HP 61 – Page 4 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet 2541 All-in-One series Printer – an Illustrated Tutorial in 16 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the product can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 2541 All-in-One series Printer?

For your US HP Deskjet 2541 All-in-One series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 2541 All-in-One series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load plain white paper into the input tray.

Remove cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.

Insert the new cartridge
5. Remove the new cartridge from its packaging.

6. Pull the coloured tab to remove the plastic tape.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat these steps to replace the other cartridge, if necessary.
10. Close the cartridge access door.

11. Follow any prompts on the screen.

12. The printer prints an alignment page automatically (only when a new cartridge has been installed). Wait about 30 seconds for the alignment page to print and align the cartridges.

Align the cartridges
13. Lift the scanner lid.
14. Place the alignment page with the print side down on the right-front corner of the scanner glass.

15. Close the scanner lid.
16. Press the Start Copy Black button or the Start Copy Color button on the front panel of the printer. The printer aligns the cartridges.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3510 e-All-in-One series Printer – an Illustrated Tutorial in 16 Steps

Which ink cartridges do I need for my HP Deskjet 3510 e-All-in-One series Printer?

For your US HP Deskjet 3510 e-All-in-One series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 3510 e-All-in-One series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.
2. Load plain white paper, if you have not already done so.

Remove the old cartridge
3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.

Insert a new cartridge
5. Remove cartridge from packaging.

6. Remove the plastic tape using the pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat these steps to replace the other cartridge, if necessary.

10. Close the cartridge access door.

11. Follow any prompts on the screen.
12. Wait about 30 seconds for the alignment page to automatically print. If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display on the product.

Align the cartridges

Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

13. Lift the scanner lid.
14. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

15. Close the scanner lid.
16. On the printer control panel press OK to begin the scan. The printer automatically aligns the cartridges.

How to Replace an Empty Ink Cartridge in the HP Deskjet 1051 series Printer – an Illustrated Tutorial in 16 Steps

Which ink cartridges do I need for my HP Deskjet 1051 series Printer?

For your US HP Deskjet 1051 series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 1051 series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

Remove the old cartridge
3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.

Insert a new cartridge
5. Remove cartridge from packaging.

6. Remove plastic tape using pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat these steps to replace the other cartridge, if necessary.

10. Close the cartridge access door.

11. Wait about 30 seconds for the alignment page to automatically print.

Align the cartridges

12. Lift the scanner lid.
13. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

14. Close the scanner lid.
15. Press the Start Copy Black button to begin the scan. The product automatically aligns the cartridges.
16. Wait until the Power light stops blinking, which indicates that the cartridge alignment is complete.

How to Replace an Empty Ink Cartridge in the HP ENVY 4502 e-All-in-One Series Printer – an Illustrated Tutorial in 9 Steps

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Use the single-cartridge mode to operate the HP ENVY 4502 series with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Install both the black and tri-color cartridges in the HP ENVY 4502 series to exit single-cartridge mode.

Which ink cartridges do I need for my HP ENVY 4502 e-All-in-One Series Printer?

For your US HP ENVY 4502 e-All-in-One Series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP ENVY 4502 e-All-in-One Series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.

2. Load paper.

Remove Cartridge
3. Open the cartridge access door. To do this, locate the cutouts on the site of the printer. Use this cutouts to lift the cartridge access door and wait for the print carriage to move to the right side of the printer. Wait until the carriage is idle and silent before you continue.

4. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops. Pull up on the cartridge to remove it from the slot.

Insert New Cartridge
5. Remove cartridge from packaging.

6. Remove plastic tape using pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Slide the new cartridge in the slot at an angle under the opened lid, and then squeeze the lid closed as the cartridge slides into place. The color cartridge is on the left, and the black cartridge is on the right.

8. Close the cartridge access door.

9. Align the cartridges when prompted to do so.
Aligning the cartridges ensures the high-quality output. If you remove and reinstall the same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges. Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges and prints an alignment page.

If the printer did not print an alignment page, follow these steps:
– On the printer Control Panel, press the Down Arrow to scroll to Tools, and then press OK.
– Press the Down Arrow to scroll to Align Printer, and then press OK. The printer prints an alignment page.