Popal Daily Dutch Basic LED Achterlamp – Batterijen Vervangen – Handleiding

Goed werkende verlichting op fietsen is van levensbelang. Het is dan ook erg belangrijk om de batterijen snel te vervangen als ze leeg of zwak zijn. Dit is een handleiding voor de Popal Daily Dutch Basic LED Achterlamp. Deze handleiding is echter ook vaak voor andere (Popal) fietsen te gebruiken, omdat het achterlicht (bijvoorbeeld de Popal Achterlamp Klein E1, PL786114) ongeveer hetzelfde is. Het vervangen van de batterijen is niet moeilijk; er is alleen een schroevendraaier voor nodig. Het is niet nodig om de hele LED Achterlamp te vervangen of te verwijderen. Het is ook niet nodig om de fiets op te takelen of op zijn kop te zetten.

De Popal Daily Dutch Basic LED Achterlamp werkt met twee standaard alkaline batterijen, type AAA. Deze zijn kleiner dan de grotere AA “Penlight” variant. U kunt ook oplaadbare Ni-MH batterijen gebruiken. De levensduur van de batterijen is dan echter korter.

Benodigdheden
– 1 kleine kruiskopschroevendraaier
– 2 standaard AAA batterijen

1. Lokaliseer het schroefje. De deksel van het achterlicht kan alleen zonder schade van de montageplaat gehaald worden door eerst één klein kruiskopschroefje te verwijderen! Het schroefje bevindt zich net boven de rode voorzijde van de achterlamp.

2. Gebruik de kruiskopschroevendraaier om het schroefje, die de het doorzichtig en rood gekleurde omhulsel (de deksel) van de achterlamp op zijn plaats houdt helemaal los te draaien. Draai naar links, tegen de klok in. Er is maar één schroefje om te verwijderen. Laat de schroef in het plastic omhulsel zitten, zodat dat u hem weer terug kunt vinden.

3. Trek nu het plastic omhulsel van de zwarte montageplaat. Dit gaat heel makkelijk; er is geen kracht voor nodig. Mocht hij niet helemaal loskomen, dan is het schroefje niet helemaal losgedraaid. Draai het dan alsnog helemaal los.

4. Verwijder de lege of zwakke AAA batterijen uit de montageplaat. De eerste rechter batterij kunt u het beste met uw nagel naar voren kantelen. De tweede linker batterij pakt u vervolgens tussen duim en wijsvinger. Vervang altijd beide batterijen, ook als er één nog werkt.

5. Plaats nu 2 nieuwe of opgeladen AAA batterijen in de batterijhouder. Let op dat u de batterijen op de juiste wijze plaatst met de plus- en minkant van de batterijen conform het tekeningetje in de zwarte batterijhouder.

6. Plaats nu het doorzichtig en rood gekleurde omhulsel (de deksel) van de achterlamp weer terug op de zwarte montageplaat. Dit moet heel makkelijk gaan. Er is geen kracht voor nodig.

7. Draai het enkele schroefje weer vast. Draai hiervoor naar rechts, met de klok mee. Alles moet precies passen.

8. Schakel het achterlicht in. De kleine blauwe aan- uit schakelaar bevindt zich aan bovenzijde van de koplamp. Als u de knop indrukt, gaat de lamp aan. Test of de verlichting naar behoren werkt, ook als er aan de fiets geschud wordt en u het achterwiel laat stuiteren.

Dat is alles! De fiets van uw kind is weer klaar voor veilig gebruik.

How to Replace an Empty Ink Cartridge in the HP Officejet Pro L7590 All-in-One series – an Illustrated Tutorial in 8 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer control-panel, the printer Toolbox, and the embedded Web server (EWS).

A. To check the estimated ink levels from the display.
The two-line display of the HP Officejet Pro L7590 shows status and error messages, menu options, and advisory messages. If you insert a memory card or connect a camera, the display goes into photo state and shows the top of the Photo menu. When idle, the display shows the ink levels of the tanks.

B. To check the estimated ink levels from the printer Toolbox (Windows).
Open the Toolbox: From the HP Solution Center, click the Settings menu, point to Print Settings, and then click Printer Toolbox.
– Click the Estimated Ink Levels tab to view the inklevel information, and then scroll to display the Cartridge Details button. Click the Cartridge Details button to view information about replacement ink cartridges.
C. To check the estimated ink levels from the embedded Web server.
The embedded Web server contains pages that you can use to view product information and change device settings. The pages also contain links to other e-services. The Information page shows status information about the device, its ink supplies and usage, and a log of device events (such as errors).

