How to Replace an Empty Ink Cartridge in the HP Deskjet 2655 All-in-One series Printer – an Illustrated Tutorial in 11 Steps

HP DeskJet 2655 All-in-One Compact Printer, Instant Ink ready - Noble Blue (V1N01A)

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print almost 3 times as many pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Deskjet 2655 All-in-One series Printer?

For your US HP DeskJet 2655 All-in-One series Printer you need HP 65 Black AND HP 65 Tri-color cartridges OR the XL versions: HP 65XL Black AND HP 65XL Tri-color cartridges.
There are also Multipacks available like the HP 65 Black and Tri-color Original Ink Cartridges, 2 pack.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused plain white Letter or A4-sized paper into the input tray.

Remove cartridge
3. Lower the output tray, reach inside the printer, grasp the handle, and then lower the ink cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.

Insert new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

6. Pull the coloured tab to remove the plastic tape.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.
10. Close the cartridge access door.

Align the cartridges

11. To achieve the best print quality, it is necessary to align the ink cartridges. After installing new ink cartridges, the printer automatically prints an alignment page.

– Lift the scanner lid.
– Place the alignment page with the print side down on the scanner glass, and then position it according to the engraved guides around the glass.

– Close the scanner lid.
– Press the Start Copy Black button or the Start Copy Color button on – the printer control panel. The printer aligns the ink cartridges.

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software.

– Open or search for the HP folder in your list of installed software programs, click the folder for your printer, and then click the name of your printer. HP Printer Assistant opens.
– Click Print & Scan, and then click Maintain Your Printer.
– Click the Device Services tab, and then click Align Ink Cartridges. The printer prints an alignment sheet.
– Now go back to step 11.
– Recycle or discard the cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3752 All-in-One series Printer – an Illustrated Tutorial in 11 Steps

HP DeskJet 3752 Wireless All-in-One Compact Printer with Mobile Printing, Instant Ink ready - Purple Accent (T8W52A)

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print almost 3 times as many pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Deskjet 3752 All-in-One series Printer?

For your US HP DeskJet 3752 All-in-One series Printer you need HP 65 Black AND HP 65 Tri-color cartridges OR the XL versions: HP 65XL Black AND HP 65XL Tri-color cartridges.
There are also Multipacks available like the HP 65 Black and Tri-color Original Ink Cartridges, 2 pack.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused plain white paper into the input tray.

Remove cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.

Insert new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge.

6. Pull the coloured tab to remove the plastic tape.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.
10. Close the cartridge access door.

11. Follow any prompts on the screen.

Align the cartridges

For best print quality, align the ink cartridges:
– Search Windows for the name of your printer, and then click your printer in the list of results. HP Printer Assistant opens.
– Click Maintain Your Printer. The printer toolbox opens.
– On the Device Services tab, click Align Cartridges.
The printer prints an alignment page with rows of numbered boxes. Each box on the page consists of two sets of lines.

– On the alignment page, find the box in row A in which the two sets of lines overlap the most, for example, A10.

In the printer software, select that box from the A drop-down list.
Repeat these steps for each row of boxes on the alignment page.
– Click Done.
– Recycle or discard the cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3720 All-in-One series Printer – an Illustrated Tutorial in 11 Steps

Hp-ipg Ips Cons Aio Low End (2n) Deskjet 3720 Aio 7/10ppm A4 usb

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print almost 3 times as many pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control panel or from the printer software. Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

To check the ink levels from the printer control panel
The Ink Level icons on the printer display show an estimate of ink remaining in the cartridges. The left ink icon shows the estimated ink level of the tri-color cartridge, and the right icon shows the estimated ink level of the black cartridge.

To check the ink levels from the HP printer software (Windows)
Open the HP printer software.
– In the printer software, click the Estimated Levels tab.

Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Deskjet 3720 All-in-One series Printer?

For your US HP DeskJet 3720 All-in-One series Printer you need HP 65 Black AND HP 65 Tri-color cartridges OR the XL versions: HP 65XL Black AND HP 65XL Tri-color cartridges.
There are also Multipacks available like the HP 65 Black and Tri-color Original Ink Cartridges, 2 pack.
For your European or UK HP DeskJet 3720 All-in-One series Printer you need HP 304 Black AND HP 304 Tri-color cartridges OR the XL versions: HP 304XL Black AND HP 304XL Tri-color cartridges.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused, plain white letter or A4-sized paper in the tray, if you have not already done so.

Remove cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.

Insert new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge.

6. Pull the coloured tab to remove the plastic tape.

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.

8. Push the cartridge forward until it snaps into place.

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.
10. Close the cartridge access door.

11. Follow any prompts on the screen.

Align the cartridges
For best print quality, align the ink cartridges:
– Search Windows for the name of your printer, and then click your printer in the list of results. HP Printer Assistant opens.
– Click Maintain Your Printer. The printer toolbox opens.
– On the Device Services tab, click Align Cartridges.
The printer prints an alignment page with rows of numbered boxes. Each box on the page consists of two sets of lines.

– On the alignment page, find the box in row A in which the two sets of lines overlap the most, for example, A10.

In the printer software, select that box from the A drop-down list.
Repeat these steps for each row of boxes on the alignment page.
– Click Done.
– Recycle or discard the cartridge alignment sheet.

How to Replace an Empty Ink Cartridge in the HP Deskjet 3755 All-in-One series Printer – an Illustrated Tutorial in 11 Steps

HP DeskJet 3755 Compact All-in-One Wireless Printer with Mobile Printing, Instant Ink ready - Blue Accent (J9V90A)

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print almost 3 times as many pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

Which ink cartridges do I need for my HP Deskjet 3755 All-in-One series Printer?

For your US HP DeskJet 3755 All-in-One series Printer you need HP 65 Black AND HP 65 Tri-color cartridges OR the XL versions: HP 65XL Black AND HP 65XL Tri-color cartridges.
There are also Multipacks available like the HP 65 Black and Tri-color Original Ink Cartridges, 2 pack.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.
hp deskjet 3755_01

hp deskjet 3755_02

2. Load unused plain white paper into the input tray.

Remove cartridge
3. Open the cartridge access door. The carriage moves to the center of the printer. Wait until the printer is idle and silent before continuing.
hp deskjet 3755_03

4. Lightly press down on the cartridge to release it, and then pull the cartridge out of its slot.
hp deskjet 3755_04

Insert new cartridge
5. Remove the new cartridge from its packaging. Be careful to only touch the black plastic on the ink cartridge.
hp deskjet 3755_05

6. Pull the coloured tab to remove the plastic tape.
hp deskjet 3755_06

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge goes in the slot on the left, and the black cartridge goes in the slot on the right.
hp deskjet 3755_07

8. Push the cartridge forward until it snaps into place.
hp deskjet 3755_08

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.
10. Close the cartridge access door.
hp deskjet 3755_09

11. Follow any prompts on the screen.

Align the cartridges

For best print quality, align the ink cartridges:
– Search Windows for the name of your printer, and then click your printer in the list of results. HP Printer Assistant opens.
– Click Maintain Your Printer. The printer toolbox opens.
– On the Device Services tab, click Align Cartridges.
The printer prints an alignment page with rows of numbered boxes. Each box on the page consists of two sets of lines.
hp deskjet 3755_10

– On the alignment page, find the box in row A in which the two sets of lines overlap the most, for example, A10.
hp deskjet 3755_11

In the printer software, select that box from the A drop-down list.
Repeat these steps for each row of boxes on the alignment page.
– Click Done.
– Recycle or discard the cartridge alignment sheet.