Make sure you purchase the right ink cartridges for your specific printer. Cartridges are not compatible between different brands, and often not within the same brand. HP recommends that you use Original HP ink cartridges. XL (Extra Large) cartridges cost more but do provide better value in the long run. They will be able to print at least double the pages of a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.
Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.
Which ink cartridges do I need for my HP Deskjet 3520 e-All-in-One series printer?
For your US HP Deskjet 3520 e-All-in-One series printer you need HP 564 Black and HP 564 Cyan/Magenta/Yellow cartridges.
There are also Combo Packs (4 cartridges in one pack) available, like the HP 564XL Black 564 Color Ink Cartridges Combo Pack.
For your European or UK HP Deskjet 3520 e-All-in-One series printer you need HP 364 cartridges.
There are also Combo Packs (4 cartridges in one pack) available, like the HP 364 Black, Cyan, Magenta, Yellow – Original Ink Cartridge Combo Content Pack – Standard Capacity.
Replace the cartridges.
1. Load plain paper. Whenever you install a new cartridge, the product prompts you to load paper so that you can complete a cartridge alignment.
2. Check that power is on. If the product is off, press the Power button to turn on the product. Wait until the product is idle and silent before continuing.
3. Remove cartridge.
a. Open the cartridge access door. Grasp the handles on either side of the cartridge access door, and then raise the door until it locks into place. The carriage moves to the access area. Wait for print carriage to move to right side of product.
4. Insert new cartridge.
a. Pull the orange tab to remove the plastic wrap from the new cartridge.
Do not touch the copper-colored electrical contacts and ink port !
Make sure you remove the plastic wrap from the ink cartridge before installing it in the product, or printing will fail. When you remove the plastic wrap, the paper label on the top of the cartridge tears slightly, which is necessary to vent the cartridge.
c. With the nozzle and the contacts facing down, push the cartridge into its slot. Press down on the cartridge until it is firmly seated. Make sure that the color icon on the cartridge label matches the color icon on the slot.
d. Repeat thease steps for each ink cartridge you are replacing.
5. After you load new cartridges and close the cartridge access door, the printer automatically prompts you to print an alignment page. Follow these steps to align the cartridges:
e. Close the lid.
f. Press OK. The product scans the alignment page.
g. Follow the control panel instructions to complete the alignment.
h. Recycle or discard the alignment page.