dotch – Page 3 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the Canon PIXMA TS5320a All-in-One Wireless Inkjet Printer, Scanner, Copier – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Canon recommends that you use original Canon ink cartridges. If the cartridges are labeled as Canon FINE Cartridges, the cartridges have a mechanical printhead built into the cartridge, instead of being installed into the printer.

Check the estimated ink levels
You can check the estimated ink levels from the display on the printer operation panel and from the Canon printer software. The ink level detector is mounted on the printer to detect the remaining ink level. The printer considers as ink is full when a new cartridge is installed, and then starts to detect a remaining ink level. If you install a used cartridge, the indicated ink level of it may not be correct. In such case, refer to the ink level information only as a guide.

To check the estimated ink levels from the printer LCD display:
– Check that printer is turned on.
– Press the OK button. A symbol appears in the upper right corner (A), if there is any information about the remaining ink level.

– Select Estimated ink levels. A symbol is displayed on top of the cartridge (B) where there is a notification. The ink is running low. Prepare a new ink cartridge. The resulting print quality may not be satisfactory, if printing is continued under this condition. The image below shows estimated ink levels. Select Order ink now and press the QR button to display the QR code and access the ink purchasing site. You can check the model number of the cartridge by selecting Ink model number.

To check the ink levels from the printer software (Windows):

Open the printer driver setup window:
– Select the print command or printer icon from your application software. The Print command can generally be found in the File menu.
– Select your printer model, and click Preferences or Properties. The printer driver’s setup screen appears.

You can also display the printer driver’s setup screen by clicking the printer icon:
– Select Control Panel -> Hardware and Sound -> Devices and Printers.
– Right-click the icon of your model. When the menu appears, select Printing preferences.

Canon IJ Status Monitor
The Canon IJ Status Monitor displays the printer status and the printing progress. You can also use it to check the remaining ink level and the cartridge types for your model. The information displayed on the Canon IJ Status Monitor may differ depending on the country or region where you are using your printer. The Canon IJ Status Monitor launches automatically when print data is sent to the printer. When launched, the Canon IJ Status Monitor appears as a button on the task bar. Click the button of the status monitor displayed on the task bar. The Canon IJ Status Monitor appears. To open the Canon IJ Status Monitor when the printer is not printing, open the printer driver setup window and click View Printer Status on the Maintenance tab.

Canon sells most of their cartridges in a standard yield size and a high yield or XL. For some printer models, extra-high yield, or XXL cartridges are available. All cartridge sizes are the exact same size and install in your printer the same way, the only difference is the amount of ink that is inside the cartridge. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least 2 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. A new Canon printer includes a complete set of starter ink cartridges. Starter cartridges are filled with less ink than a standard yield cartridge so you shouldn’t expect to get very many prints out of them before they need to be replaced.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Single cartridge
If an ink cartridge runs out of ink, you can print with either the color or black ink cartridge. However the print quality may be reduced compared to when printing with both cartridges. We recommend to use a new ink cartridge in order to obtain optimum qualities. Even when printing with one cartridge only, print with leaving the empty ink cartridge installed. If either the color ink cartridge or black ink cartridge isn’t installed, an error occurs and the printer can’t print.

Which ink cartridges do I need for my Canon PIXMA TS5320a Wireless All-in-One Printer?

For your US Canon PIXMA TS5320a Wireless All-in-One Printer you need a Canon PG-260 black cartridge AND a Canon CL-261 color cartridge OR the XL versions: Canon PG-260 XL black cartridge AND a Canon CL-261 XL color cartridge. There are also two-in-one valuepacks available like the PG-260/PG-261 Value Pack (also available in XL).

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the ON button to turn on the printer, if it is not already turned on. It may take a while for the printer to start working after you turn on the printer.

