How to Replace an Empty Ink Cartridge in the HP OfficeJet 200 Mobile series Printer – an Illustrated Tutorial in 9 Steps

HP OfficeJet 200 Portable Printer with Wireless & Mobile Printing (CZ993A)

Make sure you purchase the right ink cartridges for your specific printer and printer region (or have your old ones refilled). Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use Original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Printing when one of the ink cartridges is empty
For regular usage, the HP OfficeJet 200 is not designed to print using only one cartridge. However, when one cartridge runs out of ink, you can remove it and use the other cartridge to continue printing. The printer supports this capability only if the cartridge has sufficient ink. Printing with one cartridge might slow the printer and affect the quality of printouts. Therefore, you should replace the empty cartridge as soon as possible.

Which ink cartridges do I need for my HP OfficeJet 200 Mobile series Printer?

For your US, European and UK HP OfficeJet 200 Mobile series you need HP 62 Black and HP 62 Tri-Color cartridges or HP 62XL Black and HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack.

Replace the cartridges

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. Wait until the product is idle and silent bfore continuing.
hp officejet 200_01

2. Load Letter, A4, or Legal unused plain white paper into the paper tray.


Remove the empty cartridge
3. Open the ink cartridge access door. Wait until the carriage is idle and silent before you continue.
hp officejet 200_02

4. To release the ink cartridge, lift the ink cartridge latch. Gentely pull the cartridge toward you out of its slot, and set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.
hp officejet 200_03

Insert new cartridge
5. Remove the new ink cartridge from its package. Be careful to touch only the black plastic on the ink cartridge.
hp officejet 200_04

6. Remove the protective tape from the ink cartridge.
hp officejet 200_05

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the ink cartridge by its sides with the nozzles toward the printer, then insert the ink cartridge into its correct slot. Insert the new ink cartridge into its slot, and then press the ink cartridge forward until it latches into place. Close the latch as illustrated below. Insert the tri-color ink cartridge into the left slot. Insert the black ink cartridge into the right slot.
hp officejet 200_06

8. Repeat steps 4 through 7 for the other cartridge if needed.

9. Close the ink cartridge access door. The printer automatically aligns any newly installed ink cartridge.
hp officejet 200_07

Align the cartridges
If the printer did not automatically align the ink cartridges, align the ink cartridges through the printer control panel:

– From the home screen on the printer control panel, use the arrow buttons ▼ ▲ to select Setup, and then press OK.
– Press the down arrow ▼ to select Tools, and then press OK.
– Press the down arrow ▼ to select Align Printer, and then press OK. Aligning… displays on the control panel. The printer might beep or make mechanical noises, and then the printer prints an alignment page.