How to Replace an Empty Ink Cartridge in the HP Officejet Pro 6830 All-in-One Inkjet Printer

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. HP recommends that you replace any missing cartridges as soon as possible to avoid print quality issues and possible extra ink usage or damage to the ink system. Never turn off the printer when ink cartridges are missing.

Which ink cartridges do I need for my HP Officejet Pro 6830 All-in-One Inkjet Printer?

For your US, European and UK HP Officejet Pro 6830 All-in-One Inkjet Printer you need HP 934 Black (XL) AND HP 935 Cyan/Magenta/Yellow (XL) cartridges. There are also Combo Packs (4 cartridges in one pack) available, like the HP 934XL Black and 935 Tri-color (Cyan, Magenta, Yellow) Combo Pack. Check the price of HP 934 and HP 935 cartridges at Amazon.com .

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Make sure the printer is turned on.

2. Slip your fingers into the slot on the left side of the printer, and then lift to open the cartridge access door. The carriage moves to the left side of the printer. Wait until the carriage is idle and silent before you proceed.
hp officejet pro 6830_01 hp officejet pro 6830_02

3. Push the ink cartridge inward and then pull up to remove it from the slot.
hp officejet pro 6830_03

4.
a. Remove the new ink cartridge from its packaging.
b. Pull the orange tab on the wrapper straight back. Make sure that you remove the orange pull-tab completely otherwise, ink might leak from the cartridge. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to properly vent the cartridge.
hp officejet pro 6830_04

c. Hold the cartridge by its sides, and then twist the protective orange cap counter-clockwise to snap it off the cartridge. Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
hp officejet pro 6830_05

hp cartridge01

5. Using the color-coded letters for help, slide the ink cartridge into the empty slot until it clicks securely into the slot.
hp officejet pro 6830_06
Make sure that you insert the ink cartridge into the slot that has the same colored letter as the color you are installing.
hp officejet pro 6830_07

6. Repeat steps 3 through 5 for each ink cartridge you are replacing.

7. Close the ink cartridge access door.
hp officejet pro 6830_08

8. Align the printhead if necessary.
The printer automatically aligns the printhead during the initial setup. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. Load Letter or A4 unused plain white paper into the input tray first. You can align the printhead from the printer’s control panel, from the HP printer software or embedded web server (EWS).

How to Replace an Empty Ink Cartridge in the HP Officejet Pro 8610 / 8620 / 8630 e-All-in-One Printer

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. For regular usage, this printer is not designed to print using only the black cartridge when the color cartridges are out of ink. However, your printer is designed to let you print as long as possible when your cartridges start to run out of ink. When there is sufficient ink in the printhead, the printer will offer you the use of black ink only when one or more of the color cartridges are out of ink, and the use of color ink only when the black cartridge is out of ink.

Which ink cartridges do I need for my HP Officejet Pro 8610 / 8620 / 8630 Printer?

For your US, European and UK HP Officejet Pro 8610 / 8620 / 8630 Printer you need HP 950 Black AND HP 951 Cyan/Magenta/Yellow cartridges. There are also Combo Savers (2 cartridges in one pack) available, like the HP 950XL Black and 951 Tri-color (Cyan, Magenta, Yellow) Combo Saver.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the power button (#9).
2. Pull out main input tray (#7), load paper and slide in the input tray.
hp officejet pro 8610 8620 8630_01

3. Open the ink cartridge access door (#1). Wait until the print carriage stops moving before proceeding.
hp officejet pro 8610 8620 8630_02

4. Find the cartridge you want to replace. Press the front of the ink cartridge to release it, and then remove it from the slot.
hp officejet pro 8610 8620 8630_03

5. Remove the new ink cartridge from its packaging. Do NOT touch the electrical contacts and ink port.

6. Using the color-coded letters for help, slide the ink cartridge into the empty slot until it is securely installed in the slot.
hp officejet pro 8610 8620 8630_04
Make sure that you insert the ink cartridge into the slot that has the same colored letter as the color you are installing.
hp officejet pro 8610 8620 8630_05

7. Repeat steps 3 through 6 for each ink cartridge you are replacing.

8. Close the print-carriage access door.

9. Align the printhead if necessary.
The printer automatically aligns the printhead during the initial setup. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. You can align the printhead from the printer’s control panel, from the Toolbox (Windows) or HP Utility (OS X).

