All-in-One series – Page 15 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP Deskjet 1051 series Printer – an Illustrated Tutorial in 16 Steps

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage. During single-cartridge mode, the product can only print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 1051 series Printer?

For your US HP Deskjet 1051 series Printer you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 1051 series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.
2. Load plain white paper, if you have not already done so.

Remove the old cartridge
3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.

Insert a new cartridge
5. Remove cartridge from packaging.

6. Remove plastic tape using pink pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat these steps to replace the other cartridge, if necessary.

10. Close the cartridge access door.

11. Wait about 30 seconds for the alignment page to automatically print.

Align the cartridges

Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges. If necessary, you can also align the cartridges from the printer software.

12. Lift the scanner lid.
13. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

14. Close the scanner lid.
15. Press the Start Copy Black button to begin the scan. The product automatically aligns the cartridges.
16. Wait until the Power light stops blinking, which indicates that the cartridge alignment is complete.

How to Replace an Empty Ink Cartridge in the HP ENVY 4520 All-in-One series Printer – an Illustrated Tutorial in 13 Steps

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP ENVY 4520 series with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP ENVY 4520 All-in-One series Printer?

For your US HP ENVY 4520 All-in-One series Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP ENVY 4520 All-in-One series Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load plain white paper in the input tray.

Remove the old cartridge
3. Open the access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before you proceed.

4. To release the ink cartridge, lift the lid on the ink cartridge slot, then gently push the lid back until it stops. Then, pull up on the ink cartridge to remove it from the slot.

Insert a new cartridge
5. Remove the cartridge from packaging. Be careful to only touch the black plastic on the ink cartridge.

6. Remove the plastic tape from the ink cartridge using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then slide the ink cartridge forward into the slot. Then close the latch until it clicks to secure the ink cartridge into place. Repeat the previous steps to install the other ink cartridge, if needed. The color ink cartridge is on the left, and the black ink cartridge is on the right.

8. Close the ink cartridge access door.

Align cartridges
9. The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. The printer automatically prints an alignment page. Wait for the alignment page to fully eject from the printer.
10. Lift the product lid.
11. Place the alignment page on with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

12. Close the lid, and then touch OK. The product scans the alignment page and completes the alignment process.
13. Discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP OfficeJet 3830 All-in-One series Printer – an Illustrated Tutorial in 14 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP OfficeJet 3830 All-in-One series Printer?

For your US HP OfficeJet 3830 All-in-One series Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP OfficeJet 3830 All-in-One series Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.
2. Check that the printer is loaded with plain, white paper.
3. Open the front door of the printer.

4. Open the cartridge access door and wait for the print carriage to move to the center of the printer. Wait until the carriage is idle and silent before you continue.

5. Press down to release the ink cartridge, and then remove it from the slot.

6. Remove the new ink cartridge from its packaging.

7. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

8. Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the new ink cartridge into its slot. Push the ink cartridge forward into its slot until it snaps into place. Repeat these steps to replace the other ink cartridge, if necessary. Make sure the ink cartridge is inserted in the correct slot.

– The tri-color ink cartridge goes in the slot on the left.
– The black ink cartridge goes in the slot on the right.

9. Close the ink cartridge access door.

10. Close the front door of the printer.

11. Pull out the output tray, and then lift the output tray extender.

12. Press OK to align the ink cartridges. An alignment page prints. Scanning the alignment page allows the printer to align the ink cartridges and provide the best print quality.

13. Lift the scanner lid. Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.

14. Close the scanner lid and touch OK to scan the page and complete the ink cartridge alignment.

How to Replace an Empty Ink Cartridge in the HP OfficeJet 4650 All-in-One series Printer – an Illustrated Tutorial in 12 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP OfficeJet 4650 All-in-One series Printer?

For your US HP OfficeJet 4650 All-in-One series Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP OfficeJet 4650 All-in-One series Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.
2. Check that the printer is loaded with plain, white paper.
3. Open the ink cartridge access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before you proceed.

4. To release the ink cartridge, lift the lid on the ink cartridge slot, then gently push the lid back until it stops. Pull up on the ink cartridge to remove it from the slot.

5. Remove one of the new ink cartridges from its package.

6. Remove the plastic tape from the ink cartridge using the pull tab.

! Do not touch the copper-colored electrical contacts or the ink nozzles !

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then slide the ink cartridge forward into the slot. Close the lid on the ink cartridge slot until it clicks to secure the ink cartridge into place.

8. Repeat the previous steps to install the other ink cartridge, if needed. The color ink cartridge is on the left, and the black ink cartridge is on the right

9. Close the ink cartridge access door.

Align the cartridges.

10. After you install new ink cartridges, the printer automatically prints an alignment page. Wait for the alignment page to fully eject from the printer and lift the scanner lid. If you remove and reinstall the same ink cartridge, the HP All-in-One will not prompt you to align the ink cartridges. The HP All-in-One remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges.
11. Place the alignment page with the print side down on the scanner glass. Position it according to the engraved guides around the glass.

12. Close the scanner lid, then touch OK. The printer aligns the ink cartridges.