2. Load paper
Open the rear tray cover (A) gently. Pull straight up and fold back paper support (B).

3.
– Open the feed slot cover (C) and slide the right paper guide (D) to open both paper guides.
– Load paper stack in portrait orientation with print side facing up.
– Slide the right paper guide (D) to align with both sides of paper stack. Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
– Close the feed slot cover (C) gently.
– After closing the feed slot cover, the paper setting confirmation screen for the rear tray appears on the LCD. If page size and media type on LCD match size and type of paper loaded in rear tray, select OK. If not, select Change to change the settings in accordance with the size and type of the loaded paper.

4. Pull out the paper output tray (H) and open the paper output support (I).

5. Replace the cartridges.
Open the scanning unit / cover, using one or both of the tabs at sides of the cover. The cartridge holder moves to the replacement position. Wait until the printer is idle and silent before continuing.

6. Remove the empty cartridge.
– Open the ink cartridge locking cover by pushing the front tab in, while lifting the cover up.
– Lift out the empty cartridge.

7. Prepare a new cartridge.
– Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.
– Remove the protective tape (G) gently.

Do NOT:
– Remove the copper electrical strip
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Install the new cartridge.
– Insert the new cartridge into the cartridge holder.
The tri-color cartridge goes in the slot on the left.
The black cartridge goes in the slot on the right.
– Close the ink cartridge locking cover to secure the ink cartridge. Push the ink cartridge locking cover fully until it clicks. The cartridge will be locked.

9. Repeat step 5 through 8 to replace the other cartridge, if necessary.
The tri-color cartridge goes in the slot on the left.
The black cartridge goes in the slot on the right.

10. Close the scanning unit / cover. Be sure to lift the cover first a little to unlock the hinge, then take it down gently.

Align the cartridges if necessary.
If printed ruled lines are misaligned or print results are otherwise unsatisfactory, align the print head.

11.
– Press Maintenance on the LCD panel.
– Select Print Head Alignment – Auto. The confirmation screen will appear. Then, select Yes and press OK. The print head alignment sheet is printed, and the print head is aligned automatically. This may take 4 to 5 minutes. When the completion message appears, select OK.
– Discard or recycle the alignment page.

Hoe vervang ik de koplamp van een Popal Daily Dutch Basic Fiets?

Goed werkende verlichting op fietsen is van levensbelang. Het is dan ook erg belangrijk om een defecte- of ontbrekende voor- of achterlicht snel te vernieuwen. Dit artikel gaat over het vervangen van de koplamp van een Popal Daily Dutch Basic matzwarte 28" damesfiets of omafiets. Deze is gemonteerd op een metalen lampensteun op de voordrager. Hetzelfde type koplamp wordt ook vaak voor andere (Popal) fietsen gebruikt. Je kunt deze handleiding daarom vaak ook voor andere (Popal) fietsen gebruiken. Het monteren op een andere lamphaak werkt in principe hetzelfde. Het vervangen van de koplamp is niet moeilijk, er is wel wat basisgereedschap voor nodig. Het is niet nodig om de fiets op te takelen of op zijn kop te zetten.

Voor je begint
De huidige generatie nieuwe Popal fietsen wordt meestal geleverd met een chroomkleurige plastic LED-koplamp. Dit is een prima koplamp. Hij bevat maar liefs 4 AAA batterijen en geeft goed licht. De plastic lamp heeft wel een nadeel: omdat de koplamp en het steuntje van plastic zijn, kan hij bij enige impact soms afbreken, zoals ook met de lamp van de fiets uit deze handleiding is gebeurd.

Wij hebben de plastic koplamp daarom vervangen voor een originele zwarte metalen Popal koplamp. Deze zijn op het moment van schrijven nog volop in de handel. Deze nieuwe metalen koplamp wordt geleverd met de benodigde 3 AAA batterijen. Let er wel op, dat er bij de nieuwe koplamp geen nieuwe bout, moer en tandveerringetje bij wordt geleverd. Je zult dus de bestaande bout, moer- en ringetje moeten gebruiken. Mochten deze ontbreken, dan kun je willekeurige andere gebruiken, als de maat ongeveer hetzelfde is.

