How to Replace an Empty Ink Cartridge in the HP Officejet 7310 All-in-one Series Printer – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control-panel, from the printer Toolbox, or the embedded Web server (EWS).

To check the ink levels from the control panel
Look for two icons at the bottom of the color graphics display that represent the levels of ink remaining in the two installed print cartridges.

– A green icon represents an estimate of the amount of ink remaining in the tricolor print cartridge.
– A black icon represents an estimate of the amount of ink remaining in the black print cartridge.
– An orange icon represents an estimate of the amount of ink remaining in the photo print cartridge.
– A blue-gray icon represents an estimate of the amount of ink remaining in the gray photo print cartridge.

If you are using non-HP print cartridges or cartridges that have been refilled, or if there is no print cartridge installed in one of the cartridge stalls, one or both icons might not appear in the icon bar. The HP all-in-one cannot detect the amount of ink remaining in non-HP print cartridges or cartridges that have been refilled.

Ink level warnings and indicators provide estimates for planning purposes only. You do not have to replace the cartridges until the print quality is unacceptable.

Although the manual and online recources of the hp officejet 7310 do not mention an ink-backup (or single-cartrige) mode, you might try to to operate the HP Officejet with only one print cartridge, when you’re out of new cartridges. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts. We do not recommend using the photo print cartridge for ink-backup mode.

Which ink cartridges do I need for my HP Officejet 7310 All-in-one Printer?

Four print cartridges are available for use with the printer.

1. Black
2. Tri-color
3. Photo
4. Gray photo

Everyday printing: Use the black and tri-color print cartridges for everyday print jobs.
– Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and use a photo print cartridge in combination with the tri-color print cartridge.
– Quality black and white photos: For outstanding black and white photographs, remove the black print cartridge and use a gray photo print cartridge in combination with the tri-color cartridge.

For your US HP Officejet 7310 All-in-one Printer you need HP 94 Black OR HP 96 Black cartridges AND HP 95 Tri-color OR HP 97 Tri-color cartridges. Check the price of HP 94 and HP 95 cartridges at Amazon.com .

For printing photos use HP 99 Photo Original cartridges.
For printing black-and-white photographs use HP 100 Gray Photo Original Ink Cartridge cartridges.

For your European or UK HP Officejet 7310 All-in-one Printer you need HP 338 Black OR HP 339 Black cartridges AND HP 343 Tri-color OR HP 344 Tri-color cartridges.

For printing photos use HP 348 Photo Original cartridges.
For printing black-and-white photographs use HP 100 Gray Photo Original Ink Cartridge cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. After you press the On button, the green light flashes, and then becomes solid. This may take up to a minute. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the print-carriage access door by lifting from the front center of the device, until the door locks into place. The print carriage is on the far right side of the HP all-in-one. Wait until the carriage is idle and silent before proceeding.

4. Press down lightly on top of the cartridge latch and pull out the bottom of the latch to unhook it.

5. Push down on the print cartridge to release it, and then gently slide the print cartridge out of the print cartridge cradle. If you are replacing the tri-color print cartridge, lift the green latch on the left. If you are replacing the black, photo, or gray photo print cartridge, lift the black latch on the right.

Insert a new cartridge
6. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

8. Hold the print cartridge with the copper contacts facing the printer, and then slide the print cartridge into the empty slot. Push the print cartridge forward until it clicks into place. After you insert the print cartridge, verify that the copper contacts of the print cartridge touch the back of the print cartridge cradle.

If the print cartridge you are installing has a white triangle on its label, slide the print cartridge into the slot on the left. The latch is green with a solid white triangle on it. If the print cartridge you are installing has a white square or a white pentagon on its label, slide the print cartridge into the slot on the right. The latch is black with a solid white square and a solid white pentagon on it.

9. Push down on the print cartridge latch until it stops. Make sure the latch catches below the bottom tabs, and does not spring back open.

10. Repeat step 4 to 9 to replace the other cartridge, if necessary.

11. Close the top cover.

Align the ink cartridges.
If you installed a new print cartridge, the printer prints an alignment page and aligns the print cartridges. Recycle or discard the page. Note: If you remove and reinstall the same print cartridge, the HP all-in-one will not prompt you to align the print cartridges. The HP all-in-one remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

Aligning the print cartridges ensures high-quality output. You can also align the print cartridges at any time from the control panel or by using the HP Image Zone software on your computer.

To align the cartridges from the control panel at any other time:
– Load letter or A4 unused plain white paper into the input tray.
– Press Setup.
– Press 6, then press 2.

This displays the Tools menu and then selects Align Print Cartridge.
The HP all-in-one prints a print cartridge alignment sheet and aligns the print cartridges. Recycle or discard the page.

How to Replace an Empty Ink Cartridge in the HP Officejet H470 Printer series – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. However, (original) HP XL cartridges for the HP Officejet H470 Printer are NOT available.

