How to Replace an Empty Ink Cartridge in the HP Photosmart C4680 All-in-One Printer – an Illustrated Tutorial in 13 Steps

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. Consider getting replacement print cartridges when you receive a low-ink warning message. This avoids possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

Use the ink-backup mode to operate the printer by using only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. During ink-backup mode, the printer can only print jobs from the computer. You cannot initiate a print job from the control panel (such as copying or scanning an original).

Which ink cartridges do I need for my HP Photosmart C4680 All-in-One printer?

For your US HP Photosmart C4680 All-in-One Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP Photosmart C4680 All-in-One Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Turn the printer on by pressing the On/Off button (power button), if it is not already turned on. It can take a few seconds for the printer to turn on after you press the Power button. Wait until the product is idle and silent before continuing.

2. Pull out the tray extender, and then Load Letter, A4, or Legal unused plain white paper into the paper tray. Slide the stack of paper forward until it stops.

3. Open the ink cartridge access door. The print carriage moves to the center of the device. Wait until the carriage is idle and silent before you continue. If it does not move to the center, turn the device off, then turn it back on again.

Remove the old cartridge
4. Lightly press down on one of the old cartridges to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling. Remove the cartridge from the slot on the left to replace the tri-color cartridge. Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
5. Remove the new ink cartridge from its package. Be careful to touch only the black plastic on the ink cartridge.

6. Remove the protective tape from the ink cartridge by using the coloured pull tab.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the print cartridge so that the copper strips are on the bottom, facing toward the printer and the HP logo is on top. Slide the print cartridge into the slot as shown. Make sure you push the print cartridge in firmly until it snaps into place. Always install the tri-color print cartridge (marked with a triangle) in the left side of the print cartridge cradle. Install the black print cartridge (marked with a square or pentagon) in the right side of the print cartridge cradle.

8. Repeat steps 4 through 7 for the other cartridge if needed.

9. Close the ink cartridge access door.

10. When prompted, press OK. The product prints a print cartridge alignment page.

Align the cartridges
– Load the page print side down on the right front corner of the glass, and then press OK to scan the page. The product aligns the print cartridges.

– Recycle or discard the print cartridge alignment sheet.

The alignment page did not print?
If the alignment fails, check to make sure the cartridges are installed correctly, and start the print cartridge alignment manually. You can align the print cartridges at any time from the device by using the software you installed with the device. If you remove and reinstall the same print cartridge, the device will not prompt you to align the print cartridges. It remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.

In the HP Solution Center, click Settings.
– In the Print Settings area, click Printer Toolbox. The Printer Toolbox appears.
– Click the Device Services tab.
– Click Align the Print Cartridges.
– Go to step 10 and below.

How to Replace an Empty Ink Cartridge in the HP Photosmart C4780 All-in-One Printer – an Illustrated Tutorial in 13 Steps

Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. Consider getting replacement print cartridges when you receive a low-ink warning message. This avoids possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

Use the ink-backup mode to operate the printer by using only one print cartridge. The ink-backup mode is initiated when a print cartridge is removed from the print cartridge carriage. During ink-backup mode, the printer can only print jobs from the computer. Printing in ink-backup mode slows the printer and affects the quality of printouts. When only a black print cartridge is installed, colors will print as grayscale. When only a tri-color print cartridge is installed, colors will print but black is grayed and is not a true black.

Which ink cartridges do I need for my HP Photosmart C4780 All-in-One printer?

For your US HP Photosmart C4780 All-in-One Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP Photosmart C4780 All-in-One Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on. Wait until the product is idle and silent before continuing.
hp photosmart c4780_01

2. Load plain white paper in the input tray.

Remove the old cartridge
3. Open cartridge access door. Wait for print carriage to move to center of the product and wait until the product is idle and silent before continuing.
hp photosmart c4780_02

4. Press down on the top of the cartridge to release it, and then pull it toward you to remove it from its slot.
hp photosmart c4780_03

Insert the new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.
hp photosmart c4780_04

6. Carefully remove the plastic tape using the pink pull tab.
hp photosmart c4780_05



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its color-coded slot until it snaps into place. Make sure that the icon on the cartridge matches the icon on the slot. The tri-color cartridge is on the left side of the carriage. The black cartridge is on the right side of the carriage.
hp photosmart c4780_06

8. Close cartridge door.
hp photosmart c4780_07

Align cartridges
9. When the product detects a new cartridge installed, it prompts you to align the cartridges. Touch OK on the product control panel. The product prints an alignment page.
hp photosmart c4780_08

10. Lift the scanner lid.
hp photosmart c4780_09

11. Place the alignment page on with the printed-side down on the right-front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
hp photosmart c4780_10

12. Close the lid, and then touch OK. The product scans the alignment page and completes the alignment process.
13. Remove alignment page and recycle or discard it.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

– Open HP Solution Center.
– In HP Solution Center, click Settings.
– In the Print Settings area, click Printer Toolbox. The Toolbox opens in a new window.
– In the Toolbox, click the Device Services tab, and then click Align the Print Cartridges.
– A dialog box displays. In the dialog box, click Print Page. The product prints an alignment page.
– Got to step 10.

