How to Replace an Empty Ink Cartridge in the HP Officejet Pro 8500A Plus e-All-in-One series – an Illustrated Tutorial in 9 Steps

disclosure

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer software, Control-panel, or the embedded Web server. The icon below on the Control-panel displays a screen where you can see information about the ink cartridges, including fill levels. This icon has a red border when an ink cartridge needs attention. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not need to replace cartridges until prompted to do so.
hp-officejet-pro-8500a-plus_01

Which ink cartridges do I need for my HP Officejet Pro 8500A Plus Printer Series?

For your US HP Officejet Pro 8500A Plus e-All-in-One you need HP 940 Black (XL) AND HP 940 Cyan/Magenta/Yellow (XL) cartridges. There are also Combo Packs (4 cartridges in one pack) available, like the HP 940XL Black Ink Cartridge and HP 940 Colors Standard Yield Cartridges Four Color Combo Pack. Check the price of HP 940 cartridges at Amazon.com .

For your European and UK HP Officejet Pro 8500A Plus e-All-in-One you need HP 940 Black (XL) AND HP 940 Cyan/Magenta/Yellow cartridges (XL). There are also Combo Packs (4 cartridges in one pack) available, like the HP 940XL 4-pack High Yield Black/Cyan/Magenta/Yellow Original Ink Cartridges (C2N93AE).

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.
hp-officejet-pro-8500a-plus_02

2. Load plain unused Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Gently pull open the ink cartridge cover.
hp-officejet-pro-8500a-plus_03

4. Remove the ink cartridge that requires replacement by grasping it between your thumb and forefinger and pulling it firmly toward you.
hp-officejet-pro-8500a-plus_04

hp-officejet-pro-8500a-plus_05

Insert a new cartridge
5. Remove the new ink cartridge from its package. Be careful to touch only the plastic on the cartridge. Do NOT touch the electrical contacts and ink port.
hp-officejet-pro-8500a-plus_06

6. Hold the cartridge by its sides with the nozzle toward the product, and then insert the cartridge into its color-coded slot.
hp-officejet-pro-8500a-plus_07

7. Press the cartridge forward into the slot until it snaps into place.
hp-officejet-pro-8500a-plus_08

8. If more than one cartridge is low on ink, repeat the steps to insert the other cartridges.
9. Close the ink cartridge cover.
hp-officejet-pro-8500a-plus_09

Align the printhead only if necessary.
The printer automatically aligns the printhead during the initial setup. You might want to use this feature when the printer status page shows streaking or white lines through any of the blocks of color or if you are having print quality issues with your printouts. You can align the printhead from the printer’s control panel, from the Toolbox (Windows) or HP Utility (OS X), and from the embedded web server (EWS).

– From the Control panel: Touch right arrow , touch Setup, touch Tools, and then select Align Printer.
– From the Embedded Web server: Click the Settings tab, click Device Services in the left pane, select Align Printer from the drop-down list in the Print Quality section, and then click Run Diagnostic.
– From the HP Software (Windows): Open the HP software that was included with the printer. Click Printer Actions, click Maintenance Tasks, and then click Align Printheads.
hp-officejet-pro-8500a-plus_10



Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.