You can check the ink levels by using the software (Toolbox) installed with the HP Deskjet.
Open the Toolbox from the HP Solution Center, or from HP Digital Imaging Monitor in the system tray (right click), or from the Printer Properties.
– The tab Estimated Ink Level shows the estimated ink level for each cartridge.

The printer lights also indicate the cartridge status. The left print cartridge light blinks when the left print cartridge is absent or improperly functioning. It turns on solid when the ink is low or empty. The right print cartridge light blinks when the right print cartridge is absent or improperly functioning. It turns on solid when the ink is low or empty.

Ink level warnings and indicators provide estimates for planning purposes only. You do not have to replace the cartridges until the print quality is unacceptable. If one of the print cartridges runs out of ink before you can replace it, you can still print with a single print cartridge. Printing with one print cartridge might be slower and the print quality might be affected. It is recommended to print with both print cartridges.

Which ink cartridges do I need for my HP Officejet H470 Printer?

Three print cartridges are available for use with the printer.

1. Black
2. Tri-color
3. Photo

Everyday printing: Use the black and tri-color print cartridges for everyday print jobs.
– Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and use a photo print cartridge in combination with the tri-color print cartridge.

For your US HP Officejet H470 Printer you need HP 94 Black OR HP 98 Black cartridges AND HP 95 Tri-color OR HP 97 Tri-color cartridges. Check the price of HP 94 and HP 95 cartridges at Amazon.com .

For printing photos use HP 99 Photo Original cartridges.

For your European or UK HP Officejet H470 Printer you need HP 337 Black OR HP 338 Black cartridges AND HP 343 Tri-color OR HP 344 Tri-color cartridges.

For printing photos use HP 348 Photo Original cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press and hold the power button to turn on the printer, if it is not already on. Printer lights will flash in sequence. Wait until the power light is the only printer light that remains lit.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the front access cover. Wait for the carriage to stop moving. This should take only a few seconds.

4. Lift the print cartridge latch open and gently remove the empty print cartridge from its cradle compartment. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge OR photo print cartridges.

Insert a new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the print cartridge with the copper contacts facing the printer, and then slide the print cartridge into its cradle compartment at the same angle at which you removed the old print cartridge. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.

8. Close the print cartridge latch. If the cartridge is inserted correctly, closing the latch gently pushes the cartridge into its cradle compartment. Press the latch to make sure it is seated flat on the cartridge.

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.

10. Close the front access cover. Wait for the carriage to complete the print cartridge initialization routine and return to the home position at the left side of the printer before using the printer.

Align the ink cartridges.
11. Whenever you install a new print cartridge, you should align the print cartridges for the best possible print quality. If your printout is grainy, has stray dots, jagged edges, or the ink is bleeding into another color, you can re-align them through the Toolbox.

Open the Toolbox from the HP Solution Center, or from HP Digital Imaging Monitor in the system tray (right click), or from the Printer Properties.
– Click the Printer Services tab, and then click Align Print Cartridges.
– Follow the onscreen instructions.

How to Replace an Empty Ink Cartridge in the HP Deskjet 5740 Series Printer – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the ink levels by using the software installed with the HP Deskjet. The Device Status window appears each time the printer prints a file. The Ink levels section shows the approximate ink level of each print cartridge.

The Print Cartridge Status lights also indicate the status of the print cartridges. The lights are located in the center of the printer’s control panel.

The left status light represents the tri-color print cartridge, which is installed in the left side of the print cartridge cradle.
– The light is on and solid when the tri-color print cartridge is low on ink.
– The light flashes when the tri-color print cartridge needs to be serviced.

The right status light represents the black OR the photo print cartridge. One of these print cartridges is installed in the right side of the print cartridge cradle.
– The light is on and solid when the black or photo print cartridge is low on ink.
– The light flashes when the black OR photo print cartridge needs to be serviced.

Ink level warnings and indicators provide estimates for planning purposes only. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the Ink-backup Printing Mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge cradle. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts. We do not recommend using the photo print cartridge for ink-backup mode.

Which ink cartridges do I need for my HP Deskjet 5740 Printer?

These print cartridges can be used with the printer:
l. black print cartridge
2. tri-color print cartridge
3. photo print cartridge

Everyday printing: Use the black and tri-color print cartridges for everyday print jobs.
– Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and use a photo print cartridge in combination with the tri-color print cartridge.

For your US HP Deskjet 5740 Printer you need HP 94 Black OR HP 96 Black cartridges AND HP 95 Tri-color OR HP 97 Tri-color cartridges. Check the price of HP 94 and HP 95 cartridges at Amazon.com .

For printing photos use HP 99 Photo Original cartridges.

For your European or UK HP Deskjet 5740 Printer you need HP 338 Black OR HP 339 Black cartridges AND HP 343 Tri-color OR HP 344 Tri-color cartridges.

