How to Replace an Empty Ink Cartridge in the HP Deskjet D4160 Printer series – an Illustrated Tutorial in 11 Steps

HP Deskjet D4160 Printer

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use Original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. However, (original) HP XL cartridges for the HP Deskjet D4160 Printer are NOT available in the US.

Three print cartridges can be used with the printer. For everyday printing: Use a black cartridge along with a tri-color cartridge. For printing quality color photos: Use a photo cartridge along with a tri-color cartridge. Always install the tri-color print cartridge in the left side of the print cartridge cradle. Install the black OR photo print cartridge in the right side of the print cartridge cradle.
hp deskjet d4160_01
1 Black print cartridge
2 Tri-color print cartridge
3 Photo print cartridge

You can check the ink levels by using the software installed with the HP Deskjet. To check the ink levels:
– Open the printer Toolbox.
– Click the Estimated Ink Levels tab.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. You’ll usually install both the black and tri-color cartridges in the Deskjet, but you can use the ink-backup mode to operate the HP Deskjet with only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts.

Which ink cartridges do I need for my HP Deskjet HP Deskjet D4160 Printer series Printer?

For your US HP Deskjet D4160 Printer you need
HP 98 Black AND HP 93 Tri-color cartridges.
For printing photos use HP 99 Photo Original cartridges.
For your European or UK HP Deskjet D4160 Printer you need HP 337 Black or HP 336 Black cartridges AND HP 343 Tri-color or HP 344 Tri-color cartridges.
For printing photos use HP 348 Photo cartridges.

Replace the cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.
hp deskjet d4160_02


2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove the empty cartridge
3. Open the printer cover. The carriage moves to the right side of the printer. Wait until the carriage is idle and silent before proceeding.
hp deskjet d4160_03

4. Press down on the cartridge to release it, and then pull it toward you out its slot. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black OR photo cartridge.
hp deskjet d4160_04

Insert new cartridge
5. Remove the new cartridge from its packaging. Be careful to touch only the black plastic.
hp deskjet d4160_05

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

6. Gently remove the plastic tape on the cartridge by pulling the colored pull tab.
hp deskjet d4160_06

7. Hold the new cartridge by its sides. Hold the cartridge so that the copper strips are on the bottom and facing toward the printer. Slide the new print cartridge at a slight upward angle into the empty slot. Then gently push on the upper part of the print cartridge forward until it snaps into place. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing the black OR photo print cartridge, slide it into the right slot.
hp deskjet d4160_07

8. Repeat step 4 to 7 to replace the other cartridge, if needed.

9.Close the printer cover.
hp deskjet d4160_08

Align print cartridges
10. After installing a print cartridge, align the print cartridges to ensure the best print quality.
– Open the printer Toolbox.
– Click Align the Print Cartridges.
– Click Align, and then follow the onscreen instructions.
The HP Deskjet prints a test page, aligns the print cartridges, and calibrates the printer.
11. Recycle or discard the page.