All-in-One series – Page 11 – Replacethatpart.com

How to Replace an Empty Ink Cartridge in the HP OfficeJet 3834 All-in-One series Printer – an Illustrated Tutorial in 15 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer software or from the printer control panel.

To check the estimated ink levels from the printer control panel
– From the Home screen, touch the Ink Icon (see below) to display the estimated ink levels.

To check the estimated ink levels from the HP printer software
– Open the HP printer software.
– In the printer software, click the Estimated Ink Levels tab.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP OfficeJet 3834 All-in-One Printer?

For your US HP OfficeJet 3834 All-in-One Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP OfficeJet 3834 All-in-One Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on. It may take a few seconds for the printer to turn on after pressing the power button.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

3. Close the output tray extender, and then rotate the output tray clockwise to stow it in the printer.

Remove the empty cartridge
4. Open the front door of the printer.

5. Open the cartridge access door and wait for the print carriage to move to the center of the printer. Wait until the carriage is idle and silent before you continue.

6. Press down to release the ink cartridge, and then remove it from the slot.

Insert the new cartridge
7. Remove the new ink cartridge from its packaging.

8. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

9. Hold the ink cartridge by its sides with the nozzles toward the printer, and then insert the new ink cartridge into its slot. Push the ink cartridge forward into its slot until it snaps into place. Repeat these steps to replace the other ink cartridge, if necessary. Make sure the ink cartridge is inserted in the correct slot.

– The tri-color ink cartridge goes in the slot on the left.
– The black ink cartridge goes in the slot on the right.

10. Close the ink cartridge access door.

11. Close the front door of the printer.

12. Pull out the output tray, and then lift the output tray extender.

Align the ink cartridges
13. Press OK to align the ink cartridges. An alignment page prints. Scanning the alignment page allows the printer to align the ink cartridges and provide the best print quality.

14. Lift the scanner lid. Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.

15. Close the scanner lid and touch OK to scan the page and complete the ink cartridge alignment.

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display on the product.

To align the cartridges or printhead from the printer software (Windows):
– Open the HP printer software.
– In the printer software, click Print, Scan & Fax > Maintain Your Printer to access the Printer Toolbox window.
– From the Device Services tab, click Align Ink Cartridges. The printer prints an alignment sheet.
– Now go to step 14.

To align the cartridges or printhead from the printer control panel:
– On the printer control panel, from the Home screen, touch Setup.
– Touch Tools.
– Touch Align Printer.
– Now go to step 14.

How to Replace an Empty Ink Cartridge in the HP OfficeJet Pro 6975 All-in-One series – an Illustrated Tutorial in 9 Steps

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control panel or from the printer software. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until prompted to do so.

To check the estimated ink levels from the printer control panel:
From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch the ink icon to check the estimated ink levels.

Which ink cartridges do I need for my HP OfficeJet Pro 6975 printer?

For your US HP OfficeJet Pro 6975 All-in-One printer you need 1 HP 902 Black OR HP 906XL cartridge AND 3 color cartridges: HP 902 Cyan/Magenta/Yellow cartridges. There are also Combo Packs (4 cartridges in one pack) available, like the HP 902XL Black and Cyan/Magenta/Yellow. Check the price of HP 902 cartridges at Amazon.com .

For your European or UK HP OfficeJet Pro 6975 All-in-One printer you need 1 HP 903 Black OR HP 907XL cartridge AND 3 color cartridges: HP 903 Cyan + HP 903 Magenta + HP 903 Yellow cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges.

1. Check that power is on. If the product is off, press the Power button to turn on the product. Wait until the product is idle and silent before continuing.

Remove the old cartridge
2. Open the cartridge access door.
Locate the two slots on the sides of the printer. Place your fingers in the slots, and then lift to open the ink cartridge access door. Wait until the carriage is idle and silent before you proceed.

3. Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.

Insert the new cartridge
4. Remove the new ink cartridge from its packaging by pulling the orange pull-tab straight back to remove the plastic wrap from the ink cartridge. Make sure you remove the orange pull-tab completely. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to vent the cartridge. Do not touch the copper-colored electrical contacts and ink port.

5. Remove the orange cap from the cartridge. Twist the cap counter-clockwise until it snaps off. A forceful twist may be required to remove the cap.

