How to Upgrade RAM Memory of the Samsung N150 Pine Trail Netbook – a Complete Guide

A computer memory upgrade is often the best way of increasing overall computer performance, and upgrading netbook memory is often one of the easiest computer upgrades. Do you want to get a little more power out of your Samsung N150 Pine Trail powered Netbook? Upgrade that 1GB memory module with a 2GB SODIMM. It will speed up opening new applications, running multiple applications at once, and switching between software applications (multi-tasking). Here’s a complete and easy guide on how to upgrade your Samsung N150’s memory.

Purchase the right memory.

Intel Atom N450 (Pineview) based machines can’t access more than 2GB of RAM in total. A 1GB memory module is installed in the memory slot at the bottom of your computer. There is, however, only one memory slot on the motherboard, so this means that you’ll have to remove the current RAM module in order to insert a new one. For your Samsung N150 you need a standard 200 pin DDR2 SODIMM laptop memory module (not desktop memory). Select a 2GB DDR2 SODIMM memory module of 667MHz or 800MHz. These may be referenced as PC2-5400 or PC2-6400. Recommended brands include, but are not limited to, Crucial, Corsair, Kingston, Patriot, Hynix and Viking.

(#ad or paid links)

  • Crucial 2GB Single DDR2 667MHz (PC2-5300) CL5 SODIMM 200-Pin Notebook Memory Module CT25664AC667
    This is by far the most popular Netbook memory replacement at the moment.
  • Crucial 2GB Single DDR2 800MHz (PC2-6400) CL6 SODIMM 200-Pin Notebook Memory Module CT25664AC800
  • Corsair VS2GSDS667D2 2GB (1x2GB) DDR2 667 MHz (PC2 5300) Laptop Memory
  • A 1GB memory module is installed in the memory slot at the bottom of your computer. There is, however, only one memory slot on the motherboard so this means that you’ll have to remove the current RAM module in order to insert a new one. The procedure to replace the memory is described below.

    1. Shut down the computer completely.

    2. Power off your Samsung N150 Netbook if it’s on. Also, unplug the AC power adapter.

    3. Prepare your netbook by placing it upside-down on a flat surface with some form of soft padding. Static electricity can damage your module and other computer parts. Make sure that you are working in a static-safe environment. Remove any plastic bags or papers from your work space.

    4. Remove the battery. This will prevent you from accidentally shorting anything on the system board during this process. Pull the two battery latches outwards, then remove the battery.

    5. Discharge residual power by pressing the power button.

    6. Be sure to ground yourself. Touch something metal, like a tap, for a couple of seconds and you should be fine.

    7. The memory stick is secured in a dedicated compartment at the bottom side of your netbook.

    a. Remove the screw that secures the compartment cover using an Electronics Repair Screwdriver Set


    (#ad or paid links)
    .

    b. Remove the compartment cover.

    8. Press outwards on the latches on both edges of the socket at the same time. Remove the SODIMM; it should pop right out. Be sure to save the old SODIMM for future use.

    9. Most memory will be sold in a piece of hard, clear plastic. Gently remove the new module from the packaging by pressing on it from the plastic side. Avoid bending the module or applying too much force to the packaging. When you remove the SODIMM memory module from its packaging hold it by the edges, try not to touch the gold colored contacts as this can damage the memory.

    10. Turn the module so the teeth are facing the SODIMM slot and the sticker is face down. It’s impossible to put the memory module in backwards thanks to the notches which “key” it with the slot. Insert the notched end of the SODIMM into the socket. This is important; you want to stick in the new memory module at a 30 degree angle. Press the SODIMM firmly, and pivot it until it snaps into place.

    11. Push the memory module down so that it’s completely fixed and the metal retaining clips clasp into the grooves on either side of the module. If the memory does not fit easily, take it out and try again. If necessary, push the SODIMM module down, while puling the memory module latches outward. The module should usually be seated so that you don’t see any of the gold contacts.

