How to Replace an Empty Ink Cartridge in the HP Deskjet 1056 series Printer

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Deskjet, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the product can only print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 1056 series Printer?

For your US HP Deskjet 1056 series Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 1056 series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.

2. Load plain white paper, if you have not already done so.

3. Open the cartridge access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.
hp deskjet 1056 all-in-one series_01

4. Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.
hp deskjet 1056 all-in-one series_02

5. Insert the new cartridge.
a. Remove cartridge from packaging.
hp deskjet 1056 all-in-one series_03
b. Remove plastic tape using pink pull tab.
hp deskjet 1056 all-in-one series_04
! Do not touch the copper-colored electrical contacts or the ink nozzles. Also, do not re-tape the cartridges. Doing so can result in clogs, ink failure, and bad electrical connections. !
do not touch contacts

6. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.
hp deskjet 1056 all-in-one series_05

7. Push the cartridge forward until it snaps into place.
hp deskjet 1056 all-in-one series_06

8. Repeat these steps to replace the other cartridge, if necessary.

9. Close the cartridge access door.
hp deskjet 1056 all-in-one series_07

10. Wait about 30 seconds for the alignment page to automatically print.
hp deskjet 1056 all-in-one series_08

Align the cartridges

Aligning the cartridges ensures high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

1. Lift the scanner lid.
2. Place the alignment page with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
hp deskjet 1056 all-in-one series_09

3. Close the scanner lid.
4. Press the Start Copy Black button to begin the scan. The product automatically aligns the cartridges.
5. Wait until the Power light stops blinking, which indicates that the cartridge alignment is complete.

How to Replace an Empty Ink Cartridge in the HP ENVY 5535 e-All-in-One Series Printer

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP ENVY 5535 e-All-in-One Series Printer?

For your US HP ENVY 5535 e-All-in-One Series Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP ENVY 5535 e-All-in-One Series Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Check that power is on.

2. Remove the old cartridge.
a. Open the cartridge access door. To do this, locate the cutouts on the site of the printer. Use this cutouts to lift the cartridge access door and wait for the print carriage to move to the right side of the product.
hp envy 5530 e_01
b. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops.
c. Pull up on the cartridge to remove it from the slot.
hp envy 5530 e_02

3. Insert the new cartridge.
a. Remove cartridge from packaging.
hp envy 5530 e_03
b. Remove plastic tape using pink pull tab.
hp envy 5530 e_04
! Do not touch the copper-colored electrical contacts or the ink nozzles !
do not touch contacts
c. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the printer, and then slide the cartridge into the empty slot, and then squeeze the lid closed as the cartridge slides into place. The color cartridge is on the left, and the black cartridge is on the right.
hp envy 5530 e_05
d. Close access door.
hp envy 5530 e_06

4. Close the scanner lid.
hp envy 5530 e_07

5. Align the cartridges when prompted to do so.
Aligning the cartridges ensures the high-quality output. If you remove and reinstall the
same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges.

Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges and prints an alignment page.

How to Replace an Empty Ink Cartridge in the HP Officejet 2620 All-in-One Printer

1. Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Officejet, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Which ink cartridges do I need for my HP Officejet 2620 e-All-in-One Printer?

For your US HP Officejet 2620 e-All-in-One Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Officejet 2620 e-All-in-One Printer you need HP 301 or HP 301XL cartridges.

2. Check that power is on.

3. Load paper.

4. Remove cartridge.
a. Open the cartridge access door and wait for the print carriage to move to the center of the printer.
hp officejet 2620_01
b. Press down to release the ink cartridge, and then remove it from the slot.
hp officejet 2620_02

5. Insert new ink cartridge.
a. Remove the ink cartridge from the packaging.
hp officejet 2620_03
b. Remove the plastic tape using the pink pull tab.
hp officejet 2620_04
! Do not touch the copper-colored electrical contacts or the ink nozzles !
do not touch contacts
c. Slide the ink cartridge into slot until it clicks into place.
hp officejet 2620_05
d. Close the cartridge access door.
hp officejet 2620_06

The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge. The printer usually prints an alignment sheet automatically. If it doesn’t, go to your printer software to print the alignment sheet manually.

6. Load the alignment sheet print-side down on the right front corner of the scanner glass.
hp officejet 2620_07

7. Follow the instructions on the printer display to align the cartridges. Recycle or discard the cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3000 Printer Series

1. Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP Deskjet, but you can also leave one ink cartridge carriage empty (single-cartridge mode). During single-cartridge mode, the product can only print jobs from the computer.

Which ink cartridges do I need for my HP Deskjet 3000 series Printer?

For your US HP Deskjet 3000 Printer series you need
HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP Deskjet 3000 Printer series you need HP 301 or HP 301XL cartridges.

2. Check that power is on.

3. Load paper.

4. Remove cartridge.
a. Open cartridge door.
hp deskjet 3000_01
Wait for print carriage to move to the center of the product
b. Press down to release the cartridge, then remove it from the slot.
hp deskjet 3000_02

5. Insert the new cartridge.
a. Remove cartridge from packaging.
hp deskjet 3000_03
b. Remove plastic tape using pink pull tab.
hp deskjet 3000_04
! Do not touch the copper-colored electrical contacts or the ink nozzles. Also, do not re-tape the cartridges. !
do not touch contacts
c. Slide cartridge into its slot until it clicks into place. The color cartridge is on the left, and the black cartridge is on the right.
d. Repeat these steps to insert the other cartridge, if necessary.
hp deskjet 3000_05
f. Close cartridge door.
hp deskjet 3000_06

6. Align cartridges.
a. Open the printer software.
b. Double-click Printer Actions, and then double-click Maintenance Tasks. The HP Toolbox opens.
c. Click the Device Services tab, and then click Align Ink Cartridges. The printer aligns the cartridges and then prints an alignment page.