper part of the print cartridge forward until it snaps into place. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black Or photo print cartridge, slide it into the right slot.

When installing the cartridge and pressing it into the slot, do not rest your hand on top of the product for leverage. This might cause the carriage to lift out of position.

9. Repeat step 4 to 8 to replace the other cartridge, if needed.

10. Close the print cartridge door. The product prints an alignment page.

Align the new cartridge
Print cartridge alignment ensures better print quality.
11. After the print cartridge alignment sheet prints, load it on the left front corner of the glass with the top of the page to the left.

12. Press the Scan button. The product aligns the print cartridges. Wait until the green (On button) light stops blinking. Recycle or discard the print cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP Deskjet 2549 All-in-One series Printer – an Illustrated Tutorial in 15 Steps

Which ink cartridges do I need for my HP Deskjet 2549 Printer?

For your US HP Deskjet 2549 Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 2549 Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before proceeding.

Insert the new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

8. Repeat step 4 through 7 to replace the other cartridge, if necessary.
9. Close the cartridge access door. Follow any prompts on the screen.

10. Wait about 30 seconds for the alignment page to automatically print. The printer prints an alignment page automatically only when a new cartridge has been installed.

How to Replace an Empty Ink Cartridge in the HP OfficeJet Pro 6968 All-in-One series – an Illustrated Tutorial in 9 Steps

You can check the estimated ink levels from the printer control panel or from the printer software. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until prompted to do so.

To check the estimated ink levels from the printer control panel:
From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch the ink icon to check the estimated ink levels.

Which ink cartridges do I need for my HP OfficeJet Pro 6968 printer?

For your US HP OfficeJet Pro 6968 All-in-One printer you need 1 HP 902 Black OR HP 906XL cartridge AND 3 color cartridges: HP 902 Cyan/Magenta/Yellow cartridges. There are also Combo Packs (4 cartridges in one pack) available, like the HP 902XL/902 Black/Tri-color Ink Cartridges, Pack Of 4 Black/Cyan/Magenta/Yellow. Check the price of HP 902 cartridges at Amazon.com .

For your European or UK HP OfficeJet Pro 6968 All-in-One printer you need 1 HP 903 Black OR HP 907XL AND 3 color cartridges: HP 903 Cyan + HP 903 Magenta + HP 903 Yellow cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges.

1. Check that power is on. If the product is off, press the Power button to turn on the product. Wait until the product is idle and silent before continuing.

Remove the old cartridge
2. Open the cartridge access door.
Locate the two slots on the sides of the printer. Place your fingers in the slots, and then lift to open the ink cartridge access door. Wait until the carriage is idle and silent before you proceed.

3. Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.

Insert the new cartridge
4. Remove the new ink cartridge from its packaging by pulling the orange pull-tab straight back to remove the plastic wrap from the ink cartridge. Make sure you remove the orange pull-tab completely. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to vent the cartridge. Do not touch the copper-colored electrical contacts and ink port.

5. Remove the orange cap from the cartridge. Twist the cap counter-clockwise until it snaps off. A forceful twist may be required to remove the cap.

6. Gently bend the tab away from the ink cartridge.

7. Hold the ink cartridge so that the ink cartridge contacts are facing down and toward the printer. Match the colored dot on the ink cartridge with the dot of the same color on the carriage. Slide the new ink cartridge into its slot, and then gently press the ink cartridge down until it clicks into place and is seated firmly in the slot. Make sure that the color-coded letter on the cartridge matches that on the slot.

8. Repeat step 3 to 7 for each ink cartridge you are replacing.

9. Close the cartridge access door.

Align the printhead only if necessary.
The printer automatically aligns the printhead during the initial setup. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. You can align the printhead from the printer control panel, from the HP printer software and from the embedded web server (EWS).