    12. Before you close your case, replace the battery. Just slide the battery into the system. The battery latches move inwards and fix the battery automatically.

    Test it.
    13. Turn your computer back on. The BIOS automatically detects the amount of memory in the system and configures CMOS accordingly during the Power-On Self-Test (POST) process. There is no hardware or software (including BIOS) setup required after the memory is installed. You should see the new amount of memory displayed on your start-up screens or in the properties for “My Computer”. Right click on the “My Computer” icon and select “properties”. The screen which appears should show approximately 2GB of RAM. The memory capacity reported in Windows is less than the actual capacity of memory. This is because BIOS or the onboard graphics uses a portion of memory or claims it for further use.

    If you don’t see approximately 2GB in “My Computer”, reboot and press F2 repeatedly until you get to the BIOS screen. It will then see the 2 Gig.

    14. If everything works correctly, you are done and you can reinstall the memory compartment cover. If you have any problems, go to step 15 for troubleshooting tips.

    15. Troubleshooting. If you have trouble with your new RAM, check these things first. Check the power cords. Is everything plugged in properly? Check the module. Try removing the module and replacing it to make sure it is seated properly in the slot. If you’re still having difficulties with your RAM, check the Crucial FAQ section. You may find an easy solution for your problem.

    16. Close the memory compartment cover and fasten te screw.

    Enjoy!

How-to-Guide: Upgrade the RAM Memory of the Toshiba NB305 and NB300 Netbook (with the latest Intel Atom N455 CPU and DDR3 RAM Memory) – a Complete Tutorial

Adding RAM is often the most cost-effective upgrade you can make to speed up a computer. When a computer runs short of RAM, it’s forced to swap the overflow data on and off of the hard drive, which can significantly slow performance. Fortunately, upgrading netbook memory is often one of the easiest computer upgrades. Do you want to get a little more power out of your Toshiba NB305 / NB300 Intel Atom N455 powered Netbook? Upgrade that 1GB DDR3 memory module with a 2GB SODIMM. It will speed up opening new applications, running multiple applications at once, and switching between software applications (multi-tasking). Here’s a complete and easy guide on how to upgrade your Toshiba NB305 (or NB300)’s memory.

Note: The Toshiba NB305 / NB 300 comes either with an N455 CPU and DDR 3 memory or with an N450 (Pineview) CPU and DDR2 memory. For an upgrade tutorial of the N450 DDR2 powered netbook CLICK HERE.

Purchase the right memory.

Intel Atom N455 based machines can’t access more than 2GB of DDR3 RAM in total. A 1GB DDR3 memory module is installed in the memory slot at the bottom of your computer. There is, however, only one memory slot on the motherboard, so this means that you’ll have to remove the current RAM module in order to insert a new one. For your Toshiba NB305 or NB300 with the latest Intel Atom N455 CPU and DDR3 RAM memory you need a 204 pin DDR3 SODIMM laptop memory module (not desktop memory). Select a 2GB DDR3 SODIMM memory module of 1066MHz. This may be referenced as PC3-8500. The 1066MHz stick will work, but the speed is throttled down to the motherboard bus speed of 800MHz. Recommended memory brands include, but are not limited to, Corsair, Kingston, Patriot, Hynix and Viking.

Examples

It appears many people are experiencing problems when upgrading DDR3 powered netbooks. Toshiba acknowledges there is a problem too. Only certain (upcoming) models of RAM will work with this netbook. Confirmed working SODIMMs for this netbook (updated Sept 25, 2010):

1) 2GB, 204-pin SODIMM, DDR3 PC3-8500 memory module CT1290294

Module Size: 2GB
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 / CL=7 / Unbuffered / NON-ECC / DDR3-1066 / 1.5V / 256Meg x 64 /

2) Kingston 2GB 1066Hz Single Rank Module KTT1066D3S/2G.