How to Replace an Empty Ink Cartridge in the HP Officejet 150 Mobile All-in-One Printer

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. If one of the ink cartridges runs out of ink before you can replace it, you can still print with a single ink cartridge. Printing with one ink cartridge might be slower and the print quality might be affected. It is recommended to print with both ink cartridges. For borderless printing, the tri-color ink cartridge must be installed.

Which ink cartridges do I need for my HP Officejet 150 Mobile All-in-One Printer?

For your US HP Officejet 150 Mobile All-in-One Printer you need HP 98 Black or HP 94 Black cartridges and HP 95 Tri-color or HP 97 Tri-color cartridges.
For your European or UK HP Officejet 150 Mobile All-in-One Printer you need HP 337 Black or HP 338 Black cartridges and HP 343 Tri-color or HP 344 Tri-color cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Remove the new ink cartridge from its package and then pull the colored tab to remove the protective film from the cartridge.
HP Officejet 150_01
1. Copper-colored contacts
2. Plastic tape with pink pull tab (must be removed before installing)
3. Ink nozzles under tape

! Do not touch the copper-colored electrical contacts or the ink nozzles !
do not touch contacts

2. With the printer turned on, open the cartridge access door. Wait for the carriage to stop moving. This should take only a few seconds.
HP Officejet 150_02

3. Lift the ink cartridge latch open and gently remove the ink cartridge from its cradle compartment.
HP Officejet 150_03

4. Insert the new ink cartridge into its cradle compartment at the same angle at which you removed the old ink cartridge.
HP Officejet 150_04

5. Close the ink cartridge latch. If the cartridge is inserted correctly, closing the latch gently pushes the cartridge into its cradle compartment. Press the latch to make sure it is seated flat on the cartridge.
HP Officejet 150_05

6. Close the cartridge access door.

7. Wait for the carriage to complete the ink cartridge initialization routine before using the printer.

8. Align the ink cartridges. Whenever you install a new ink cartridge, you should align the ink cartridges for the best possible print quality. If the printout is grainy, has stray dots, jagged edges, or the ink is bleeding into another color, you can realign them through Toolbox, or HP Utility (Mac OS). Load plain paper into the input tray before aligning the ink cartridges. An alignment page is printed during the alignment process.

How to Replace an Empty Ink Cartridge in the HP Officejet 2620 All-in-One Printer

1. Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP Officejet 2620 e-All-in-One Printer?

For your US HP Officejet 2620 e-All-in-One Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Officejet 2620 e-All-in-One Printer you need HP 301 or HP 301XL cartridges.

2. Check that power is on.

3. Load paper.

4. Remove cartridge.
a. Open the cartridge access door and wait for the print carriage to move to the center of the printer.
hp officejet 2620_01
b. Press down to release the ink cartridge, and then remove it from the slot.
hp officejet 2620_02

5. Insert new ink cartridge.
a. Remove the ink cartridge from the packaging.
hp officejet 2620_03
b. Remove the plastic tape using the pink pull tab.
hp officejet 2620_04
! Do not touch the copper-colored electrical contacts or the ink nozzles !
do not touch contacts
c. Slide the ink cartridge into slot until it clicks into place.
hp officejet 2620_05
d. Close the cartridge access door.
hp officejet 2620_06

The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. The printer usually prints an alignment sheet automatically. If it doesn’t, go to your printer software to print the alignment sheet manually.

6. Load the alignment sheet print-side down on the right front corner of the scanner glass.
hp officejet 2620_07

7. Follow the instructions on the printer display to align the cartridges. Recycle or discard the cartridge alignment sheet.