How to Replace an Empty Ink Cartridge in the HP ENVY 4524 All-in-One series Printer – an Illustrated Tutorial in 14 Steps

disclosure

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original new HP ink cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Use the single-cartridge mode to operate the HP ENVY 4524 with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Which ink cartridges do I need for my HP ENVY 4524 All-in-One Printer?
For your US HP ENVY 4524 All-in-One Printer you need
HP 63 OR HP 63XL cartridges. Check the price of HP 63 cartridges at Amazon.com .
For your European or UK HP ENVY 4524 All-in-One Printer you need HP 302 or HP 302XL cartridges.

There are also Combo Packs (2 cartridges in one pack) available, like the HP 63 Black and Tri-color Original Ink Cartridges, 2 Cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load unused plain white Letter or A4-sized paper into the input tray, if you have not already done so.

Remove the old cartridge
3. Open the access door. The carriage moves to the center of the printer. Wait until the carriage is idle and silent before you proceed.

4. To release the ink cartridge, lift the lid on the ink cartridge slot, then gently push the lid back until it stops. Then, pull up on the ink cartridge to remove it from the slot.

Insert a new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

6. Pull the coloured tab to remove the plastic tape.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then slide the ink cartridge forward into the slot. Then close the latch until it clicks to secure the ink cartridge into place. The color ink cartridge is on the left, and the black ink cartridge is on the right.

8. Repeat the previous steps to install the other ink cartridge, if needed.

9. Close the ink cartridge access door.

Align the cartridges
10. The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. The printer automatically prints an alignment page. Wait for the alignment page to fully eject from the printer.

11. Lift the product lid.
12. Place the alignment page on with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.

13. Close the lid, and then touch OK. The product scans the alignment page and completes the alignment process.
14. Discard or recycle the alignment page.



Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

By proceeding you understand and give your consent that your IP address and browser information might be processed by the security plugins installed on this site.
×