This SODIMM is available from Amazon: Kingston KTT1066D3S/2G RAM Module 2 GB (1 x 2 GB) DDR3 SDRAM 1066MHz DDR31066/PC38500204pin SoDIMM KTT1066D3S/2G

3) Toshiba PA3856U-1M2G should work too, but I can’t find an online retailer selling it.

A DDR3 memory module is installed in the memory slot at the bottom of your computer. There is, however, only one memory slot on the motherboard so this means that you’ll have to remove the current RAM module in order to insert a new one. The procedure to replace the memory is described below.

1. Shut down the computer completely.

2. Power off your NB305 / NB300 if it’s on. Also, unplug the AC power adapter.

3. Prepare your netbook by placing it upside-down on a flat surface with some form of soft padding. Static electricity can damage your module and other computer parts. Make sure that you are working in a static-safe environment. Remove any plastic bags or papers from your work space.

4. Remove the battery. This will prevent you from accidentally shorting anything on the system board during this process. The spring battery lock keeps the battery pack secure. When removing the battery pack, this spring lock must be retained in the unlocked position.

5. If the computer has been running recently, the memory module may be hot. The surrounding area may also be hot. Allow the module to cool to room temperature before replacing it.

6. Discharge residual power by pressing the power button.

7. Be sure to ground yourself. Touch something metal, like a tap, for a couple of seconds and you should be fine.

8. The solid-state drive and memory are secured in a dedicated compartment. Remove the Memory compartment cover.
a. Use a small Electronics Repair Screwdriver Set


(#ad or paid links)
to remove the screw that secures the compartment cover.
b. Remove the compartment cover.

9. Press outwards on the latches on both edges of the socket at the same time, remove the SODIMM; The memory module pops up slightly. Gently lift the memory module to a 30-degree angle and slide it out of the slot. Be sure to save the old SODIMM for future use.

10. Most memory will be sold in a piece of hard, clear plastic. Gently remove the new module from the packaging by pressing on it from the plastic side. Avoid bending the module or applying too much force to the packaging. When you remove the SODIMM memory module from its packaging hold it by the edges, try not to touch the gold colored contacts as this can damage the memory.

11. Turn the module so the teeth are facing the SODIMM slot and the sticker is face down. It’s impossible to put the memory module in backwards thanks to the notches which “key” it with the slot. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. This is important; you want to stick in the new memory module at a 30 degree angle. Firmly press the memory module into the memory slot’s socket. The module should be seated so that you don’t see any of the gold contacts.

12. Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module. Make sure that it is firmly fixed in the slot and does not move easily. If the memory does not fit easily or if the latches and cutouts do not line up correctly, repeat step 9 and 11, take it out and try again.

13. Before you close your case, replace the battery. When the battery pack is inserted, it will automatically lock.

Test it.
14. Turn your computer back on. The BIOS automatically detects the amount of memory in the system and configures CMOS accordingly during the Power-On Self-Test (POST) process. There is no hardware or software (including BIOS) setup required after the memory is installed. You should see the new amount of memory displayed on your startup screens or in the properties for “My Computer”. Right click on the “My Computer” icon and select “properties”. The screen which appears should show approximately 2GB of RAM. The memory capacity reported in Windows might be less than the actual capacity of memory. This is because BIOS or the onboard graphics uses a portion of memory or claims it for further use.

15. If everything works correctly, you are done and you can reinstall the memory compartment cover. If you have any problems, go to step 16 for troubleshooting tips.

16. Troubleshooting. If you have trouble with your new RAM, check these things first. Check the power cords. Is everything plugged in properly? Check the module. Try removing the module and replacing it to make sure it is seated properly in the slot. If you’re still having difficulties with your RAM, check the Crucial FAQ section. You may find an easy solution for your problem.

17. Close the Hard Disk Drive/Memory compartment cover.

Enjoy!