How to Replace an Empty Ink Cartridge in the HP ENVY 100 e-All-in-One series – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable.

Which ink cartridges do I need for my HP ENVY 100 e-All-in-One Printer?

For your US HP ENVY 100 e-All-in-One Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP ENVY 100 e-All-in-One Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.
hp envy 100_01

2. Load plain Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Open the access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.
hp envy 100_02

4. Lift the lid on the cartridge slot to release the cartridge, and then pull the cartridge out of the slot to remove it.
hp envy 100_03

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.
hp envy 100_04

6. Remove the plastic tape using the pull tab.
hp envy 100_05



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the product, and then slide the cartridge into the empty slot. Insert the color cartridge in the slot on the left. Insert the black cartridge in the slot on the right.
hp envy 100_06

8. Squeeze the lid closed as the cartridge slides into place.
hp envy 100_07

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.

10. Close the access door.
hp envy 100_08

Align the cartridges
After replacing the cartridges, the alignment process should begin automatically. The product prints an alignment page. Once the alignment page has completed printing, your printer will be ready for regular use.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

A. To align printer from the printer display.
– Touch Setup on the product control panel.
– Touch Tools, and then touch Align Printer. The alignment process begins, and the alignment page automatically prints.

B. To align the printer from the computer.
Follow these steps to align the product using the product software.
– Open the HP product software: Click the Windows icon, click All Programs, click HP, click the folder for your HP product, and then click the icon for your HP product. The product software opens.
– In the product software, double-click Printer Actions. Double-click Maintenance Tasks. The HP Toolbox opens.
– On the Device Services tab, click Align Ink Cartridges. The alignment process begins, and the alignment page automatically prints.

Once the alignment page has completed printing, your printer will be ready for regular use.

How to Replace an Empty Ink Cartridge in the HP ENVY 110 e-All-in-One series – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed.

HP recommends that you use original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement ink cartridge available to avoid possible printing delays. You do not have to replace the ink cartridges until the print quality is unacceptable.

Which ink cartridges do I need for my HP ENVY 110 e-All-in-One Printer?

For your US HP ENVY 110 e-All-in-One Printer you need HP 60 OR HP 60XL cartridges. Check the price of HP 60 cartridges at Amazon.com .
For your European or UK HP ENVY 110 e-All-in-One Printer you need HP 300 or HP 300XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.
hp envy 110_01

2. Load plain Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Open the access door. The carriage moves to the center of the product. Wait until the carriage is idle and silent before continuing.
hp envy 110_02

4. Lift the lid on the cartridge slot to release the cartridge, and then pull the cartridge out of the slot to remove it.
hp envy 110_03

Insert a new cartridge
5. Remove the new cartridge from its package. Be careful to touch only the black plastic on the cartridge.
hp envy 110_04

6. Remove the plastic tape using the pull tab.
hp envy 110_05



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge at a slight upward angle with the cartridge contacts facing the rear of the product, and then slide the cartridge into the empty slot. Insert the color cartridge in the slot on the left. Insert the black cartridge in the slot on the right.
hp envy 110_06

8. Squeeze the lid closed as the cartridge slides into place.
hp envy 110_07

9. Repeat step 4 to 8 to replace the other cartridge, if necessary.

10. Close the access door.
hp envy 110_08

Align the cartridges
After replacing the cartridges, the alignment process should begin automatically. The product prints an alignment page. Once the alignment page has completed printing, your printer will be ready for regular use.

The alignment page did not print?
If the printer did not print an alignment page, follow these steps to manually align the printer:

A. To align printer from the printer display.
– Touch Setup on the product control panel.
– Touch Tools, and then touch Align Printer. The alignment process begins, and the alignment page automatically prints.

B. To align the printer from the computer.
Follow these steps to align the product using the product software.
– Open the HP product software: Click the Windows icon, click All Programs, click HP, click the folder for your HP product, and then click the icon for your HP product. The product software opens.
– In the product software, double-click Printer Actions. Double-click Maintenance Tasks. The HP Toolbox opens.
– On the Device Services tab, click Align Ink Cartridges. The alignment process begins, and the alignment page automatically prints.

Once the alignment page has completed printing, your printer will be ready for regular use.