Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.
XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.
Use the single-cartridge mode to operate the HP Officejet 8040 series with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the
Which ink cartridges do I need for my HP Officejet 8040 e-All-in-One series Printer?
For your US, European and UK HP Officejet 8040 e-All-in-One series Printer you need HP 62 Black and HP 62 Tri-Color cartridges or HP 62XL Black and HP 62XL Tri-Color cartridges. There are also Combo Packs (2 cartridges in one pack) available, like the HP 62XL/62 High Yield Black and Standard Tricolor Ink Cartridges Combo Pack.
Replace the cartridges
1. Before you replace the cartridges load plain white paper in the input tray.
2. Press the Power button to turn on the printer, if it is not already on.
3. Open the cartridge access door by placing two fingers under one or both of the small handles on the sides of the cartridge access door and then lifting it up. The Door Open screen displays on the printer control panel with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ A Change Ink option also displays on the bottom right corner of the touchscreen. Touch Change Ink to watch a video on the touchscreen about replacing the cartridges (optional).
Remove the old cartridge
4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot, and then set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.
7. Reinsert the cartridge by sliding it at a slight upward angle into the empty slot, and then gently pushing up on the cartridge until it snaps into place. Repeat these steps to replace the other cartridge, if necessary. Reinsert the tri-color cartridge into the left slot. Reinsert the black cartridge into the right slot .
8. Close the cartridge access door.
When the door is completely closed, the Door Open screen with the message, ‘The cover or door must be closed to print. Check that it is completely closed.’ disappears, and the printer returns to the Home screen.
Align the cartridges
Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you to align the cartridges every time you install a new cartridge. If you remove and reinstall the same ink cartridge, the HP Officejet 8040 e-All-in-One series Printer will NOT prompt you to align the ink cartridges. The HP All-in-One remembers the alignment values for that ink cartridge, so you do not need to realign the ink cartridges. Follow the instructions on the printer display to align the cartridges. You can also align the cartridges from the printer software.
9. Touch OK after closing the cartridge access door.
10. Wait for the printer to calibrate and align the cartridges. After the alignment is complete, the printer prints an alignment page.
11. Touch OK, and then discard or recycle the alignment page.
The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:
– On the printer control panel, touch Setup.
– Touch Printer Maintenance , and then touch Align Printer.
– Follow the instructions on the control panel to complete the alignment process.