How to Replace an Empty Ink Cartridge in the HP ENVY 4502 e-All-in-One Series Printer – an Illustrated Tutorial in 9 Steps

ENVY 4502 - Multifunction colour inkjet printer - wireless by HP

Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges. You’ll usually install both the black and tri-color cartridges in the HP ENVY, but you can also leave one ink cartridge carriage empty (single-cartridge mode).

Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

Use the single-cartridge mode to operate the HP ENVY 4502 series with only one ink cartridge. The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. Install both the black and tri-color cartridges in the HP ENVY 4502 series to exit single-cartridge mode.

Which ink cartridges do I need for my HP ENVY 4502 e-All-in-One Series Printer?

For your US HP ENVY 4502 e-All-in-One Series Printer you need
HP 61 or HP 61XL cartridges.
For your European or UK HP ENVY 4502 e-All-in-One Series Printer you need HP 301 or HP 301XL cartridges.

Replace the cartridges

1. Check that power is on.

2. Load paper.

Remove Cartridge
3. Open the cartridge access door. To do this, locate the cutouts on the site of the printer. Use this cutouts to lift the cartridge access door and wait for the print carriage to move to the right side of the printer. Wait until the carriage is idle and silent before you continue.
hp envy 4502_01

4. To release the cartridge, lift the lid on the cartridge slot, and then gently push the lid back until it stops.. Then pull up on the cartridge to remove it from the slot.
hp envy 4502_02

Insert New Cartridge
5. Remove cartridge from packaging.
hp envy 4502_03

6. Remove plastic tape using pink pull tab.
hp envy 4502_04

Do NOT:
– Remove the copper electrical strip.
– Touch the copper-colored contacts or the ink nozzles.
– Replace the protective tape on the contacts.
do not touch contacts

7. Slide the new cartridge in the slot at an angle under the opened lid, and then squeeze the lid closed as the cartridge slides into place. The color cartridge is on the left, and the black cartridge is on the right.
hp envy 4502_05

8. Close the cartridge access door.
hp envy 4502_06

9. Align the cartridges when prompted to do so.
Aligning the cartridges ensures the high-quality output. If you remove and reinstall the same ink cartridge, the HP All-in-One will NOT prompt you to align the ink cartridges. Follow the instructions on the control panel to start the cartridge alignment. The printer aligns the cartridges and prints an alignment page.

If the printer did not print an alignment page, follow these steps:
– On the printer Control Panel, press the Down Arrow to scroll to Tools, and then press OK.
– Press the Down Arrow to scroll to Align Printer, and then press OK. The printer prints an alignment page.

Leave a Reply