Benodigdheden

Nieuwe Popal koplamp
Steeksleutel no. 8
Grote platte schroevendraaier

Eventueel nog nodig

Waterpomptang of andere tang
Nieuwe bout, moer- en tandveerringetje

Verwijderen van de defecte of gebroken lamp
1. Gebruik de steeksleutel no. 8 om de moer, van de defecte of ontbrekende gebroken koplamp helemaal los te draaien. Draai de sleutel hiervoor tegen de klok in. Als de hele bout meedraait, zonder dat de moer los komt, grijp de bout dan stevig vast met een waterpomptang of ander tangetje en gebruik wat kracht om de moer los te draaien.

2. Als de moer los is, verwijder dan de lamp en de bout- en ring van defecte lamp. Leg ze apart en zorg dat ze niet kwijtraken; ze worden hergebruikt voor de montage van de nieuwe lamp. Verwijder zonodig ook eventuele restanten plastic van de oude afgebroken plastic lampsteun en gooi deze weg.

Batterijen plaatsen
3. Gebruik een grote schroevendraaier om de grote schroef aan de onderzijde van de koplamp los te draaien door de schroevendraaier naar links – tegen de klok in – te draaien. Het is niet perse nodig om de schroef en ring helemaal lost te draaien en te verwijderen. Hij mag ook losgedraaid achterblijven. Je kunt nu de verchroomde voorzijde van de koplamp makkelijk verwijderen door er aan te trekken.

4. In de koplamp bevindt zich een plastic batterijhouder met metalen veertjes. Plaats de 3 meegeleverde kleine AAA batterijen in de batterijhouder. Let er op, dat de platte minzijde van de batterijen en de uitstekende pluszijde van de batterijen correct geplaatst worden conform het tekeningetje in de houder.

5. Schuif de verchroomde voorzijde van de lamp weer op de zwarte achterzijde. Dit moet heel makkelijk gaan. Zorg er voor dat het schroefgat in het metalen plaatje van de voorzijde precies geplaatst wordt onder de uitsparing voor de schroef in de zwarte achterzijde.

6. Plaats de schroef met het ringetje weer terug in het schroefgat (als je deze helemaal verwijderd had) en draai de schroef handvast aan door de schroevendraaier naar rechts – met de klok mee – te draaien.

7. Test of de nieuwe lamp werkt, door de rubber knop aan de bovenzijde van de koplamp in te drukken.

Monteren van nieuwe lamp
8. Plaats de nieuwe lamp door de lampsteun van de koplamp eerst tegen de linkerzijde (van voren gezien) van de lampsteun van de voordrager te houden. Duw de bout met de tandveerring door de 2 gaten. Plaats nu de moer terug op de bout en draai deze aan door deze naar rechts – met de klok mee – te draaien. Draai de moer nog niet helemaal strak vast; de lamp moet nog wat kunnen bewegen om hem naar boven in de juiste positie te kunnen plaatsen.

9. Plaats de koplamp in de juiste horizontale positie, door de half vastgedraaide lamp naar boven te bewegen. Let er op dat er tussen de stang van de voordrager van de fiets en de lamp genoeg ruimte overblijft om de ronde rubber knop aan de bovenzijde van de lamp in te kunnen drukken. Als de lamp definitief in de juiste positie staat, draai dan de moer stevig aan.

10. Test of de nieuwe lamp werkt, door de rubber knop aan de bovenzijde van de koplamp in te drukken. Test ook of de nieuwe koplamp naar behoren werkt als er aan de fiets geschud wordt en je het voorwiel laat stuiteren.

Dat is alles! Je Popal fiets is weer klaar voor veilig gebruik.

How to Replace the Battery of a Digital Refrigerator Thermometer – an Illustrated Tutorial in 8 Steps

When you have placed a digital thermometer inside your refrigerator to monitor the temperature, you might notice that after many months of use, the LCD screen stops working. Fortunately, fixing this is usually easy, as this is often due to an empty battery. You just have to replace the empty battery and this does not require special skills. The only things you need is a small precision screwdriver and a new coin cell battery. Just follow the steps below.

The thermometer we used for this manual is available on Amazon under the brand names AOUCE and Unigear.

Necessities

Replacing the battery

1. localize the 4 little Philips screws at the edges of the backside of the device.