For printing photos use HP 348 Photo Original cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the printer cover. The carriage moves to the right side of the printer. Wait until the carriage is idle and silent before proceeding.

4. Press down on the empty cartridge to release it, and then pull it toward you to remove it from its slot. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black (OR photo) cartridge.

5. Place the old ink cartridge in an envelope and refer to HP’s recycling instructions at http://www.hp.com/recycle .

Insert a new cartridge
6. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.

7. Remove the plastic tape using the pull tab.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

8. Hold the ink cartridge by its sides with the nozzles toward the printer (HP label on top), then insert the ink cartridge into its correct slot. Slide the new ink cartridge at a slight upward angle into the empty slot, and then gently push the ink cartridge until it snaps into place. Repeat these steps to install the other ink cartridge, if necessary. Insert the tri-color ink cartridge into the left slot. Insert the black OR photo ink cartridge into the right slot.

9. Repeat steps 4 through 8 for the other cartridge if needed.

10. Close the printer cover. The printer automatically prints a calibration page.

Align the ink cartridges
The printer automatically aligns the print cartridges after a new print cartridge is installed. You can also align the print cartridges at other times to ensure optimal print quality.
– Open the printer Toolbox.
– Click Align the Printer.
– Click Align, and then follow the onscreen instructions.
– Discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP Deskjet 460 Mobile Printer – an Illustrated Tutorial in 11 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. However, (original) HP XL cartridges for the HP Deskjet 460 Mobile Printer are NOT available.

You can check the ink levels by using the software (Toolbox) installed with the HP Deskjet.
– Click the Start button, and then point to Programs.
– Point to HP Deskjet 460 Series, and then click HP Deskjet 460 Series Toolbox.
– The tab Ink level information shows estimated ink levels for each cartridge.

The printer lights also indicate the cartridge status. The left print cartridge light blinks when the left print cartridge is absent or improperly functioning. It turns on solid when the ink is low or empty. The right print cartridge light blinks when the right print cartridge is absent or improperly functioning. It turns on solid when the ink is low or empty.

Ink level warnings and indicators provide estimates for planning purposes only. You do not have to replace the cartridges until the print quality is unacceptable. If one of the print cartridges runs out of ink before you can replace it, you can still print with a single print cartridge. Printing with one print cartridge might be slower and the print quality might be affected. It is recommended to print with both print cartridges.

Which ink cartridges do I need for my HP Deskjet 460 Mobile Printer?

Four print cartridges are available for use with the printer.

1. Black
2. Tri-color
3. Photo
4. Gray photo

Everyday printing: Use the black and tri-color print cartridges for everyday print jobs.
– Quality color photos: For more vibrant colors when printing color photographs or other special documents, remove the black print cartridge and use a photo print cartridge in combination with the tri-color print cartridge.
– Quality black and white photos: For outstanding black and white photographs, remove the black print cartridge and use a gray photo print cartridge in combination with the tri-color cartridge.

For your US HP Deskjet 460 Mobile Printer you need HP 94 Black cartridges AND HP 95 Tri-color OR HP 97 Tri-color cartridges. Check the price of HP 94 and HP 95 cartridges at Amazon.com .

For printing photos use HP 99 Photo Original cartridges.
For printing black-and-white photographs use HP 100 Gray Photo Original Ink Cartridge cartridges.

For your European or UK HP Deskjet 460 Mobile Printer you need HP 338 Black cartridges AND HP 343 Tri-color OR HP 344 Tri-color cartridges.

For printing photos use HP 348 Photo Original cartridges.
For printing black-and-white photographs use HP 100 Gray Photo Original Ink Cartridge cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press and hold the power button to turn on the printer, if it is not already on. Printer lights will flash in sequence. Wait until the power light is the only printer light that remains lit.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the front access cover. Wait for the carriage to stop moving. This should take only a few seconds.

4. Lift the print cartridge latch open and gently remove the empty print cartridge from its cradle compartment. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge OR photo print cartridges.

Insert a new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.

7. Hold the print cartridge with the copper contacts facing the printer, and then slide the print cartridge into its cradle compartment at the same angle at which you removed the old print cartridge. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.

8. Close the print cartridge latch. If the cartridge is inserted correctly, closing the latch gently pushes the cartridge into its cradle compartment. Press the latch to make sure it is seated flat on the cartridge.

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.

10. Close the front access cover. Wait for the carriage to complete the print cartridge initialization routine and return to the home position at the left side of the printer before using the printer.

Align the ink cartridges.
11. Whenever you install a new print cartridge, you should align the print cartridges for the best possible print quality. If your printout is grainy, has stray dots, jagged edges, or the ink is bleeding into another color, you can re-align them through the Toolbox.
– Click the Start button (PC), and highlight Programs.
– Point to HP Deskjet 460 Series, and then click HP Deskjet 460 Series Toolbox.
– Click the Printer Services tab, click Align Print Cartridges, and then follow the onscreen instructions.