How to Insert a SIM Card into an Alcatel OneTouch 10.16D Dual Sim Cell Phone – Tutorial

Which SIM Card do I need for my Alcatel OneTouch 10.16D Dual Sim Cell Phone?

Make sure you use the correct size SIM card. Depending on the model of phone, there are three sizes of SIM card that can potentially be used in a phone: Standard SIM, Micro SIM and Nano SIM. The three SIM card types work in exactly the same way from a technical perspective. They just differ in the amount of plastic housing that surrounds the metallic chip. The Combi SIM is a Micro SIM card within a Standard SIM-sized unit, so if you need the smaller size of card you simply break the additional plastic away from around the Micro SIM card. This type of card allows networks to cater for more phone users with a single card. A Trio SIM is a Standard, a Micro and a Nano in one. Most of the pay-as-you-go SIM cards you buy from convenience stores operate under this format as they’re more useful to more users.

SpeedTalk Mobile Complete Multi-Purpose Triple Cut SIM Card Starter Kit - No Contract (Universal SIM: Standard, Micro, Nano)

The Alcatel OneTouch 10.16D only accepts 2 big standard SIM size cards. You can also use a combi SIM or trio SIM and NOT break away the plastic from around the SIM card. Only remove the Standard SIM from the plastic card.

Sometimes getting a replacement SIM from your mobile network provider could be a hassle. If you already have a smaller SIM or if you find yourself switching phones around a lot, you may need to adapt — with a SIM adapter — any time you need to go bigger. They are used to transform your sim card into a bigger size which is compatible with your phone. These adapters are quite cheap to purchase, however, getting a good quality adapter would mean that it would be able to let you fit your sim tightly. Using one of those thin flimsy plastic SIM adapters (they usually have a hole in the back) or use one that uses tape to hold the SIM in is NOT recommended. Don’t place an empty SIM adapter in your phone, you must use it with the SIM card already inserted. An empty adapter might damage your phone!

Popular SIM card adapters cards include, but are not limited to:

Samdi Sim Card Adapter Kit Includs Nano Sim Adapter / Micro Sim Adapter / Needle / Storage Sheet( Sim Card Holder ) ,Easy To Use And Storage Without Losing Them

Insert a SIM Card

1. Turn off the power so that you won’t lose any stored information. If the device is on, press and hold the red power/end-call button for a couple of seconds, untill the phone shuts down.

2. Remove the back cover. Hold the device in one hand and find the small notch that will help you to release the cover. It’s on the the bottom-right corner of the phone. Insert a fingernail into the notch. Lift upwards gently to pop the phone open. Working from the bottom-right corner upwards and then lifting the back cover seems to work well. Be careful not to damage your fingernails when you remove the back cover. Also, be certain not to bend or twist the back cover excessively. Doing so may damage the cover.

3. Remove the battery. Using your nail or finger, lift up the battery via the small notch at the top of the battery compartment and lift the battery out of the phone.

4. Place the first SIM 1 card with the gold contacts facing downwards and slide it into the left housing, marked with SIM 1 with the SIM card’s missing corner on the upper-left.

5. Place and optional second SIM 2 card with the gold contacts facing downwards and slight it into the right housing, marked with SIM 2, with the SIM card’s missing corner on the upper-left.

To remove a SIM card, press it downward a little and slight it out in an upward direction.

6. Reinstall the battery. Turn the battery if necessary. The Alcatel logo and the white arrows should be on top. Align the the plus and minus signs and three contacts with the three prongs on the bottom-right side of the battery slot. The large white arrow should be on top, as shown in the picture below. Slide the battery into the battery housing cavity and press down gently to secure it in place. It should fit easily and exactly.

7. Replace the back cover. The Alcatel OneTouch logo on the back should be on top. Gently press the cover down and around the sides of the phone until it clicks into place.

8. Press and hold the Power button. Doing so will turn your phone back on and the device will automatically search for a network.

9. Check if your SIM card is recognized by the device. After ‘Searching netw…’, the name(s) of your network provider(s) should be visible at the top of the display.

Leave a Reply