2. Remove the 4 screws one by one by turning the screwdriver counterclockwise. Set the little screws apart and make sure you won’t loose them by putting them in an egg cup or something.

3. Gently remove the backside of the device by lifting it in an upward direction.

4. Use your finger nail to push the little metal tab at the right side of the battery compartment a little to the right. By doing this, the coin cell battery unlocks and can be removed from the battery compartment, using an other finger.

5. Take a new CR2032 battery from it’s packaging. The + plus side is on top. Now push the coin cell battery gently in the empty battery compartment until it clicks into place.

6. Replace the back cover of the device.
! Important: do this gently and make sure the little sensor on the circuit board exactly fits into the metal sensor-cover on the outside of the back cover. If you don’t do this gently and precisely, the sensor might bend or break.

7. Replace the 4 screws one by one into the back by turning the screwdriver clockwise.

8. Now the LCD display should start to work again. This might take a while. If necessary, push the power button.

Your digital refrigerator thermometer is ready for use again!

How to Replace an Empty Ink Cartridge in the HP ENVY Inspire 7955e All-in-One Printer – an Illustrated Tutorial in 11 Steps

Check the price of the HP ENVY Inspire 7955e at Amazon.com .

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print 3 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control panel, from the printer software or from the HP Smart app.
A. To check the estimated ink levels from the printer control panel:
– From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard
– Touch the Ink symbol to check the estimated ink levels.

B. To check the ink levels from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click Estimated Levels at the top of the window.

C. To check the ink levels from the HP Smart app:
Just view the estimated ink levels from the home screen.

Use the single-cartridge mode to operate the HP ENVY Inspire 7955e All-in-One printer with only one cartridge. The single-cartridge mode is initiated when an cartridge is removed from the cartridge carriage.

Which ink cartridges do I need for my HP ENVY Inspire 7955e All-in-One series Printer?

For your US HP ENVY Inspire 7955e All-in-One Printer you need HP 64 Black AND HP 64 Tri-color cartridges (OR the HP 64 XL versions). There are also combo packs available, like the HP 64 Black and Tri-Color Original Ink Cartridges, 2 Cartridges. Check the price of HP 64 cartridges at Amazon.com .
For your European or UK HP ENVY Inspire 7955e All-in-One Printer you need HP 303 Black AND HP 303 Tri-color cartridges (OR the HP 303 XL versions). There are also combo packs available, like the HP Z4B62EE 303 Photo Value Pack, Black and Tri-colour, Pack of 2.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused plain white Letter or A4-sized paper into the main paper tray.

Remove the empty cartridge
3. Open the front door as shown below.

4. Open the cartridge access door by placing a thumb or two fingers under the small handle on the front of the cartridge access door and then lifting it up. Wait until the print cartridge cradle is idle and silent before you continue.

5. Lightly press down on the cartridge to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling.
– Remove the cartridge from the slot on the left to replace the tri-color cartridge.
– Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
6. Remove the new cartridge from its package. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

7. Pull the colored tab to remove the protective tape from the cartridge.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot.
– Insert the tri-color cartridge into the left slot.
– Insert the black cartridge into the right slot.

9. Repeat steps 5 through 8 to replace the other cartridge, if necessary.

10. Close the cartridge access door. The printer starts an initialization process. It is normal for the printer to make noises during this process.

11. Close the front door.

Align the printhead only if necessary.
Clean the printhead if your printed output is streaked or has any incorrect or missing colors.

The printer automatically aligns the printhead during the initial setup. The printhead does not have to be realigned when cartridges are replaced. However, you might want to use this feature for print quality issues in printouts when the printer status page shows streaking or white lines through any of the blocks of color, or if you are having print quality issues with your printouts. Performing the cleaning and aligning procedures unnecessarily can waste ink and shorten the life of the cartridges.

From the printer control panel:
– Touch or swipe down the tab at the top of the screen to open the
Dashboard
– Touch Setup
– Touch Printer Maintenance
– Select the desired option
– Follow the onscreen instructions