How-to-Guide: Upgrade RAM Memory of the Toshiba NB305 and NB300 Netbook (with Intel Atom N450 CPU – a Complete Tutorial

Note: The Toshiba NB305 / NB 300 comes either with an N455 CPU and DDR 3 memory or with an N450 (Pineview) CPU and DDR2 memory. For an upgrade tutorial of the N455 DDR3 powered netbook CLICK HERE.

Adding RAM is often the most cost-effective upgrade you can make to speed up a computer. When a computer runs short of RAM, it’s forced to swap the overflow data on and off of the hard drive, which can significantly slow performance. Fortunately, upgrading netbook memory is often one of the easiest computer upgrades. Do you want to get a little more power out of your Toshiba NB305 or NB300 Pine Trail powered Netbook? Upgrade that 1GB DDR2 memory module with a 2GB SODIMM. It will speed up opening new applications, running multiple applications at once, and switching between software applications (multi-tasking). Here’s a complete and easy guide on how to upgrade your Toshiba NB305 (or NB300)’s memory.

Purchase the right memory.

Intel Atom N450 (Pineview) based machines can’t access more than 2GB of RAM in total. A 1GB memory module is installed in the memory slot at the bottom of your computer. There is, however, only one memory slot on the motherboard, so this means that you’ll have to remove the current RAM module in order to insert a new one. For your Toshiba NB305 or NB300 you need a standard 200 pin DDR2 SODIMM laptop memory module (not desktop memory). Select a 2GB DDR2 SODIMM memory module of 667MHz or 800MHz. These may be referenced as PC2-5400 or PC2-6400. The faster 800MHz stick will work, but it won’t make a difference in speed as it’s just throttled down to the motherboard bus speed of 667MHz. Recommended memory brands include, but are not limited to, Crucial, Corsair, Kingston, Patriot, Hynix and Viking.

(#ad or paid links)

  • Crucial 2GB Single DDR2 667MHz (PC2-5300) CL5 SODIMM 200-Pin Notebook Memory Module CT25664AC667
    This is by far the most popular Netbook memory replacement at the moment.
  • Crucial 2GB Single DDR2 800MHz (PC2-6400) CL6 SODIMM 200-Pin Notebook Memory Module CT25664AC800
  • Corsair VS2GSDS667D2 2GB (1x2GB) DDR2 667 MHz (PC2 5300) Laptop Memory
  • 1. Shut down the computer completely.

    2. Power off your NB305 / NB300 if it’s on. Also, unplug the AC power adapter.

    3. Prepare your netbook by placing it upside-down on a flat surface with some form of soft padding. Static electricity can damage your module and other computer parts. Make sure that you are working in a static-safe environment. Remove any plastic bags or papers from your work space.

    4. Remove the battery. This will prevent you from accidentally shorting anything on the system board during this process. The spring battery lock keeps the battery pack secure. When removing the battery pack, this spring lock must be retained in the unlocked position.

    5. If the computer has been running recently, the memory module may be hot. The surrounding area may also be hot. Allow the module to cool to room temperature before replacing it.

    6. Discharge residual power by pressing the power button.

    7. Be sure to ground yourself. Touch something metal, like a tap, for a couple of seconds and you should be fine.

    8. The solid-state drive and memory are secured in a dedicated compartment. Remove the Memory compartment cover.
    a. Use a small Electronics Repair Screwdriver Set


    (#ad or paid links)
    to remove the screw that secures the compartment cover.
    b. Remove the compartment cover.

    9. Press outwards on the latches on both edges of the socket at the same time, remove the SODIMM; The memory module pops up slightly. Gently lift the memory module to a 30-degree angle and slide it out of the slot. Be sure to save the old SODIMM for future use.

    10. Most memory will be sold in a piece of hard, clear plastic. Gently remove the new module from the packaging by pressing on it from the plastic side. Avoid bending the module or applying too much force to the packaging. When you remove the SODIMM memory module from its packaging hold it by the edges, try not to touch the gold colored contacts as this can damage the memory.