Ink level warnings and indicators provide estimates for planning purposes only. Consider getting replacement print cartridges when you receive a low-ink warning message. This avoids possible printing delays. You do not need to replace the print cartridges until print quality becomes unacceptable.

Which ink cartridges do I need for my HP Officejet Pro L7590 All-in-One Printer?

For your US, European and UK HP Officejet Pro L7590 All-in-One Printer you need HP 88 Black (OR HP 88XL Black) AND 3 color cartridges: HP 88 Cyan, HP 88 Magenta and HP 88 Yellow (OR the XL-versions). There are also Combo Packs (3 cartridges in one pack) available, like the HP 88XL Value Combo Pack Cyan Magenta and Yellow High Yield Original Ink.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the power button to turn on the printer, if it is not already on.

2. Load plain unused Letter or A4 white paper in the input tray.

Remove the old cartridge
3. Gently pull open the ink cartridge cover.

4. Remove the ink cartridge that requires replacement by grasping it between your thumb and forefinger and pulling it firmly toward you.

Note: Your HP Officejet Pro L7590 All-in-One printer may not look exactly like the picture below, but the cartridge numbers and cartridge system are the same.

Insert a new cartridge
5. Remove the new ink cartridge from its package. Be careful to touch only the plastic on the cartridge. Do NOT touch the electrical contacts and ink port.

6. Hold the cartridge by its sides with the nozzle toward the product, and then insert the cartridge into its color-coded slot. Press the cartridge forward into the slot until it snaps into place. Press down firmly on the cartridge to ensure proper contact.

7. If more than one cartridge is low on ink, repeat the steps to insert the other cartridges.
8. Close the ink cartridge cover.

Align the printhead only if necessary.
Whenever you replace a cartridge or printhead, the device automatically aligns the printheads to ensure the best print quality. However, if the appearance of your printed pages indicates that the printheads are misaligned, you can start the alignment process manually. You can align the printhead from the printer control panel, from the HP printer software and from the embedded web server (EWS).
Control panel: Press the Setup button, select Tools, select Align Printer, and then press OK. Press OK when the alignment is done to continue.
Embedded Web server (EWS): Click the Settings tab, click Device Services in the left pane, select Align Printheads from the drop-down list in the Print Quality section, and then click Run Diagnostic.
Toolbox (Windows): Click the Services tab, and then click Align Printheads and follow the onscreen instructions.

How to Replace an Empty Ink Cartridge in the HP ENVY 4501 e-All-in-One Series Printer – an Illustrated Tutorial in 10 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Use the single-cartridge mode to operate the HP ENVY 4501 Printer with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Install both the black and tri-color cartridges in the HP ENVY 4501 to exit single-cartridge mode.

Which ink cartridges do I need for my HP ENVY 4501 e-All-in-One Printer?

For your US HP ENVY 4501 e-All-in-One Printer you need HP 61 OR HP 61XL cartridges. Check the price of HP 61 cartridges at Amazon.com .
For your European or UK HP ENVY 4501 e-All-in-One Printer you need HP 301 or HP 301XL cartridges.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Press the Power button to turn on the printer, if it is not already turned on.

2. Load unused plain white Letter or A4-sized paper into the input tray.

3. Open the scanner lid.

Remove the empty cartridge
4. Open the cartridge access door. Wait for the print carriage to move to the right side of the printer, and wait until the carriage is idle and silent before you continue.

5. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops. Then pull up on the cartridge to remove it from the slot.

Insert the new cartridge
6. Remove the new cartridge from its package. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

7. Pull the coloured tab to remove the protective tape from the cartridge.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

8. Slide the new cartridge in the slot at an angle under the opened lid, and then squeeze the lid closed as the cartridge slides into place.
– Insert the tri-color cartridge into the left slot.
– Insert the black cartridge into the right slot.

9. Repeat the previous steps to install the other cartridge, if necessary.

10. Close the cartridge access door and the scanner lid.

Align the cartridges
Aligning the cartridges ensures the high-quality output. The printer prompts you to align the cartridges every time you install a new cartridge.If you remove and reinstall the same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges.

– Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges and prints an alignment page.
– Load the cartridge alignment sheet print side down on the right front corner of the scanner glass.

– Follow the instructions on the printer display to align the cartridges. Recycle or discard the cartridge alignment sheet.

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display.

A. To align the cartridges from the printer software (Windows)
– In the printer software, click Print & Scan, and then click Maintain Your Printer to access the Printer Toolbox.
– In Printer Toolbox, click Align Cartridges on the Device Services tab. The printer prints an alignment sheet.

B. To align the cartridges from the printer display.
– From the Home screen on the printer display, select Tools. If you do not see the Home screen, press the Home button.
– From the Tools menu on the printer display, select Align Printer. Follow the on-screen instructions.

How to Replace an Empty Ink Cartridge in the HP ENVY Photo 7830 All-in-One series Printer – an Illustrated Tutorial in 9 Steps

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print 2 to 3 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

You can check the estimated ink levels from the printer software or from the printer control panel.
A. To check the estimated ink levels from the printer control panel.
– From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard
– Touch the Ink symbol to check the estimated ink levels.
B. To check the ink levels from the printer software (Windows)
– Open the HP printer software.
– In the printer software, click Estimated Levels at the top of the window.

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable. Use the single-cartridge mode to operate the HP ENVY Photo 7830 All-in-One with only one cartridge. The single-cartridge mode is initiated when an cartridge is removed from the cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.

Which ink cartridges do I need for my HP ENVY Photo 7830 All-in-One Printer?

For your US HP ENVY Photo 7830 All-in-One Printer you need HP 64 Black AND HP 64 Tri-color cartridges (OR the HP 64 XL versions). There are also combo packs available, like the HP 64 Black and Tri-Color Original Ink Cartridges, 2 Cartridges. Check the price of HP 64 cartridges at Amazon.com .
For your European or UK HP ENVY Photo 7830 All-in-One Printer you need HP 303 Black AND HP 303 Tri-color cartridges (OR the HP 303 XL versions). There are also combo packs available, like the HP Z4B62EE 303 Photo Value Pack, Black and Tri-colour, Pack of 2.

Try Amazon's ink selector tool to find compatible ink cartridges for your printer.

Replace the ink cartridges

1. Load unused plain white Letter or A4-sized paper into the input tray.

2. Press the Power button to turn on the printer, if it is not already turned on.

Remove the empty cartridge
3. Open the cartridge access door by placing two fingers under one or both of the small handles on the sides of the cartridge access door and then lifting it up. Wait until the print cartridge cradle is idle and silent before you continue.

4. Lightly press down on the cartridge to release it, and then pull the cartridge toward you out of its slot. Set it aside for recycling.
– Remove the cartridge from the slot on the left to replace the tri-color cartridge.
– Remove the cartridge from the slot on the right to replace the black cartridge.

Insert the new cartridge
5. Remove the new cartridge from its package. Be careful to only touch the black plastic on the ink cartridge by holding the ink cartridge by its sides.

6. Pull the coloured tab to remove the protective tape from the cartridge.



Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot at a slight upward angle. Make sure that the icon on the cartridge matches the icon on the slot.
– Insert the tri-color cartridge into the left slot.
– Insert the black cartridge into the right slot.

8. Repeat steps 5 through 7 to insert the other cartridge, if necessary.

9. Close the cartridge access door. The printer starts an initialization process. It is normal for the printer to make noises during this process.

Align the cartridges
The HP printer software prompts you to align the ink cartridges when you print a document after installing a new ink cartridge.
– Touch OK.
– Wait for the printer to calibrate and align the cartridges. After the alignment is complete, the printer prints an alignment page.

The alignment page did not print?
If the alignment page did not print automatically, you can align the cartridges manually from the printer software and from the printer display.

A. To align the cartridges from the printer software (Windows)
– In the printer software, click Print & Scan, and then click Maintain Your Printer to access the Printer Toolbox.
– In Printer Toolbox, click Align Cartridges on the Device Services tab. The printer prints an alignment sheet.

B. To align the cartridges from the printer display.
– From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, and then touch the setup icon (gear).

– Touch Printer Maintenance, touch Align Cartridges, and then follow the onscreen instructions.