February 2016 – Page 3 – Replacethatpart.com

Which Memory Card do I need for my ALCATEL ONETOUCH PIXI 3(4) Smartphone?

Make sure you purchase the right Memory Card for your smartphone. The base model of the OneTouch Pixi 3 4.0 has 4 GB of internal storage, which makes it a poor choice for storing multimedia. Users who demand more memory from their smartphone can install an external microSD or microSDHC (High-Capacity) memory card with a maximum capacity of 32 GB. Many micro SD Cards come with an SD Card adapter for compatibility with SD-enabled devices, such as cameras, camcorders and (notebook) computers. Memory cards usually come pre-formatted and do not need to be formatted out of the box.

We recommend storing multimedia files (such as music, videos and pictures) on an external memory card in your device to free up your device’s internal memory for applications. Plus, if you buy a new smartphone, you can simply put your external memory card in your new phone and all your data is back immediately.

The SD Association defines standard speed classes indicating minimum performance to record video. The class indicates the minimum writing speed: Class 2 = 2 MB/s, Class 4 = 4 MB/s, Class 6 = 6 MB/s, Class 10 = 10 MB/s.

SDHC cards are usually shipped preformatted with the FAT file system. Android devices normally only support the FAT file structure. If you insert a card formatted with a different file structure, your device might ask you to reformat the memory card. Formatting your memory card on a PC may cause incompatibilities with your device. Format the memory card only on the device. Go to Settings > Storage > Scroll down > Format SD card > Format SD card > Delete all.

Popular memory cards for this smartphone include, but are not limited to: Kingston Digital 16 GB Class 4 microSDHC Flash Card with SD Adapter and SanDisk 32GB Class 4 Micro SDHC Memory Card With Adapter.

A. Insert a Memory Card

1. Turn off the power so that you won’t lose any stored information. If the device is on, press and hold the power button on the right side of the device and then tap Power off.

2. Remove the back cover. Hold the device in one hand and find the small notch that will help you to release the cover. It’s on the the bottom-left corner of the phone. Insert a fingernail into the notch. Lift upwards gently to pop the phone open. Working from the bottom-left corner to the bottom-right corner and then lifting the back cover upwards seems to work well. Be careful not to damage your fingernails when you remove the back cover. Also, be certain not to bend or twist the back cover excessively. Doing so may damage the cover.

3. Remove the battery. Using your nail or finger, lift up the battery via the small notch at the top of the battery compartment and lift the battery out of the phone.

4. The Memory Card Slot is on the top-left corner of the battery compartment (near the camera lens). First open the metal clip by putting a fingernail at the right side of the clip. Slide the clip to the left until it clicks and then lift it up to open it.

5. Insert a memory card with the gold-coloured contacts facing downwards. It should fit easily and exactly.

6. Close the metal clip. Push it down first and slide the clip to the right until it clicks.

7. Reinstall the battery by aligning the three contacts with the three prongs on the bottom-right side of the battery slot. Use the small white arrow for help. Slide the battery into the battery housing cavity and press down to secure it in place.

8. Replace the back cover. Line up the two holes above the Pixi logo with the rear camera lens and the flash. Gently press the cover down and around the sides of the phone until it clicks into place.

B. Remove a Memory Card

1. Before removing a memory card, first unmount it for safe removal.
Go to Settings > Storage > Scroll down > Unmount SD card.

2. Turn off the power so that you won’t lose any stored information. If the device is on, press and hold the power button on the right side of the device and then tap Power off.

3. Remove the back cover. Follow the instructions above to remove the cover.

4. Remove the battery. Follow the instructions above to remove the battery.

5. The Memory Card Slot is on the top-left corner of the battery compartment (near the camera lens). First open the metal clip by putting a fingernail at the right side of the clip. Slide the clip to the left until it clicks and then lift it up to open it.

6. Pull the memory card out of the memory card slot.

7. Close the metal clip. Push it down first and slide the clip to the right until it clicks.

8. Reinstall the battery. Follow the instructions above to replace the battery.

9. Snap the cover back in place. Follow the instructions above to replace the cover.

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable.

Which ink cartridges do I need for my HP ENVY 114 e-All-in-One series Printer?

For your US HP ENVY 114 e-All-in-One series Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP ENVY 114 e-All-in-One series Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.
2. Load plain Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Open the access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

4. Lift the lid on the cartridge slot to release the cartridge, and then pull the cartridge out of the slot to remove it.

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

6. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the product, and then slide the cartridge into the empty slot. Insert the color cartridge in the slot on the left. Insert the black cartridge in the slot on the right.

8. Squeeze the lid closed as the cartridge slides into place.

9. Repeat the previous steps to install the other cartridge, if necessary.

10. Close the access door.

Align the cartridges
After replacing the cartridges, the alignment process should begin automatically. The product prints an alignment page. Once the alignment page has completed printing, your printer will be ready for regular use.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

A. To align printer from the printer display.
– Touch Setup on the product control panel.
– Touch Tools, and then touch Align Printer. The alignment process begins, and the alignment page automatically prints.

B. To align the printer from the computer.
Follow these steps to align the product using the product software.
– Open the HP product software: Click the Windows icon, click All Programs, click HP, click the folder for your HP product, and then click the icon for your HP product. The product software opens.
– In the product software, double-click Printer Actions. Double-click Maintenance Tasks. The HP Toolbox opens.
– On the Device Services tab, click Align Ink Cartridges. The alignment process begins, and the alignment page automatically prints.

Once the alignment page has completed printing, your printer will be ready for regular use.

Month: February 2016

How to Insert, Remove or Replace a Memory Card in your ALCATEL ONETOUCH PIXI 3(4) (4013D) – Tutorial

How to Replace an Empty Ink Cartridge in the HP ENVY 114 e-All-in-One series – an Illustrated Tutorial in 10 Steps