    11. Turn the module so the teeth are facing the SODIMM slot and the sticker is face down. It’s impossible to put the memory module in backwards thanks to the notches which “key” it with the slot. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. This is important; you want to stick in the new memory module at a 30 degree angle. Firmly press the memory module into the memory slot’s socket. The module should be seated so that you don’t see any of the gold contacts.

    12. Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module. Make sure that it is firmly fixed in the slot and does not move easily. If the memory does not fit easily or if the latches and cutouts do not line up correctly, repeat step 9 and 11, take it out and try again.

    13. Before you close your case, replace the battery. When the battery pack is inserted, it will automatically lock.

    Test it.
    14. Turn your computer back on. The BIOS automatically detects the amount of memory in the system and configures CMOS accordingly during the Power-On Self-Test (POST) process. There is no hardware or software (including BIOS) setup required after the memory is installed. You should see the new amount of memory displayed on your startup screens or in the properties for “My Computer”. Right click on the “My Computer” icon and select “properties”. The screen which appears should show approximately 2GB of RAM. The memory capacity reported in Windows might be less than the actual capacity of memory. This is because BIOS or the onboard graphics uses a portion of memory or claims it for further use.

    15. If everything works correctly, you are done and you can reinstall the memory compartment cover. If you have any problems, go to step 16 for troubleshooting tips.

    16. Troubleshooting. If you have trouble with your new RAM, check these things first. Check the power cords. Is everything plugged in properly? Check the module. Try removing the module and replacing it to make sure it is seated properly in the slot. If you’re still having difficulties with your RAM, check the Crucial FAQ section. You may find an easy solution for your problem.

    17. Close the Hard Disk Drive/Memory compartment cover.

    Enjoy!

How-to-Guide: Upgrade RAM Memory of the HP Mini 210 Netbook – a Complete Tutorial

Adding RAM is often the most cost-effective upgrade you can make to speed up a computer. When a computer runs short of RAM, it’s forced to swap the overflow data on and off of the hard drive, which can significantly slow performance. Fortunately, upgrading netbook memory is often one of the easiest computer upgrades. Do you want to get a little more power out of your HP Mini 210 Netbook Pine Trail powered Netbook? Upgrade that 1GB memory module with a 2GB SODIMM. It will speed up opening new applications, running multiple applications at once, and switching between software applications (multi-tasking). Here’s a complete and easy guide on how to upgrade your HP Mini 210 Netbook’s memory.

Purchase the right memory.

Intel Atom N450 (Pineview) based machines can’t access more than 2GB of RAM in total. A 1GB memory module is installed in the memory slot inside your computer. There is, however, only one memory slot on the motherboard, so this means that you’ll have to remove the current RAM module in order to insert a new one. For your HP Mini 210 Netbook you need a standard 200 pin DDR2 SODIMM laptop memory module (not desktop memory). Select a 2GB DDR2 SODIMM memory module of 667MHz or 800MHz. These may be referenced as PC2-5400 or PC2-6400. HP recommends a 667MHz SODIMM. A faster 800MHz stick will also work, but it won’t make a difference in speed as it’s just throttled down to the motherboard bus speed of 667MHz. Recommended memory brands include, but are not limited to, Crucial, Corsair, Kingston, Patriot, Hynix and Viking.

(#ad or paid links)

  • Crucial 2GB Single DDR2 667MHz (PC2-5300) CL5 SODIMM 200-Pin Notebook Memory Module CT25664AC667
    This is by far the most popular Netbook memory replacement at the moment.
  • Crucial 2GB Single DDR2 800MHz (PC2-6400) CL6 SODIMM 200-Pin Notebook Memory Module CT25664AC800
  • Corsair VS2GSDS667D2 2GB (1x2GB) DDR2 667 MHz (PC2 5300) Laptop Memory
  • The computer has one memory module compartment, which is located on the bottom of the computer,
    beneath the removable bottom panel. There is, however, only one memory slot on the motherboard so this means that you’ll have to remove the current RAM module in order to insert a new one. The procedure to replace the memory is described below.