6. Gently bend the tab away from the ink cartridge.

7. Hold the ink cartridge so that the ink cartridge contacts are facing down and toward the printer. Match the colored dot on the ink cartridge with the dot of the same color on the carriage. Slide the new ink cartridge into its slot, and then gently press the ink cartridge down until it clicks into place and is seated firmly in the slot. Make sure that the color-coded letter on the cartridge matches that on the slot.

8. Repeat step 3 through 7 for each ink cartridge you are replacing.

9. Close the cartridge access door.

Align the printhead only if necessary.
The printer automatically aligns the printhead during the initial setup. However, you might want to use this feature for print quality issues in printouts where straight lines look wavy or jagged. You can align the printhead from the printer control panel, from the HP printer software and from the embedded web server (EWS).

How to Replace an Empty Ink Cartridge in the HP ENVY 4516 All-in-One series Printer – an Illustrated Tutorial in 13 Steps

You can check the estimated ink levels from the printer control panel, from the HP printer software, and from HP Utility.

To check the estimated ink levels from the printer control panel
– From the Home screen, touch the Ink icon (see below) to display the estimated ink levels.

To check the ink levels from the printer software (Windows)
– Open the HP printer software.
– In the printer software, click Estimated Ink Levels.

To check the ink levels from HP Utility
– Open HP Utility. HP Utility is located in the Hewlett-Packard folder in the Applications folder at the top level of the hard disk.
– Select the HP ENVY 4510 from the list of devices at the left of the window.
– Click Supplies Status. The estimated ink levels appear.
– Click All Settings to return to the Information and Support pane.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP ENVY 4516 with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Which ink cartridges do I need for my HP ENVY 4516 All-in-One Printer?

For your US HP ENVY 4516 All-in-One Printer you need HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP ENVY 4516 All-in-One Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load plain white paper in the input tray.

Remove the old cartridge
3. Open the access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before you proceed.

4. To release the ink cartridge, lift the lid on the ink cartridge slot, then gently push the lid back until it stops. Then, pull up on the ink cartridge to remove it from the slot.

Insert a new cartridge
5. Remove the cartridge from packaging. Be careful to only touch the black plastic on the ink cartridge.

6. Remove the plastic tape from the ink cartridge using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then slide the ink cartridge forward into the slot. Then close the latch until it clicks to secure the ink cartridge into place. Repeat the previous steps to install the other ink cartridge, if needed. The color ink cartridge is on the left, and the black ink cartridge is on the right.

8. Close the ink cartridge access door.

Align the new cartridges
9. The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. The printer automatically prints an alignment page. Wait for the alignment page to fully eject from the printer.

10. Lift the product lid.
11. Place the alignment page on with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

12. Close the lid, and then touch OK. The product scans the alignment page and completes the alignment process.
13. Discard or recycle the alignment page.

How to Replace an Empty Ink Cartridge in the HP OfficeJet 3833 All-in-One series Printer – an Illustrated Tutorial in 15 Steps

You can check the estimated ink levels from the printer software or from the printer control panel.

To check the estimated ink levels from the printer control panel
– From the Home screen, touch the Ink Icon (see below) to display the estimated ink levels.

To check the estimated ink levels from the HP printer software
– Open the HP printer software.
– In the printer software, click the Estimated Ink Levels tab.

Which ink cartridges do I need for my HP OfficeJet 3833 All-in-One Printer?

For your US HP OfficeJet 3833 All-in-One Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP OfficeJet 3833 All-in-One Printer you need HP 302 or HP 302XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on. It may take a few seconds for the printer to turn on after pressing the Power button.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

3. Close the output tray extender, and then rotate the output tray clockwise to stow it in the printer.

Remove the empty cartridge
4. Open the front door of the printer.

5. Open the cartridge access door and wait for the print carriage to move to the center of the printer. Wait until the carriage is idle and silent before you continue.

6. Press down to release the ink cartridge, and then remove it from the slot.

Insert the new cartridge
7. Remove the new ink cartridge from its packaging.

8. Remove the plastic tape using the pull tab.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.

– The tri-color ink cartridge goes in the slot on the left.
– The black ink cartridge goes in the slot on the right.

10. Close the ink cartridge access door.

11. Close the front door of the printer.

12. Pull out the output tray, and then lift the output tray extender.

14. Lift the scanner lid. Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.

15. Close the scanner lid and touch OK to scan the page and complete the ink cartridge alignment.

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display on the product.