    1. Shut down your Netbook completely.

    2. Disconnect all external devices connected to your HP Mini 210.

    3. Power off your Mini 210 if it’s on. Also, unplug the AC power adapter.

    4. Prepare your Mini 210 by placing it upside-down on a flat surface with some form of soft padding. Static electricity can damage your module and other computer parts. Make sure that you are working in a static-safe environment. Remove any plastic bags or papers from your work space.

    5. Remove the battery. This will prevent you from accidentally shorting anything on the system board during this process.
    a) Slide the battery release latches (1) to release the battery.
    b) Remove the battery (2) from the computer.

    6. Discharge residual power by pressing the power button.

    7. If your device has WWAN capability, remove the SIM (select models only).
    a) Press in on the SIM. The module is partially ejected from the SIM slot.
    b) Remove the SIM from the SIM slot.

    8. Electrostatic discharge (ESD) can damage electronic components, so be sure to ground yourself. Touch a large or grounded piece of metal (like a tap) for a couple of seconds and you should be fine.

    9. Remove the bottom panel:
    a. Press the inner release latches (2) on the left and right sides to loosen the bottom panel.
    b. Pull away the bottom panel (3).

    10.
    a) Pull away the retention clips (1) on each side of the memory module. The memory module tilts up.
    b) Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot at an angle.

    11. Most memory will be sold in a piece of hard, clear plastic. Gently remove the new module from the packaging by pressing on it from the plastic side. Avoid bending the module or applying too much force to the packaging. When you remove the SODIMM memory module from its packaging hold it by the edges, try not to touch the gold colored contacts as this can damage the memory.

    12. Insert a new memory module:
    a) Align the notched edge (1) of the memory module with the tab in the memory module slot.
    b) With the memory module at a 45-degree angle from the surface of the memory module
    compartment, press the module (2) into the memory module slot until it is seated.
    c) Gently press the memory module (3) down, applying pressure to the left and right edges of
    the memory module, until the retention clips snap into place. Make sure the memory module is completely fixed. If the memory does not fit easily, push the memory module down while puling the memory module latches outward. The module should be seated so that you don’t see any of the gold contacts.

    13. Replace the removable bottom panel:
    a. With the battery bay away from you, position the bottom panel at a 45–degree angle from the
    surface of the computer so that the tabs on the underside of the panel align with the matching
    slots on the computer (1).
    b. Gently press the bottom panel (2) down, applying pressure to both the left and right edges of
    the panel, until it snaps into place.

    14. Insert your 3G SIM card if you have one.

    15. Test it. To install the battery again, slide the battery into the system. Turn your computer back on. The BIOS automatically detects the amount of memory in the system and configures CMOS accordingly during the Power-On Self-Test (POST) process. There is no hardware or software (including BIOS) setup required after the memory is installed. You should see the new amount of memory displayed on your start-up screens or in the properties for “My Computer”. Right click on the “My Computer” icon and select “properties”. The screen which appears should show approximately 2GB of RAM. The memory capacity reported in Windows might be less than the actual capacity of memory. This is because BIOS or the onboard graphics uses a portion of memory or claims it for further use. You can also Hold F10 during start-up. The BIOS Setup Utility screen will open and the System Memory item shows the total amount of memory installed in your netbook. If you have any problems, go to step 16 for troubleshooting tips.

    16. Troubleshooting. If you have trouble with your new RAM, check these things first. Check the power cords. Is everything plugged in properly? Check the module. Did both side clips snap to hold the module firmly in place? Try removing the module and replacing it to make sure it is seated properly in the slot. If you’re still having difficulties with your RAM, check the Crucial FAQ section. You may find an easy solution for your problem.

    Enjoy!